grep portability fix: don't use "-e" or "-q"

System V versions of grep (such as Solaris /usr/bin/grep)
don't understand either of these options. git's usage of
"grep -e pattern" fell into one of two categories:

 1. equivalent to "grep pattern". -e is only useful here if
    the pattern begins with a "-", but all of the patterns
    are hardcoded and do not begin with a dash.

 2. stripping comments and blank lines with

      grep -v -e "^$" -e "^#"

    We can fortunately do this in the affirmative as

      grep '^[^#]'

Uses of "-q" can be replaced with redirection to /dev/null.
In many tests, however, "grep -q" is used as "if this string
is in the expected output, we are OK". In this case, it is
fine to just remove the "-q" entirely; it simply makes the
"verbose" mode of the test slightly more verbose.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

git-rebase--interactive.sh

@@ -78,8 +78,8 @@ mark_action_done () {
 	sed -e 1q < "$TODO" >> "$DONE"
 	sed -e 1d < "$TODO" >> "$TODO".new
 	mv -f "$TODO".new "$TODO"
-	count=$(($(grep -ve '^$' -e '^#' < "$DONE" | wc -l)))
-	total=$(($count+$(grep -ve '^$' -e '^#' < "$TODO" | wc -l)))
+	count=$(grep -c '^[^#]' < "$DONE")
+	total=$(($count+$(grep -c '^[^#]' < "$TODO")))
 	if test "$last_count" != "$count"
 	then
 		last_count=$count
@@ -110,7 +110,7 @@ die_abort () {
 }
 
 has_action () {
-	grep -vqe '^$' -e '^#' "$1"
+	grep '^[^#]' "$1" >/dev/null
 }
 
 pick_one () {

git-submodule.sh

@@ -230,7 +230,7 @@ cmd_init()
 		shift
 	done
 
-	git ls-files --stage -- "$@" | grep -e '^160000 ' |
+	git ls-files --stage -- "$@" | grep '^160000 ' |
 	while read mode sha1 stage path
 	do
 		# Skip already registered paths
@@ -284,7 +284,7 @@ cmd_update()
 		shift
 	done
 
-	git ls-files --stage -- "$@" | grep -e '^160000 ' |
+	git ls-files --stage -- "$@" | grep '^160000 ' |
 	while read mode sha1 stage path
 	do
 		name=$(module_name "$path") || exit
@@ -367,7 +367,7 @@ cmd_status()
 		shift
 	done
 
-	git ls-files --stage -- "$@" | grep -e '^160000 ' |
+	git ls-files --stage -- "$@" | grep '^160000 ' |
 	while read mode sha1 stage path
 	do
 		name=$(module_name "$path") || exit

t/t0030-stripspace.sh

@@ -245,12 +245,12 @@ test_expect_success \
 
 test_expect_success \
     'text plus spaces without newline at end should not show spaces' '
-    ! (printf "$ttt$sss" | git stripspace | grep -q "  ") &&
-    ! (printf "$ttt$ttt$sss" | git stripspace | grep -q "  ") &&
-    ! (printf "$ttt$ttt$ttt$sss" | git stripspace | grep -q "  ") &&
-    ! (printf "$ttt$sss$sss" | git stripspace | grep -q "  ") &&
-    ! (printf "$ttt$ttt$sss$sss" | git stripspace | grep -q "  ") &&
-    ! (printf "$ttt$sss$sss$sss" | git stripspace | grep -q "  ")
+    ! (printf "$ttt$sss" | git stripspace | grep "  " >/dev/null) &&
+    ! (printf "$ttt$ttt$sss" | git stripspace | grep "  " >/dev/null) &&
+    ! (printf "$ttt$ttt$ttt$sss" | git stripspace | grep "  " >/dev/null) &&
+    ! (printf "$ttt$sss$sss" | git stripspace | grep "  " >/dev/null) &&
+    ! (printf "$ttt$ttt$sss$sss" | git stripspace | grep "  " >/dev/null) &&
+    ! (printf "$ttt$sss$sss$sss" | git stripspace | grep "  " >/dev/null)
 '
 
 test_expect_success \
@@ -282,12 +282,12 @@ test_expect_success \
 
 test_expect_success \
     'text plus spaces at end should not show spaces' '
-    ! (echo "$ttt$sss" | git stripspace | grep -q "  ") &&
-    ! (echo "$ttt$ttt$sss" | git stripspace | grep -q "  ") &&
-    ! (echo "$ttt$ttt$ttt$sss" | git stripspace | grep -q "  ") &&
-    ! (echo "$ttt$sss$sss" | git stripspace | grep -q "  ") &&
-    ! (echo "$ttt$ttt$sss$sss" | git stripspace | grep -q "  ") &&
-    ! (echo "$ttt$sss$sss$sss" | git stripspace | grep -q "  ")
+    ! (echo "$ttt$sss" | git stripspace | grep "  " >/dev/null) &&
+    ! (echo "$ttt$ttt$sss" | git stripspace | grep "  " >/dev/null) &&
+    ! (echo "$ttt$ttt$ttt$sss" | git stripspace | grep "  " >/dev/null) &&
+    ! (echo "$ttt$sss$sss" | git stripspace | grep "  " >/dev/null) &&
+    ! (echo "$ttt$ttt$sss$sss" | git stripspace | grep "  " >/dev/null) &&
+    ! (echo "$ttt$sss$sss$sss" | git stripspace | grep "  " >/dev/null)
 '
 
 test_expect_success \
@@ -341,11 +341,11 @@ test_expect_success \
 
 test_expect_success \
     'spaces without newline at end should not show spaces' '
-    ! (printf "" | git stripspace | grep -q " ") &&
-    ! (printf "$sss" | git stripspace | grep -q " ") &&
-    ! (printf "$sss$sss" | git stripspace | grep -q " ") &&
-    ! (printf "$sss$sss$sss" | git stripspace | grep -q " ") &&
-    ! (printf "$sss$sss$sss$sss" | git stripspace | grep -q " ")
+    ! (printf "" | git stripspace | grep " " >/dev/null) &&
+    ! (printf "$sss" | git stripspace | grep " " >/dev/null) &&
+    ! (printf "$sss$sss" | git stripspace | grep " " >/dev/null) &&
+    ! (printf "$sss$sss$sss" | git stripspace | grep " " >/dev/null) &&
+    ! (printf "$sss$sss$sss$sss" | git stripspace | grep " " >/dev/null)
 '
 
 test_expect_success \

t/t3404-rebase-interactive.sh

@@ -149,8 +149,7 @@ test_expect_success 'stop on conflicting pick' '
 	diff -u expect .git/.dotest-merge/patch &&
 	diff -u expect2 file1 &&
 	test 4 = $(grep -v "^#" < .git/.dotest-merge/done | wc -l) &&
-	test 0 = $(grep -ve "^#" -e "^$" < .git/.dotest-merge/git-rebase-todo |
-		wc -l)
+	test 0 = $(grep -c "^[^#]" < .git/.dotest-merge/git-rebase-todo)
 '
 
 test_expect_success 'abort' '

t/t3800-mktag.sh

@@ -15,7 +15,7 @@ check_verify_failure () {
 	expect="$2"
 	test_expect_success "$1" '
 		( ! git-mktag <tag.sig 2>message ) &&
-		grep -q "$expect" message
+		grep "$expect" message
 	'
 }
 

t/t5400-send-pack.sh

@@ -120,7 +120,7 @@ test_expect_success \
 	cd .. &&
 	git-clone parent child && cd child && git-push --all &&
 	cd ../parent &&
-	git-branch -a >branches && ! grep -q origin/master branches
+	git-branch -a >branches && ! grep origin/master branches
 '
 
 rewound_push_setup() {

t/t7502-status.sh

@@ -33,7 +33,7 @@ test_expect_success 'setup' '
 
 test_expect_success 'status (1)' '
 
-	grep -e "use \"git rm --cached <file>\.\.\.\" to unstage" output
+	grep "use \"git rm --cached <file>\.\.\.\" to unstage" output
 
 '
 

t/t7600-merge.sh

@@ -371,7 +371,7 @@ test_expect_success 'override config option -n' '
 	git merge --summary c2 >diffstat.txt &&
 	verify_merge file result.1-5 msg.1-5 &&
 	verify_parents $c1 $c2 &&
-	if ! grep -e "^ file |  *2 +-$" diffstat.txt
+	if ! grep "^ file |  *2 +-$" diffstat.txt
 	then
 		echo "[OOPS] diffstat was not generated"
 	fi
@@ -386,7 +386,7 @@ test_expect_success 'override config option --summary' '
 	git merge -n c2 >diffstat.txt &&
 	verify_merge file result.1-5 msg.1-5 &&
 	verify_parents $c1 $c2 &&
-	if grep -e "^ file |  *2 +-$" diffstat.txt
+	if grep "^ file |  *2 +-$" diffstat.txt
 	then
 		echo "[OOPS] diffstat was generated"
 		false

t/t9400-git-cvsserver-server.sh

@@ -94,7 +94,7 @@ EOF
 
 test_expect_success 'pserver authentication' \
   'cat request-anonymous | git-cvsserver pserver >log 2>&1 &&
-   tail -n1 log | grep -q "^I LOVE YOU$"'
+   tail -n1 log | grep "^I LOVE YOU$"'
 
 test_expect_success 'pserver authentication failure (non-anonymous user)' \
   'if cat request-git | git-cvsserver pserver >log 2>&1
@@ -103,11 +103,11 @@ test_expect_success 'pserver authentication failure (non-anonymous user)' \
    else
        true
    fi &&
-   tail -n1 log | grep -q "^I HATE YOU$"'
+   tail -n1 log | grep "^I HATE YOU$"'
 
 test_expect_success 'pserver authentication (login)' \
   'cat login-anonymous | git-cvsserver pserver >log 2>&1 &&
-   tail -n1 log | grep -q "^I LOVE YOU$"'
+   tail -n1 log | grep "^I LOVE YOU$"'
 
 test_expect_success 'pserver authentication failure (login/non-anonymous user)' \
   'if cat login-git | git-cvsserver pserver >log 2>&1
@@ -116,7 +116,7 @@ test_expect_success 'pserver authentication failure (login/non-anonymous user)'
    else
        true
    fi &&
-   tail -n1 log | grep -q "^I HATE YOU$"'
+   tail -n1 log | grep "^I HATE YOU$"'
 
 
 # misuse pserver authentication for testing of req_Root
@@ -146,15 +146,15 @@ test_expect_success 'req_Root failure (relative pathname)' \
    else
        true
    fi &&
-   tail log | grep -q "^error 1 Root must be an absolute pathname$"'
+   tail log | grep "^error 1 Root must be an absolute pathname$"'
 
 test_expect_success 'req_Root failure (conflicting roots)' \
   'cat request-conflict | git-cvsserver pserver >log 2>&1 &&
-   tail log | grep -q "^error 1 Conflicting roots specified$"'
+   tail log | grep "^error 1 Conflicting roots specified$"'
 
 test_expect_success 'req_Root (strict paths)' \
   'cat request-anonymous | git-cvsserver --strict-paths pserver $SERVERDIR >log 2>&1 &&
-   tail -n1 log | grep -q "^I LOVE YOU$"'
+   tail -n1 log | grep "^I LOVE YOU$"'
 
 test_expect_success 'req_Root failure (strict-paths)' '
     ! cat request-anonymous |
@@ -163,7 +163,7 @@ test_expect_success 'req_Root failure (strict-paths)' '
 
 test_expect_success 'req_Root (w/o strict-paths)' \
   'cat request-anonymous | git-cvsserver pserver $WORKDIR/ >log 2>&1 &&
-   tail -n1 log | grep -q "^I LOVE YOU$"'
+   tail -n1 log | grep "^I LOVE YOU$"'
 
 test_expect_success 'req_Root failure (w/o strict-paths)' '
     ! cat request-anonymous |
@@ -181,7 +181,7 @@ EOF
 
 test_expect_success 'req_Root (base-path)' \
   'cat request-base | git-cvsserver --strict-paths --base-path $WORKDIR/ pserver $SERVERDIR >log 2>&1 &&
-   tail -n1 log | grep -q "^I LOVE YOU$"'
+   tail -n1 log | grep "^I LOVE YOU$"'
 
 test_expect_success 'req_Root failure (base-path)' '
     ! cat request-anonymous |
@@ -192,14 +192,14 @@ GIT_DIR="$SERVERDIR" git config --bool gitcvs.enabled false || exit 1
 
 test_expect_success 'req_Root (export-all)' \
   'cat request-anonymous | git-cvsserver --export-all pserver $WORKDIR >log 2>&1 &&
-   tail -n1 log | grep -q "^I LOVE YOU$"'
+   tail -n1 log | grep "^I LOVE YOU$"'
 
 test_expect_success 'req_Root failure (export-all w/o whitelist)' \
   '! (cat request-anonymous | git-cvsserver --export-all pserver >log 2>&1 || false)'
 
 test_expect_success 'req_Root (everything together)' \
   'cat request-base | git-cvsserver --export-all --strict-paths --base-path $WORKDIR/ pserver $SERVERDIR >log 2>&1 &&
-   tail -n1 log | grep -q "^I LOVE YOU$"'
+   tail -n1 log | grep "^I LOVE YOU$"'
 
 GIT_DIR="$SERVERDIR" git config --bool gitcvs.enabled true || exit 1
 
@@ -216,7 +216,7 @@ test_expect_success 'gitcvs.enabled = false' \
    else
      true
    fi &&
-   cat cvs.log | grep -q "GITCVS emulation disabled" &&
+   grep "GITCVS emulation disabled" cvs.log &&
    test ! -d cvswork2'
 
 rm -fr cvswork2
@@ -237,7 +237,7 @@ test_expect_success 'gitcvs.ext.enabled = false' \
    else
      true
    fi &&
-   cat cvs.log | grep -q "GITCVS emulation disabled" &&
+   grep "GITCVS emulation disabled" cvs.log &&
    test ! -d cvswork2'
 
 rm -fr cvswork2