Merge branch 'jk/delta-chain-limit' into maint

"git repack --depth=<n>" for a long time busted the specified depth
when reusing delta from existing packs.  This has been corrected.

* jk/delta-chain-limit:
  pack-objects: convert recursion to iteration in break_delta_chain()
  pack-objects: enforce --depth limit in reused deltas

builtin/pack-objects.c

@@ -1539,6 +1539,8 @@ static int pack_offset_sort(const void *_a, const void *_b)
  *   2. Updating our size/type to the non-delta representation. These were
  *      either not recorded initially (size) or overwritten with the delta type
  *      (type) when check_object() decided to reuse the delta.
+ *
+ *   3. Resetting our delta depth, as we are now a base object.
  */
 static void drop_reused_delta(struct object_entry *entry)
 {
@@ -1552,6 +1554,7 @@ static void drop_reused_delta(struct object_entry *entry)
 			p = &(*p)->delta_sibling;
 	}
 	entry->delta = NULL;
+	entry->depth = 0;
 
 	oi.sizep = &entry->size;
 	oi.typep = &entry->type;
@@ -1570,39 +1573,123 @@ static void drop_reused_delta(struct object_entry *entry)
  * Follow the chain of deltas from this entry onward, throwing away any links
  * that cause us to hit a cycle (as determined by the DFS state flags in
  * the entries).
+ *
+ * We also detect too-long reused chains that would violate our --depth
+ * limit.
  */
 static void break_delta_chains(struct object_entry *entry)
 {
-	/* If it's not a delta, it can't be part of a cycle. */
+	/*
-	if (!entry->delta) {
+	 * The actual depth of each object we will write is stored as an int,
-		entry->dfs_state = DFS_DONE;
+	 * as it cannot exceed our int "depth" limit. But before we break
-		return;
+	 * changes based no that limit, we may potentially go as deep as the
-	}
+	 * number of objects, which is elsewhere bounded to a uint32_t.
+	 */
+	uint32_t total_depth;
+	struct object_entry *cur, *next;
+
+	for (cur = entry, total_depth = 0;
+	     cur;
+	     cur = cur->delta, total_depth++) {
+		if (cur->dfs_state == DFS_DONE) {
+			/*
+			 * We've already seen this object and know it isn't
+			 * part of a cycle. We do need to append its depth
+			 * to our count.
+			 */
+			total_depth += cur->depth;
+			break;
+		}
 
-	switch (entry->dfs_state) {
-	case DFS_NONE:
 		/*
-		 * This is the first time we've seen the object. We mark it as
+		 * We break cycles before looping, so an ACTIVE state (or any
-		 * part of the active potential cycle and recurse.
+		 * other cruft which made its way into the state variable)
+		 * is a bug.
 		 */
-		entry->dfs_state = DFS_ACTIVE;
+		if (cur->dfs_state != DFS_NONE)
-		break_delta_chains(entry->delta);
+			die("BUG: confusing delta dfs state in first pass: %d",
-		entry->dfs_state = DFS_DONE;
+			    cur->dfs_state);
-		break;
 
-	case DFS_DONE:
+		/*
-		/* object already examined, and not part of a cycle */
+		 * Now we know this is the first time we've seen the object. If
-		break;
+		 * it's not a delta, we're done traversing, but we'll mark it
+		 * done to save time on future traversals.
+		 */
+		if (!cur->delta) {
+			cur->dfs_state = DFS_DONE;
+			break;
+		}
 
-	case DFS_ACTIVE:
 		/*
-		 * We found a cycle that needs broken. It would be correct to
+		 * Mark ourselves as active and see if the next step causes
-		 * break any link in the chain, but it's convenient to
+		 * us to cycle to another active object. It's important to do
-		 * break this one.
+		 * this _before_ we loop, because it impacts where we make the
+		 * cut, and thus how our total_depth counter works.
+		 * E.g., We may see a partial loop like:
+		 *
+		 *   A -> B -> C -> D -> B
+		 *
+		 * Cutting B->C breaks the cycle. But now the depth of A is
+		 * only 1, and our total_depth counter is at 3. The size of the
+		 * error is always one less than the size of the cycle we
+		 * broke. Commits C and D were "lost" from A's chain.
+		 *
+		 * If we instead cut D->B, then the depth of A is correct at 3.
+		 * We keep all commits in the chain that we examined.
 		 */
-		drop_reused_delta(entry);
+		cur->dfs_state = DFS_ACTIVE;
-		entry->dfs_state = DFS_DONE;
+		if (cur->delta->dfs_state == DFS_ACTIVE) {
-		break;
+			drop_reused_delta(cur);
+			cur->dfs_state = DFS_DONE;
+			break;
+		}
+	}
+
+	/*
+	 * And now that we've gone all the way to the bottom of the chain, we
+	 * need to clear the active flags and set the depth fields as
+	 * appropriate. Unlike the loop above, which can quit when it drops a
+	 * delta, we need to keep going to look for more depth cuts. So we need
+	 * an extra "next" pointer to keep going after we reset cur->delta.
+	 */
+	for (cur = entry; cur; cur = next) {
+		next = cur->delta;
+
+		/*
+		 * We should have a chain of zero or more ACTIVE states down to
+		 * a final DONE. We can quit after the DONE, because either it
+		 * has no bases, or we've already handled them in a previous
+		 * call.
+		 */
+		if (cur->dfs_state == DFS_DONE)
+			break;
+		else if (cur->dfs_state != DFS_ACTIVE)
+			die("BUG: confusing delta dfs state in second pass: %d",
+			    cur->dfs_state);
+
+		/*
+		 * If the total_depth is more than depth, then we need to snip
+		 * the chain into two or more smaller chains that don't exceed
+		 * the maximum depth. Most of the resulting chains will contain
+		 * (depth + 1) entries (i.e., depth deltas plus one base), and
+		 * the last chain (i.e., the one containing entry) will contain
+		 * whatever entries are left over, namely
+		 * (total_depth % (depth + 1)) of them.
+		 *
+		 * Since we are iterating towards decreasing depth, we need to
+		 * decrement total_depth as we go, and we need to write to the
+		 * entry what its final depth will be after all of the
+		 * snipping. Since we're snipping into chains of length (depth
+		 * + 1) entries, the final depth of an entry will be its
+		 * original depth modulo (depth + 1). Any time we encounter an
+		 * entry whose final depth is supposed to be zero, we snip it
+		 * from its delta base, thereby making it so.
+		 */
+		cur->depth = (total_depth--) % (depth + 1);
+		if (!cur->depth)
+			drop_reused_delta(cur);
+
+		cur->dfs_state = DFS_DONE;
 	}
 }
 

pack-objects.h

@@ -30,12 +30,16 @@ struct object_entry {
 
 	/*
 	 * State flags for depth-first search used for analyzing delta cycles.
+	 *
+	 * The depth is measured in delta-links to the base (so if A is a delta
+	 * against B, then A has a depth of 1, and B a depth of 0).
 	 */
 	enum {
 		DFS_NONE = 0,
 		DFS_ACTIVE,
 		DFS_DONE
 	} dfs_state;
+	int depth;
 };
 
 struct packing_data {

t/t5316-pack-delta-depth.sh

@@ -0,0 +1,93 @@
+#!/bin/sh
+
+test_description='pack-objects breaks long cross-pack delta chains'
+. ./test-lib.sh
+
+# This mirrors a repeated push setup:
+#
+# 1. A client repeatedly modifies some files, makes a
+#      commit, and pushes the result. It does this N times
+#      before we get around to repacking.
+#
+# 2. Each push generates a thin pack with the new version of
+#    various objects. Let's consider some file in the root tree
+#    which is updated in each commit.
+#
+#    When generating push number X, we feed commit X-1 (and
+#    thus blob X-1) as a preferred base. The resulting pack has
+#    blob X as a thin delta against blob X-1.
+#
+#    On the receiving end, "index-pack --fix-thin" will
+#    complete the pack with a base copy of blob X-1.
+#
+# 3. In older versions of git, if we used the delta from
+#    pack X, then we'd always find blob X-1 as a base in the
+#    same pack (and generate a fresh delta).
+#
+#    But with the pack mru, we jump from delta to delta
+#    following the traversal order:
+#
+#      a. We grab blob X from pack X as a delta, putting it at
+#         the tip of our mru list.
+#
+#      b. Eventually we move onto commit X-1. We need other
+#         objects which are only in pack X-1 (in the test code
+#         below, it's the containing tree). That puts pack X-1
+#         at the tip of our mru list.
+#
+#      c. Eventually we look for blob X-1, and we find the
+#         version in pack X-1 (because it's the mru tip).
+#
+# Now we have blob X as a delta against X-1, which is a delta
+# against X-2, and so forth.
+#
+# In the real world, these small pushes would get exploded by
+# unpack-objects rather than "index-pack --fix-thin", but the
+# same principle applies to larger pushes (they only need one
+# repeatedly-modified file to generate the delta chain).
+
+test_expect_success 'create series of packs' '
+	test-genrandom foo 4096 >content &&
+	prev= &&
+	for i in $(test_seq 1 10)
+	do
+		cat content >file &&
+		echo $i >>file &&
+		git add file &&
+		git commit -m $i &&
+		cur=$(git rev-parse HEAD^{tree}) &&
+		{
+			test -n "$prev" && echo "-$prev"
+			echo $cur
+			echo "$(git rev-parse :file) file"
+		} | git pack-objects --stdout >tmp &&
+		git index-pack --stdin --fix-thin <tmp || return 1
+		prev=$cur
+	done
+'
+
+max_chain() {
+	git index-pack --verify-stat-only "$1" >output &&
+	perl -lne '
+	  /chain length = (\d+)/ and $len = $1;
+	  END { print $len }
+	' output
+}
+
+# Note that this whole setup is pretty reliant on the current
+# packing heuristics. We double-check that our test case
+# actually produces a long chain. If it doesn't, it should be
+# adjusted (or scrapped if the heuristics have become too unreliable)
+test_expect_success 'packing produces a long delta' '
+	# Use --window=0 to make sure we are seeing reused deltas,
+	# not computing a new long chain.
+	pack=$(git pack-objects --all --window=0 </dev/null pack) &&
+	test 9 = "$(max_chain pack-$pack.pack)"
+'
+
+test_expect_success '--depth limits depth' '
+	pack=$(git pack-objects --all --depth=5 </dev/null pack) &&
+	test 5 = "$(max_chain pack-$pack.pack)"
+'
+
+test_done