You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

757 lines
19 KiB

/*
* GIT - The information manager from hell
*
* Copyright (C) Linus Torvalds, 2005
*/
#include "cache.h"
#include "quote.h"
#include "cache-tree.h"
#include "tree-walk.h"
#include "builtin.h"
#include "refs.h"
/*
* Default to not allowing changes to the list of files. The
* tool doesn't actually care, but this makes it harder to add
* files to the revision control by mistake by doing something
* like "git update-index *" and suddenly having all the object
* files be revision controlled.
*/
static int allow_add;
static int allow_remove;
static int allow_replace;
static int info_only;
static int force_remove;
static int verbose;
static int mark_valid_only;
"Assume unchanged" git This adds "assume unchanged" logic, started by this message in the list discussion recently: <Pine.LNX.4.64.0601311807470.7301@g5.osdl.org> This is a workaround for filesystems that do not have lstat() that is quick enough for the index mechanism to take advantage of. On the paths marked as "assumed to be unchanged", the user needs to explicitly use update-index to register the object name to be in the next commit. You can use two new options to update-index to set and reset the CE_VALID bit: git-update-index --assume-unchanged path... git-update-index --no-assume-unchanged path... These forms manipulate only the CE_VALID bit; it does not change the object name recorded in the index file. Nor they add a new entry to the index. When the configuration variable "core.ignorestat = true" is set, the index entries are marked with CE_VALID bit automatically after: - update-index to explicitly register the current object name to the index file. - when update-index --refresh finds the path to be up-to-date. - when tools like read-tree -u and apply --index update the working tree file and register the current object name to the index file. The flag is dropped upon read-tree that does not check out the index entry. This happens regardless of the core.ignorestat settings. Index entries marked with CE_VALID bit are assumed to be unchanged most of the time. However, there are cases that CE_VALID bit is ignored for the sake of safety and usability: - while "git-read-tree -m" or git-apply need to make sure that the paths involved in the merge do not have local modifications. This sacrifices performance for safety. - when git-checkout-index -f -q -u -a tries to see if it needs to checkout the paths. Otherwise you can never check anything out ;-). - when git-update-index --really-refresh (a new flag) tries to see if the index entry is up to date. You can start with everything marked as CE_VALID and run this once to drop CE_VALID bit for paths that are modified. Most notably, "update-index --refresh" honours CE_VALID and does not actively stat, so after you modified a file in the working tree, update-index --refresh would not notice until you tell the index about it with "git-update-index path" or "git-update-index --no-assume-unchanged path". This version is not expected to be perfect. I think diff between index and/or tree and working files may need some adjustment, and there probably needs other cases we should automatically unmark paths that are marked to be CE_VALID. But the basics seem to work, and ready to be tested by people who asked for this feature. Signed-off-by: Junio C Hamano <junkio@cox.net>
19 years ago
#define MARK_VALID 1
#define UNMARK_VALID 2
static void report(const char *fmt, ...)
{
va_list vp;
if (!verbose)
return;
va_start(vp, fmt);
vprintf(fmt, vp);
putchar('\n');
va_end(vp);
}
"Assume unchanged" git This adds "assume unchanged" logic, started by this message in the list discussion recently: <Pine.LNX.4.64.0601311807470.7301@g5.osdl.org> This is a workaround for filesystems that do not have lstat() that is quick enough for the index mechanism to take advantage of. On the paths marked as "assumed to be unchanged", the user needs to explicitly use update-index to register the object name to be in the next commit. You can use two new options to update-index to set and reset the CE_VALID bit: git-update-index --assume-unchanged path... git-update-index --no-assume-unchanged path... These forms manipulate only the CE_VALID bit; it does not change the object name recorded in the index file. Nor they add a new entry to the index. When the configuration variable "core.ignorestat = true" is set, the index entries are marked with CE_VALID bit automatically after: - update-index to explicitly register the current object name to the index file. - when update-index --refresh finds the path to be up-to-date. - when tools like read-tree -u and apply --index update the working tree file and register the current object name to the index file. The flag is dropped upon read-tree that does not check out the index entry. This happens regardless of the core.ignorestat settings. Index entries marked with CE_VALID bit are assumed to be unchanged most of the time. However, there are cases that CE_VALID bit is ignored for the sake of safety and usability: - while "git-read-tree -m" or git-apply need to make sure that the paths involved in the merge do not have local modifications. This sacrifices performance for safety. - when git-checkout-index -f -q -u -a tries to see if it needs to checkout the paths. Otherwise you can never check anything out ;-). - when git-update-index --really-refresh (a new flag) tries to see if the index entry is up to date. You can start with everything marked as CE_VALID and run this once to drop CE_VALID bit for paths that are modified. Most notably, "update-index --refresh" honours CE_VALID and does not actively stat, so after you modified a file in the working tree, update-index --refresh would not notice until you tell the index about it with "git-update-index path" or "git-update-index --no-assume-unchanged path". This version is not expected to be perfect. I think diff between index and/or tree and working files may need some adjustment, and there probably needs other cases we should automatically unmark paths that are marked to be CE_VALID. But the basics seem to work, and ready to be tested by people who asked for this feature. Signed-off-by: Junio C Hamano <junkio@cox.net>
19 years ago
static int mark_valid(const char *path)
{
int namelen = strlen(path);
int pos = cache_name_pos(path, namelen);
if (0 <= pos) {
switch (mark_valid_only) {
case MARK_VALID:
active_cache[pos]->ce_flags |= CE_VALID;
"Assume unchanged" git This adds "assume unchanged" logic, started by this message in the list discussion recently: <Pine.LNX.4.64.0601311807470.7301@g5.osdl.org> This is a workaround for filesystems that do not have lstat() that is quick enough for the index mechanism to take advantage of. On the paths marked as "assumed to be unchanged", the user needs to explicitly use update-index to register the object name to be in the next commit. You can use two new options to update-index to set and reset the CE_VALID bit: git-update-index --assume-unchanged path... git-update-index --no-assume-unchanged path... These forms manipulate only the CE_VALID bit; it does not change the object name recorded in the index file. Nor they add a new entry to the index. When the configuration variable "core.ignorestat = true" is set, the index entries are marked with CE_VALID bit automatically after: - update-index to explicitly register the current object name to the index file. - when update-index --refresh finds the path to be up-to-date. - when tools like read-tree -u and apply --index update the working tree file and register the current object name to the index file. The flag is dropped upon read-tree that does not check out the index entry. This happens regardless of the core.ignorestat settings. Index entries marked with CE_VALID bit are assumed to be unchanged most of the time. However, there are cases that CE_VALID bit is ignored for the sake of safety and usability: - while "git-read-tree -m" or git-apply need to make sure that the paths involved in the merge do not have local modifications. This sacrifices performance for safety. - when git-checkout-index -f -q -u -a tries to see if it needs to checkout the paths. Otherwise you can never check anything out ;-). - when git-update-index --really-refresh (a new flag) tries to see if the index entry is up to date. You can start with everything marked as CE_VALID and run this once to drop CE_VALID bit for paths that are modified. Most notably, "update-index --refresh" honours CE_VALID and does not actively stat, so after you modified a file in the working tree, update-index --refresh would not notice until you tell the index about it with "git-update-index path" or "git-update-index --no-assume-unchanged path". This version is not expected to be perfect. I think diff between index and/or tree and working files may need some adjustment, and there probably needs other cases we should automatically unmark paths that are marked to be CE_VALID. But the basics seem to work, and ready to be tested by people who asked for this feature. Signed-off-by: Junio C Hamano <junkio@cox.net>
19 years ago
break;
case UNMARK_VALID:
active_cache[pos]->ce_flags &= ~CE_VALID;
"Assume unchanged" git This adds "assume unchanged" logic, started by this message in the list discussion recently: <Pine.LNX.4.64.0601311807470.7301@g5.osdl.org> This is a workaround for filesystems that do not have lstat() that is quick enough for the index mechanism to take advantage of. On the paths marked as "assumed to be unchanged", the user needs to explicitly use update-index to register the object name to be in the next commit. You can use two new options to update-index to set and reset the CE_VALID bit: git-update-index --assume-unchanged path... git-update-index --no-assume-unchanged path... These forms manipulate only the CE_VALID bit; it does not change the object name recorded in the index file. Nor they add a new entry to the index. When the configuration variable "core.ignorestat = true" is set, the index entries are marked with CE_VALID bit automatically after: - update-index to explicitly register the current object name to the index file. - when update-index --refresh finds the path to be up-to-date. - when tools like read-tree -u and apply --index update the working tree file and register the current object name to the index file. The flag is dropped upon read-tree that does not check out the index entry. This happens regardless of the core.ignorestat settings. Index entries marked with CE_VALID bit are assumed to be unchanged most of the time. However, there are cases that CE_VALID bit is ignored for the sake of safety and usability: - while "git-read-tree -m" or git-apply need to make sure that the paths involved in the merge do not have local modifications. This sacrifices performance for safety. - when git-checkout-index -f -q -u -a tries to see if it needs to checkout the paths. Otherwise you can never check anything out ;-). - when git-update-index --really-refresh (a new flag) tries to see if the index entry is up to date. You can start with everything marked as CE_VALID and run this once to drop CE_VALID bit for paths that are modified. Most notably, "update-index --refresh" honours CE_VALID and does not actively stat, so after you modified a file in the working tree, update-index --refresh would not notice until you tell the index about it with "git-update-index path" or "git-update-index --no-assume-unchanged path". This version is not expected to be perfect. I think diff between index and/or tree and working files may need some adjustment, and there probably needs other cases we should automatically unmark paths that are marked to be CE_VALID. But the basics seem to work, and ready to be tested by people who asked for this feature. Signed-off-by: Junio C Hamano <junkio@cox.net>
19 years ago
break;
}
cache_tree_invalidate_path(active_cache_tree, path);
"Assume unchanged" git This adds "assume unchanged" logic, started by this message in the list discussion recently: <Pine.LNX.4.64.0601311807470.7301@g5.osdl.org> This is a workaround for filesystems that do not have lstat() that is quick enough for the index mechanism to take advantage of. On the paths marked as "assumed to be unchanged", the user needs to explicitly use update-index to register the object name to be in the next commit. You can use two new options to update-index to set and reset the CE_VALID bit: git-update-index --assume-unchanged path... git-update-index --no-assume-unchanged path... These forms manipulate only the CE_VALID bit; it does not change the object name recorded in the index file. Nor they add a new entry to the index. When the configuration variable "core.ignorestat = true" is set, the index entries are marked with CE_VALID bit automatically after: - update-index to explicitly register the current object name to the index file. - when update-index --refresh finds the path to be up-to-date. - when tools like read-tree -u and apply --index update the working tree file and register the current object name to the index file. The flag is dropped upon read-tree that does not check out the index entry. This happens regardless of the core.ignorestat settings. Index entries marked with CE_VALID bit are assumed to be unchanged most of the time. However, there are cases that CE_VALID bit is ignored for the sake of safety and usability: - while "git-read-tree -m" or git-apply need to make sure that the paths involved in the merge do not have local modifications. This sacrifices performance for safety. - when git-checkout-index -f -q -u -a tries to see if it needs to checkout the paths. Otherwise you can never check anything out ;-). - when git-update-index --really-refresh (a new flag) tries to see if the index entry is up to date. You can start with everything marked as CE_VALID and run this once to drop CE_VALID bit for paths that are modified. Most notably, "update-index --refresh" honours CE_VALID and does not actively stat, so after you modified a file in the working tree, update-index --refresh would not notice until you tell the index about it with "git-update-index path" or "git-update-index --no-assume-unchanged path". This version is not expected to be perfect. I think diff between index and/or tree and working files may need some adjustment, and there probably needs other cases we should automatically unmark paths that are marked to be CE_VALID. But the basics seem to work, and ready to be tested by people who asked for this feature. Signed-off-by: Junio C Hamano <junkio@cox.net>
19 years ago
active_cache_changed = 1;
return 0;
}
return -1;
}
static int remove_one_path(const char *path)
{
if (!allow_remove)
return error("%s: does not exist and --remove not passed", path);
if (remove_file_from_cache(path))
return error("%s: cannot remove from the index", path);
return 0;
}
/*
* Handle a path that couldn't be lstat'ed. It's either:
* - missing file (ENOENT or ENOTDIR). That's ok if we're
* supposed to be removing it and the removal actually
* succeeds.
* - permission error. That's never ok.
*/
static int process_lstat_error(const char *path, int err)
{
if (err == ENOENT || err == ENOTDIR)
return remove_one_path(path);
return error("lstat(\"%s\"): %s", path, strerror(errno));
}
static int add_one_path(struct cache_entry *old, const char *path, int len, struct stat *st)
{
int option, size;
struct cache_entry *ce;
/* Was the old index entry already up-to-date? */
if (old && !ce_stage(old) && !ce_match_stat(old, st, 0))
return 0;
size = cache_entry_size(len);
ce = xcalloc(1, size);
memcpy(ce->name, path, len);
ce->ce_flags = len;
fill_stat_cache_info(ce, st);
ce->ce_mode = ce_mode_from_stat(old, st->st_mode);
if (index_path(ce->sha1, path, st, !info_only))
return -1;
option = allow_add ? ADD_CACHE_OK_TO_ADD : 0;
option |= allow_replace ? ADD_CACHE_OK_TO_REPLACE : 0;
if (add_cache_entry(ce, option))
return error("%s: cannot add to the index - missing --add option?", path);
return 0;
}
/*
* Handle a path that was a directory. Four cases:
*
* - it's already a gitlink in the index, and we keep it that
* way, and update it if we can (if we cannot find the HEAD,
* we're going to keep it unchanged in the index!)
*
* - it's a *file* in the index, in which case it should be
* removed as a file if removal is allowed, since it doesn't
* exist as such any more. If removal isn't allowed, it's
* an error.
*
* (NOTE! This is old and arguably fairly strange behaviour.
* We might want to make this an error unconditionally, and
* use "--force-remove" if you actually want to force removal).
*
* - it used to exist as a subdirectory (ie multiple files with
* this particular prefix) in the index, in which case it's wrong
* to try to update it as a directory.
*
* - it doesn't exist at all in the index, but it is a valid
* git directory, and it should be *added* as a gitlink.
*/
static int process_directory(const char *path, int len, struct stat *st)
{
unsigned char sha1[20];
int pos = cache_name_pos(path, len);
/* Exact match: file or existing gitlink */
if (pos >= 0) {
struct cache_entry *ce = active_cache[pos];
if (S_ISGITLINK(ce->ce_mode)) {
/* Do nothing to the index if there is no HEAD! */
if (resolve_gitlink_ref(path, "HEAD", sha1) < 0)
return 0;
return add_one_path(ce, path, len, st);
}
/* Should this be an unconditional error? */
return remove_one_path(path);
}
/* Inexact match: is there perhaps a subdirectory match? */
pos = -pos-1;
while (pos < active_nr) {
struct cache_entry *ce = active_cache[pos++];
if (strncmp(ce->name, path, len))
break;
if (ce->name[len] > '/')
break;
if (ce->name[len] < '/')
continue;
/* Subdirectory match - error out */
return error("%s: is a directory - add individual files instead", path);
}
/* No match - should we add it as a gitlink? */
if (!resolve_gitlink_ref(path, "HEAD", sha1))
return add_one_path(NULL, path, len, st);
/* Error out. */
return error("%s: is a directory - add files inside instead", path);
}
/*
* Process a regular file
*/
static int process_file(const char *path, int len, struct stat *st)
{
int pos = cache_name_pos(path, len);
struct cache_entry *ce = pos < 0 ? NULL : active_cache[pos];
if (ce && S_ISGITLINK(ce->ce_mode))
return error("%s is already a gitlink, not replacing", path);
return add_one_path(ce, path, len, st);
}
static int process_path(const char *path)
{
int len;
struct stat st;
len = strlen(path);
if (has_symlink_leading_path(len, path))
return error("'%s' is beyond a symbolic link", path);
/*
* First things first: get the stat information, to decide
* what to do about the pathname!
*/
if (lstat(path, &st) < 0)
return process_lstat_error(path, errno);
if (S_ISDIR(st.st_mode))
return process_directory(path, len, &st);
return process_file(path, len, &st);
}
update-index: allow --index-info to add higher stages. The new merge world order tells the merge strategies to leave the cache unmerged and store the automerge result in the working tree if automerge is not clean. This was done for the resolve strategy and recursive strategy when no rename is involved, but recording a conflicting merge in the rename case could not easily be done by the recursive strategy. This commit adds a new input format, in addition to the exsting two, to "update-index --index-info". (1) mode SP sha1 TAB path The first format is what "git-apply --index-info" reports, and used to reconstruct a partial tree that is used for phony merge base tree when falling back on 3-way merge. (2) mode SP type SP sha1 TAB path The second format is to stuff git-ls-tree output into the index file. (3) mode SP sha1 SP stage TAB path This format is to put higher order stages into the index file and matches git-ls-files --stage output. To place a higher stage entry to the index, the path should first be removed by feeding a mode=0 entry for the path, and then feeding necessary input lines in the (3) format. For example, starting with this index: $ git ls-files -s 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 0 frotz $ git update-index --index-info ;# interactive session -- input follows... 0 0000000000000000000000000000000000000000 frotz 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 1 frotz 100755 8a1218a1024a212bb3db30becd860315f9f3ac52 2 frotz The first line of the input feeds 0 as the mode to remove the path; the SHA1 does not matter as long as it is well formatted. Then the second and third line feeds stage 1 and stage 2 entries for that path. After the above, we would end up with this: $ git ls-files -s 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 1 frotz 100755 8a1218a1024a212bb3db30becd860315f9f3ac52 2 frotz This completes the groundwork for the new merge world order. Signed-off-by: Junio C Hamano <junkio@cox.net>
19 years ago
static int add_cacheinfo(unsigned int mode, const unsigned char *sha1,
const char *path, int stage)
{
int size, len, option;
struct cache_entry *ce;
update-index: allow --index-info to add higher stages. The new merge world order tells the merge strategies to leave the cache unmerged and store the automerge result in the working tree if automerge is not clean. This was done for the resolve strategy and recursive strategy when no rename is involved, but recording a conflicting merge in the rename case could not easily be done by the recursive strategy. This commit adds a new input format, in addition to the exsting two, to "update-index --index-info". (1) mode SP sha1 TAB path The first format is what "git-apply --index-info" reports, and used to reconstruct a partial tree that is used for phony merge base tree when falling back on 3-way merge. (2) mode SP type SP sha1 TAB path The second format is to stuff git-ls-tree output into the index file. (3) mode SP sha1 SP stage TAB path This format is to put higher order stages into the index file and matches git-ls-files --stage output. To place a higher stage entry to the index, the path should first be removed by feeding a mode=0 entry for the path, and then feeding necessary input lines in the (3) format. For example, starting with this index: $ git ls-files -s 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 0 frotz $ git update-index --index-info ;# interactive session -- input follows... 0 0000000000000000000000000000000000000000 frotz 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 1 frotz 100755 8a1218a1024a212bb3db30becd860315f9f3ac52 2 frotz The first line of the input feeds 0 as the mode to remove the path; the SHA1 does not matter as long as it is well formatted. Then the second and third line feeds stage 1 and stage 2 entries for that path. After the above, we would end up with this: $ git ls-files -s 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 1 frotz 100755 8a1218a1024a212bb3db30becd860315f9f3ac52 2 frotz This completes the groundwork for the new merge world order. Signed-off-by: Junio C Hamano <junkio@cox.net>
19 years ago
if (!verify_path(path))
return error("Invalid path '%s'", path);
update-index: allow --index-info to add higher stages. The new merge world order tells the merge strategies to leave the cache unmerged and store the automerge result in the working tree if automerge is not clean. This was done for the resolve strategy and recursive strategy when no rename is involved, but recording a conflicting merge in the rename case could not easily be done by the recursive strategy. This commit adds a new input format, in addition to the exsting two, to "update-index --index-info". (1) mode SP sha1 TAB path The first format is what "git-apply --index-info" reports, and used to reconstruct a partial tree that is used for phony merge base tree when falling back on 3-way merge. (2) mode SP type SP sha1 TAB path The second format is to stuff git-ls-tree output into the index file. (3) mode SP sha1 SP stage TAB path This format is to put higher order stages into the index file and matches git-ls-files --stage output. To place a higher stage entry to the index, the path should first be removed by feeding a mode=0 entry for the path, and then feeding necessary input lines in the (3) format. For example, starting with this index: $ git ls-files -s 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 0 frotz $ git update-index --index-info ;# interactive session -- input follows... 0 0000000000000000000000000000000000000000 frotz 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 1 frotz 100755 8a1218a1024a212bb3db30becd860315f9f3ac52 2 frotz The first line of the input feeds 0 as the mode to remove the path; the SHA1 does not matter as long as it is well formatted. Then the second and third line feeds stage 1 and stage 2 entries for that path. After the above, we would end up with this: $ git ls-files -s 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 1 frotz 100755 8a1218a1024a212bb3db30becd860315f9f3ac52 2 frotz This completes the groundwork for the new merge world order. Signed-off-by: Junio C Hamano <junkio@cox.net>
19 years ago
len = strlen(path);
size = cache_entry_size(len);
ce = xcalloc(1, size);
hashcpy(ce->sha1, sha1);
update-index: allow --index-info to add higher stages. The new merge world order tells the merge strategies to leave the cache unmerged and store the automerge result in the working tree if automerge is not clean. This was done for the resolve strategy and recursive strategy when no rename is involved, but recording a conflicting merge in the rename case could not easily be done by the recursive strategy. This commit adds a new input format, in addition to the exsting two, to "update-index --index-info". (1) mode SP sha1 TAB path The first format is what "git-apply --index-info" reports, and used to reconstruct a partial tree that is used for phony merge base tree when falling back on 3-way merge. (2) mode SP type SP sha1 TAB path The second format is to stuff git-ls-tree output into the index file. (3) mode SP sha1 SP stage TAB path This format is to put higher order stages into the index file and matches git-ls-files --stage output. To place a higher stage entry to the index, the path should first be removed by feeding a mode=0 entry for the path, and then feeding necessary input lines in the (3) format. For example, starting with this index: $ git ls-files -s 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 0 frotz $ git update-index --index-info ;# interactive session -- input follows... 0 0000000000000000000000000000000000000000 frotz 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 1 frotz 100755 8a1218a1024a212bb3db30becd860315f9f3ac52 2 frotz The first line of the input feeds 0 as the mode to remove the path; the SHA1 does not matter as long as it is well formatted. Then the second and third line feeds stage 1 and stage 2 entries for that path. After the above, we would end up with this: $ git ls-files -s 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 1 frotz 100755 8a1218a1024a212bb3db30becd860315f9f3ac52 2 frotz This completes the groundwork for the new merge world order. Signed-off-by: Junio C Hamano <junkio@cox.net>
19 years ago
memcpy(ce->name, path, len);
ce->ce_flags = create_ce_flags(len, stage);
ce->ce_mode = create_ce_mode(mode);
"Assume unchanged" git This adds "assume unchanged" logic, started by this message in the list discussion recently: <Pine.LNX.4.64.0601311807470.7301@g5.osdl.org> This is a workaround for filesystems that do not have lstat() that is quick enough for the index mechanism to take advantage of. On the paths marked as "assumed to be unchanged", the user needs to explicitly use update-index to register the object name to be in the next commit. You can use two new options to update-index to set and reset the CE_VALID bit: git-update-index --assume-unchanged path... git-update-index --no-assume-unchanged path... These forms manipulate only the CE_VALID bit; it does not change the object name recorded in the index file. Nor they add a new entry to the index. When the configuration variable "core.ignorestat = true" is set, the index entries are marked with CE_VALID bit automatically after: - update-index to explicitly register the current object name to the index file. - when update-index --refresh finds the path to be up-to-date. - when tools like read-tree -u and apply --index update the working tree file and register the current object name to the index file. The flag is dropped upon read-tree that does not check out the index entry. This happens regardless of the core.ignorestat settings. Index entries marked with CE_VALID bit are assumed to be unchanged most of the time. However, there are cases that CE_VALID bit is ignored for the sake of safety and usability: - while "git-read-tree -m" or git-apply need to make sure that the paths involved in the merge do not have local modifications. This sacrifices performance for safety. - when git-checkout-index -f -q -u -a tries to see if it needs to checkout the paths. Otherwise you can never check anything out ;-). - when git-update-index --really-refresh (a new flag) tries to see if the index entry is up to date. You can start with everything marked as CE_VALID and run this once to drop CE_VALID bit for paths that are modified. Most notably, "update-index --refresh" honours CE_VALID and does not actively stat, so after you modified a file in the working tree, update-index --refresh would not notice until you tell the index about it with "git-update-index path" or "git-update-index --no-assume-unchanged path". This version is not expected to be perfect. I think diff between index and/or tree and working files may need some adjustment, and there probably needs other cases we should automatically unmark paths that are marked to be CE_VALID. But the basics seem to work, and ready to be tested by people who asked for this feature. Signed-off-by: Junio C Hamano <junkio@cox.net>
19 years ago
if (assume_unchanged)
ce->ce_flags |= CE_VALID;
option = allow_add ? ADD_CACHE_OK_TO_ADD : 0;
option |= allow_replace ? ADD_CACHE_OK_TO_REPLACE : 0;
if (add_cache_entry(ce, option))
return error("%s: cannot add to the index - missing --add option?",
update-index: allow --index-info to add higher stages. The new merge world order tells the merge strategies to leave the cache unmerged and store the automerge result in the working tree if automerge is not clean. This was done for the resolve strategy and recursive strategy when no rename is involved, but recording a conflicting merge in the rename case could not easily be done by the recursive strategy. This commit adds a new input format, in addition to the exsting two, to "update-index --index-info". (1) mode SP sha1 TAB path The first format is what "git-apply --index-info" reports, and used to reconstruct a partial tree that is used for phony merge base tree when falling back on 3-way merge. (2) mode SP type SP sha1 TAB path The second format is to stuff git-ls-tree output into the index file. (3) mode SP sha1 SP stage TAB path This format is to put higher order stages into the index file and matches git-ls-files --stage output. To place a higher stage entry to the index, the path should first be removed by feeding a mode=0 entry for the path, and then feeding necessary input lines in the (3) format. For example, starting with this index: $ git ls-files -s 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 0 frotz $ git update-index --index-info ;# interactive session -- input follows... 0 0000000000000000000000000000000000000000 frotz 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 1 frotz 100755 8a1218a1024a212bb3db30becd860315f9f3ac52 2 frotz The first line of the input feeds 0 as the mode to remove the path; the SHA1 does not matter as long as it is well formatted. Then the second and third line feeds stage 1 and stage 2 entries for that path. After the above, we would end up with this: $ git ls-files -s 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 1 frotz 100755 8a1218a1024a212bb3db30becd860315f9f3ac52 2 frotz This completes the groundwork for the new merge world order. Signed-off-by: Junio C Hamano <junkio@cox.net>
19 years ago
path);
report("add '%s'", path);
return 0;
}
static void chmod_path(int flip, const char *path)
{
int pos;
struct cache_entry *ce;
unsigned int mode;
pos = cache_name_pos(path, strlen(path));
if (pos < 0)
goto fail;
ce = active_cache[pos];
mode = ce->ce_mode;
if (!S_ISREG(mode))
goto fail;
switch (flip) {
case '+':
ce->ce_mode |= 0111; break;
case '-':
ce->ce_mode &= ~0111; break;
default:
goto fail;
}
cache_tree_invalidate_path(active_cache_tree, path);
active_cache_changed = 1;
report("chmod %cx '%s'", flip, path);
return;
fail:
die("git update-index: cannot chmod %cx '%s'", flip, path);
}
static void update_one(const char *path, const char *prefix, int prefix_length)
{
const char *p = prefix_path(prefix, prefix_length, path);
if (!verify_path(p)) {
fprintf(stderr, "Ignoring path %s\n", path);
goto free_return;
}
"Assume unchanged" git This adds "assume unchanged" logic, started by this message in the list discussion recently: <Pine.LNX.4.64.0601311807470.7301@g5.osdl.org> This is a workaround for filesystems that do not have lstat() that is quick enough for the index mechanism to take advantage of. On the paths marked as "assumed to be unchanged", the user needs to explicitly use update-index to register the object name to be in the next commit. You can use two new options to update-index to set and reset the CE_VALID bit: git-update-index --assume-unchanged path... git-update-index --no-assume-unchanged path... These forms manipulate only the CE_VALID bit; it does not change the object name recorded in the index file. Nor they add a new entry to the index. When the configuration variable "core.ignorestat = true" is set, the index entries are marked with CE_VALID bit automatically after: - update-index to explicitly register the current object name to the index file. - when update-index --refresh finds the path to be up-to-date. - when tools like read-tree -u and apply --index update the working tree file and register the current object name to the index file. The flag is dropped upon read-tree that does not check out the index entry. This happens regardless of the core.ignorestat settings. Index entries marked with CE_VALID bit are assumed to be unchanged most of the time. However, there are cases that CE_VALID bit is ignored for the sake of safety and usability: - while "git-read-tree -m" or git-apply need to make sure that the paths involved in the merge do not have local modifications. This sacrifices performance for safety. - when git-checkout-index -f -q -u -a tries to see if it needs to checkout the paths. Otherwise you can never check anything out ;-). - when git-update-index --really-refresh (a new flag) tries to see if the index entry is up to date. You can start with everything marked as CE_VALID and run this once to drop CE_VALID bit for paths that are modified. Most notably, "update-index --refresh" honours CE_VALID and does not actively stat, so after you modified a file in the working tree, update-index --refresh would not notice until you tell the index about it with "git-update-index path" or "git-update-index --no-assume-unchanged path". This version is not expected to be perfect. I think diff between index and/or tree and working files may need some adjustment, and there probably needs other cases we should automatically unmark paths that are marked to be CE_VALID. But the basics seem to work, and ready to be tested by people who asked for this feature. Signed-off-by: Junio C Hamano <junkio@cox.net>
19 years ago
if (mark_valid_only) {
if (mark_valid(p))
die("Unable to mark file %s", path);
goto free_return;
"Assume unchanged" git This adds "assume unchanged" logic, started by this message in the list discussion recently: <Pine.LNX.4.64.0601311807470.7301@g5.osdl.org> This is a workaround for filesystems that do not have lstat() that is quick enough for the index mechanism to take advantage of. On the paths marked as "assumed to be unchanged", the user needs to explicitly use update-index to register the object name to be in the next commit. You can use two new options to update-index to set and reset the CE_VALID bit: git-update-index --assume-unchanged path... git-update-index --no-assume-unchanged path... These forms manipulate only the CE_VALID bit; it does not change the object name recorded in the index file. Nor they add a new entry to the index. When the configuration variable "core.ignorestat = true" is set, the index entries are marked with CE_VALID bit automatically after: - update-index to explicitly register the current object name to the index file. - when update-index --refresh finds the path to be up-to-date. - when tools like read-tree -u and apply --index update the working tree file and register the current object name to the index file. The flag is dropped upon read-tree that does not check out the index entry. This happens regardless of the core.ignorestat settings. Index entries marked with CE_VALID bit are assumed to be unchanged most of the time. However, there are cases that CE_VALID bit is ignored for the sake of safety and usability: - while "git-read-tree -m" or git-apply need to make sure that the paths involved in the merge do not have local modifications. This sacrifices performance for safety. - when git-checkout-index -f -q -u -a tries to see if it needs to checkout the paths. Otherwise you can never check anything out ;-). - when git-update-index --really-refresh (a new flag) tries to see if the index entry is up to date. You can start with everything marked as CE_VALID and run this once to drop CE_VALID bit for paths that are modified. Most notably, "update-index --refresh" honours CE_VALID and does not actively stat, so after you modified a file in the working tree, update-index --refresh would not notice until you tell the index about it with "git-update-index path" or "git-update-index --no-assume-unchanged path". This version is not expected to be perfect. I think diff between index and/or tree and working files may need some adjustment, and there probably needs other cases we should automatically unmark paths that are marked to be CE_VALID. But the basics seem to work, and ready to be tested by people who asked for this feature. Signed-off-by: Junio C Hamano <junkio@cox.net>
19 years ago
}
if (force_remove) {
if (remove_file_from_cache(p))
die("git update-index: unable to remove %s", path);
report("remove '%s'", path);
goto free_return;
}
if (process_path(p))
die("Unable to process path %s", path);
report("add '%s'", path);
free_return:
if (p < path || p > path + strlen(path))
free((char*)p);
}
static void read_index_info(int line_termination)
{
struct strbuf buf = STRBUF_INIT;
struct strbuf uq = STRBUF_INIT;
while (strbuf_getline(&buf, stdin, line_termination) != EOF) {
char *ptr, *tab;
char *path_name;
unsigned char sha1[20];
unsigned int mode;
unsigned long ul;
update-index: allow --index-info to add higher stages. The new merge world order tells the merge strategies to leave the cache unmerged and store the automerge result in the working tree if automerge is not clean. This was done for the resolve strategy and recursive strategy when no rename is involved, but recording a conflicting merge in the rename case could not easily be done by the recursive strategy. This commit adds a new input format, in addition to the exsting two, to "update-index --index-info". (1) mode SP sha1 TAB path The first format is what "git-apply --index-info" reports, and used to reconstruct a partial tree that is used for phony merge base tree when falling back on 3-way merge. (2) mode SP type SP sha1 TAB path The second format is to stuff git-ls-tree output into the index file. (3) mode SP sha1 SP stage TAB path This format is to put higher order stages into the index file and matches git-ls-files --stage output. To place a higher stage entry to the index, the path should first be removed by feeding a mode=0 entry for the path, and then feeding necessary input lines in the (3) format. For example, starting with this index: $ git ls-files -s 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 0 frotz $ git update-index --index-info ;# interactive session -- input follows... 0 0000000000000000000000000000000000000000 frotz 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 1 frotz 100755 8a1218a1024a212bb3db30becd860315f9f3ac52 2 frotz The first line of the input feeds 0 as the mode to remove the path; the SHA1 does not matter as long as it is well formatted. Then the second and third line feeds stage 1 and stage 2 entries for that path. After the above, we would end up with this: $ git ls-files -s 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 1 frotz 100755 8a1218a1024a212bb3db30becd860315f9f3ac52 2 frotz This completes the groundwork for the new merge world order. Signed-off-by: Junio C Hamano <junkio@cox.net>
19 years ago
int stage;
/* This reads lines formatted in one of three formats:
*
* (1) mode SP sha1 TAB path
* The first format is what "git apply --index-info"
update-index: allow --index-info to add higher stages. The new merge world order tells the merge strategies to leave the cache unmerged and store the automerge result in the working tree if automerge is not clean. This was done for the resolve strategy and recursive strategy when no rename is involved, but recording a conflicting merge in the rename case could not easily be done by the recursive strategy. This commit adds a new input format, in addition to the exsting two, to "update-index --index-info". (1) mode SP sha1 TAB path The first format is what "git-apply --index-info" reports, and used to reconstruct a partial tree that is used for phony merge base tree when falling back on 3-way merge. (2) mode SP type SP sha1 TAB path The second format is to stuff git-ls-tree output into the index file. (3) mode SP sha1 SP stage TAB path This format is to put higher order stages into the index file and matches git-ls-files --stage output. To place a higher stage entry to the index, the path should first be removed by feeding a mode=0 entry for the path, and then feeding necessary input lines in the (3) format. For example, starting with this index: $ git ls-files -s 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 0 frotz $ git update-index --index-info ;# interactive session -- input follows... 0 0000000000000000000000000000000000000000 frotz 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 1 frotz 100755 8a1218a1024a212bb3db30becd860315f9f3ac52 2 frotz The first line of the input feeds 0 as the mode to remove the path; the SHA1 does not matter as long as it is well formatted. Then the second and third line feeds stage 1 and stage 2 entries for that path. After the above, we would end up with this: $ git ls-files -s 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 1 frotz 100755 8a1218a1024a212bb3db30becd860315f9f3ac52 2 frotz This completes the groundwork for the new merge world order. Signed-off-by: Junio C Hamano <junkio@cox.net>
19 years ago
* reports, and used to reconstruct a partial tree
* that is used for phony merge base tree when falling
* back on 3-way merge.
*
* (2) mode SP type SP sha1 TAB path
* The second format is to stuff "git ls-tree" output
update-index: allow --index-info to add higher stages. The new merge world order tells the merge strategies to leave the cache unmerged and store the automerge result in the working tree if automerge is not clean. This was done for the resolve strategy and recursive strategy when no rename is involved, but recording a conflicting merge in the rename case could not easily be done by the recursive strategy. This commit adds a new input format, in addition to the exsting two, to "update-index --index-info". (1) mode SP sha1 TAB path The first format is what "git-apply --index-info" reports, and used to reconstruct a partial tree that is used for phony merge base tree when falling back on 3-way merge. (2) mode SP type SP sha1 TAB path The second format is to stuff git-ls-tree output into the index file. (3) mode SP sha1 SP stage TAB path This format is to put higher order stages into the index file and matches git-ls-files --stage output. To place a higher stage entry to the index, the path should first be removed by feeding a mode=0 entry for the path, and then feeding necessary input lines in the (3) format. For example, starting with this index: $ git ls-files -s 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 0 frotz $ git update-index --index-info ;# interactive session -- input follows... 0 0000000000000000000000000000000000000000 frotz 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 1 frotz 100755 8a1218a1024a212bb3db30becd860315f9f3ac52 2 frotz The first line of the input feeds 0 as the mode to remove the path; the SHA1 does not matter as long as it is well formatted. Then the second and third line feeds stage 1 and stage 2 entries for that path. After the above, we would end up with this: $ git ls-files -s 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 1 frotz 100755 8a1218a1024a212bb3db30becd860315f9f3ac52 2 frotz This completes the groundwork for the new merge world order. Signed-off-by: Junio C Hamano <junkio@cox.net>
19 years ago
* into the index file.
*
update-index: allow --index-info to add higher stages. The new merge world order tells the merge strategies to leave the cache unmerged and store the automerge result in the working tree if automerge is not clean. This was done for the resolve strategy and recursive strategy when no rename is involved, but recording a conflicting merge in the rename case could not easily be done by the recursive strategy. This commit adds a new input format, in addition to the exsting two, to "update-index --index-info". (1) mode SP sha1 TAB path The first format is what "git-apply --index-info" reports, and used to reconstruct a partial tree that is used for phony merge base tree when falling back on 3-way merge. (2) mode SP type SP sha1 TAB path The second format is to stuff git-ls-tree output into the index file. (3) mode SP sha1 SP stage TAB path This format is to put higher order stages into the index file and matches git-ls-files --stage output. To place a higher stage entry to the index, the path should first be removed by feeding a mode=0 entry for the path, and then feeding necessary input lines in the (3) format. For example, starting with this index: $ git ls-files -s 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 0 frotz $ git update-index --index-info ;# interactive session -- input follows... 0 0000000000000000000000000000000000000000 frotz 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 1 frotz 100755 8a1218a1024a212bb3db30becd860315f9f3ac52 2 frotz The first line of the input feeds 0 as the mode to remove the path; the SHA1 does not matter as long as it is well formatted. Then the second and third line feeds stage 1 and stage 2 entries for that path. After the above, we would end up with this: $ git ls-files -s 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 1 frotz 100755 8a1218a1024a212bb3db30becd860315f9f3ac52 2 frotz This completes the groundwork for the new merge world order. Signed-off-by: Junio C Hamano <junkio@cox.net>
19 years ago
* (3) mode SP sha1 SP stage TAB path
* This format is to put higher order stages into the
* index file and matches "git ls-files --stage" output.
update-index: allow --index-info to add higher stages. The new merge world order tells the merge strategies to leave the cache unmerged and store the automerge result in the working tree if automerge is not clean. This was done for the resolve strategy and recursive strategy when no rename is involved, but recording a conflicting merge in the rename case could not easily be done by the recursive strategy. This commit adds a new input format, in addition to the exsting two, to "update-index --index-info". (1) mode SP sha1 TAB path The first format is what "git-apply --index-info" reports, and used to reconstruct a partial tree that is used for phony merge base tree when falling back on 3-way merge. (2) mode SP type SP sha1 TAB path The second format is to stuff git-ls-tree output into the index file. (3) mode SP sha1 SP stage TAB path This format is to put higher order stages into the index file and matches git-ls-files --stage output. To place a higher stage entry to the index, the path should first be removed by feeding a mode=0 entry for the path, and then feeding necessary input lines in the (3) format. For example, starting with this index: $ git ls-files -s 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 0 frotz $ git update-index --index-info ;# interactive session -- input follows... 0 0000000000000000000000000000000000000000 frotz 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 1 frotz 100755 8a1218a1024a212bb3db30becd860315f9f3ac52 2 frotz The first line of the input feeds 0 as the mode to remove the path; the SHA1 does not matter as long as it is well formatted. Then the second and third line feeds stage 1 and stage 2 entries for that path. After the above, we would end up with this: $ git ls-files -s 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 1 frotz 100755 8a1218a1024a212bb3db30becd860315f9f3ac52 2 frotz This completes the groundwork for the new merge world order. Signed-off-by: Junio C Hamano <junkio@cox.net>
19 years ago
*/
errno = 0;
ul = strtoul(buf.buf, &ptr, 8);
if (ptr == buf.buf || *ptr != ' '
|| errno || (unsigned int) ul != ul)
goto bad_line;
mode = ul;
tab = strchr(ptr, '\t');
if (!tab || tab - ptr < 41)
goto bad_line;
update-index: allow --index-info to add higher stages. The new merge world order tells the merge strategies to leave the cache unmerged and store the automerge result in the working tree if automerge is not clean. This was done for the resolve strategy and recursive strategy when no rename is involved, but recording a conflicting merge in the rename case could not easily be done by the recursive strategy. This commit adds a new input format, in addition to the exsting two, to "update-index --index-info". (1) mode SP sha1 TAB path The first format is what "git-apply --index-info" reports, and used to reconstruct a partial tree that is used for phony merge base tree when falling back on 3-way merge. (2) mode SP type SP sha1 TAB path The second format is to stuff git-ls-tree output into the index file. (3) mode SP sha1 SP stage TAB path This format is to put higher order stages into the index file and matches git-ls-files --stage output. To place a higher stage entry to the index, the path should first be removed by feeding a mode=0 entry for the path, and then feeding necessary input lines in the (3) format. For example, starting with this index: $ git ls-files -s 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 0 frotz $ git update-index --index-info ;# interactive session -- input follows... 0 0000000000000000000000000000000000000000 frotz 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 1 frotz 100755 8a1218a1024a212bb3db30becd860315f9f3ac52 2 frotz The first line of the input feeds 0 as the mode to remove the path; the SHA1 does not matter as long as it is well formatted. Then the second and third line feeds stage 1 and stage 2 entries for that path. After the above, we would end up with this: $ git ls-files -s 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 1 frotz 100755 8a1218a1024a212bb3db30becd860315f9f3ac52 2 frotz This completes the groundwork for the new merge world order. Signed-off-by: Junio C Hamano <junkio@cox.net>
19 years ago
if (tab[-2] == ' ' && '0' <= tab[-1] && tab[-1] <= '3') {
update-index: allow --index-info to add higher stages. The new merge world order tells the merge strategies to leave the cache unmerged and store the automerge result in the working tree if automerge is not clean. This was done for the resolve strategy and recursive strategy when no rename is involved, but recording a conflicting merge in the rename case could not easily be done by the recursive strategy. This commit adds a new input format, in addition to the exsting two, to "update-index --index-info". (1) mode SP sha1 TAB path The first format is what "git-apply --index-info" reports, and used to reconstruct a partial tree that is used for phony merge base tree when falling back on 3-way merge. (2) mode SP type SP sha1 TAB path The second format is to stuff git-ls-tree output into the index file. (3) mode SP sha1 SP stage TAB path This format is to put higher order stages into the index file and matches git-ls-files --stage output. To place a higher stage entry to the index, the path should first be removed by feeding a mode=0 entry for the path, and then feeding necessary input lines in the (3) format. For example, starting with this index: $ git ls-files -s 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 0 frotz $ git update-index --index-info ;# interactive session -- input follows... 0 0000000000000000000000000000000000000000 frotz 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 1 frotz 100755 8a1218a1024a212bb3db30becd860315f9f3ac52 2 frotz The first line of the input feeds 0 as the mode to remove the path; the SHA1 does not matter as long as it is well formatted. Then the second and third line feeds stage 1 and stage 2 entries for that path. After the above, we would end up with this: $ git ls-files -s 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 1 frotz 100755 8a1218a1024a212bb3db30becd860315f9f3ac52 2 frotz This completes the groundwork for the new merge world order. Signed-off-by: Junio C Hamano <junkio@cox.net>
19 years ago
stage = tab[-1] - '0';
ptr = tab + 1; /* point at the head of path */
tab = tab - 2; /* point at tail of sha1 */
}
else {
stage = 0;
ptr = tab + 1; /* point at the head of path */
}
if (get_sha1_hex(tab - 40, sha1) || tab[-41] != ' ')
goto bad_line;
path_name = ptr;
if (line_termination && path_name[0] == '"') {
strbuf_reset(&uq);
if (unquote_c_style(&uq, path_name, NULL)) {
die("git update-index: bad quoting of path name");
}
path_name = uq.buf;
}
if (!verify_path(path_name)) {
fprintf(stderr, "Ignoring path %s\n", path_name);
continue;
}
if (!mode) {
/* mode == 0 means there is no such path -- remove */
if (remove_file_from_cache(path_name))
die("git update-index: unable to remove %s",
ptr);
}
else {
/* mode ' ' sha1 '\t' name
* ptr[-1] points at tab,
* ptr[-41] is at the beginning of sha1
*/
ptr[-42] = ptr[-1] = 0;
update-index: allow --index-info to add higher stages. The new merge world order tells the merge strategies to leave the cache unmerged and store the automerge result in the working tree if automerge is not clean. This was done for the resolve strategy and recursive strategy when no rename is involved, but recording a conflicting merge in the rename case could not easily be done by the recursive strategy. This commit adds a new input format, in addition to the exsting two, to "update-index --index-info". (1) mode SP sha1 TAB path The first format is what "git-apply --index-info" reports, and used to reconstruct a partial tree that is used for phony merge base tree when falling back on 3-way merge. (2) mode SP type SP sha1 TAB path The second format is to stuff git-ls-tree output into the index file. (3) mode SP sha1 SP stage TAB path This format is to put higher order stages into the index file and matches git-ls-files --stage output. To place a higher stage entry to the index, the path should first be removed by feeding a mode=0 entry for the path, and then feeding necessary input lines in the (3) format. For example, starting with this index: $ git ls-files -s 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 0 frotz $ git update-index --index-info ;# interactive session -- input follows... 0 0000000000000000000000000000000000000000 frotz 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 1 frotz 100755 8a1218a1024a212bb3db30becd860315f9f3ac52 2 frotz The first line of the input feeds 0 as the mode to remove the path; the SHA1 does not matter as long as it is well formatted. Then the second and third line feeds stage 1 and stage 2 entries for that path. After the above, we would end up with this: $ git ls-files -s 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 1 frotz 100755 8a1218a1024a212bb3db30becd860315f9f3ac52 2 frotz This completes the groundwork for the new merge world order. Signed-off-by: Junio C Hamano <junkio@cox.net>
19 years ago
if (add_cacheinfo(mode, sha1, path_name, stage))
die("git update-index: unable to update %s",
path_name);
}
continue;
bad_line:
die("malformed index info %s", buf.buf);
}
strbuf_release(&buf);
strbuf_release(&uq);
}
static const char update_index_usage[] =
"git update-index [-q] [--add] [--replace] [--remove] [--unmerged] [--refresh] [--really-refresh] [--cacheinfo] [--chmod=(+|-)x] [--assume-unchanged] [--info-only] [--force-remove] [--stdin] [--index-info] [--unresolve] [--again | -g] [--ignore-missing] [-z] [--verbose] [--] <file>...";
static unsigned char head_sha1[20];
static unsigned char merge_head_sha1[20];
static struct cache_entry *read_one_ent(const char *which,
unsigned char *ent, const char *path,
int namelen, int stage)
{
unsigned mode;
unsigned char sha1[20];
int size;
struct cache_entry *ce;
if (get_tree_entry(ent, path, sha1, &mode)) {
if (which)
error("%s: not in %s branch.", path, which);
return NULL;
}
if (mode == S_IFDIR) {
if (which)
error("%s: not a blob in %s branch.", path, which);
return NULL;
}
size = cache_entry_size(namelen);
ce = xcalloc(1, size);
hashcpy(ce->sha1, sha1);
memcpy(ce->name, path, namelen);
ce->ce_flags = create_ce_flags(namelen, stage);
ce->ce_mode = create_ce_mode(mode);
return ce;
}
static int unresolve_one(const char *path)
{
int namelen = strlen(path);
int pos;
int ret = 0;
struct cache_entry *ce_2 = NULL, *ce_3 = NULL;
/* See if there is such entry in the index. */
pos = cache_name_pos(path, namelen);
if (pos < 0) {
/* If there isn't, either it is unmerged, or
* resolved as "removed" by mistake. We do not
* want to do anything in the former case.
*/
pos = -pos-1;
if (pos < active_nr) {
struct cache_entry *ce = active_cache[pos];
if (ce_namelen(ce) == namelen &&
!memcmp(ce->name, path, namelen)) {
fprintf(stderr,
"%s: skipping still unmerged path.\n",
path);
goto free_return;
}
}
}
/* Grab blobs from given path from HEAD and MERGE_HEAD,
* stuff HEAD version in stage #2,
* stuff MERGE_HEAD version in stage #3.
*/
ce_2 = read_one_ent("our", head_sha1, path, namelen, 2);
ce_3 = read_one_ent("their", merge_head_sha1, path, namelen, 3);
if (!ce_2 || !ce_3) {
ret = -1;
goto free_return;
}
if (!hashcmp(ce_2->sha1, ce_3->sha1) &&
ce_2->ce_mode == ce_3->ce_mode) {
fprintf(stderr, "%s: identical in both, skipping.\n",
path);
goto free_return;
}
remove_file_from_cache(path);
if (add_cache_entry(ce_2, ADD_CACHE_OK_TO_ADD)) {
error("%s: cannot add our version to the index.", path);
ret = -1;
goto free_return;
}
if (!add_cache_entry(ce_3, ADD_CACHE_OK_TO_ADD))
return 0;
error("%s: cannot add their version to the index.", path);
ret = -1;
free_return:
free(ce_2);
free(ce_3);
return ret;
}
static void read_head_pointers(void)
{
if (read_ref("HEAD", head_sha1))
die("No HEAD -- no initial commit yet?");
if (read_ref("MERGE_HEAD", merge_head_sha1)) {
fprintf(stderr, "Not in the middle of a merge.\n");
exit(0);
}
}
static int do_unresolve(int ac, const char **av,
const char *prefix, int prefix_length)
{
int i;
int err = 0;
/* Read HEAD and MERGE_HEAD; if MERGE_HEAD does not exist, we
* are not doing a merge, so exit with success status.
*/
read_head_pointers();
for (i = 1; i < ac; i++) {
const char *arg = av[i];
const char *p = prefix_path(prefix, prefix_length, arg);
err |= unresolve_one(p);
if (p < arg || p > arg + strlen(arg))
free((char*)p);
}
return err;
}
static int do_reupdate(int ac, const char **av,
const char *prefix, int prefix_length)
{
/* Read HEAD and run update-index on paths that are
* merged and already different between index and HEAD.
*/
int pos;
int has_head = 1;
const char **pathspec = get_pathspec(prefix, av + 1);
if (read_ref("HEAD", head_sha1))
/* If there is no HEAD, that means it is an initial
* commit. Update everything in the index.
*/
has_head = 0;
redo:
for (pos = 0; pos < active_nr; pos++) {
struct cache_entry *ce = active_cache[pos];
struct cache_entry *old = NULL;
int save_nr;
if (ce_stage(ce) || !ce_path_match(ce, pathspec))
continue;
if (has_head)
old = read_one_ent(NULL, head_sha1,
ce->name, ce_namelen(ce), 0);
if (old && ce->ce_mode == old->ce_mode &&
!hashcmp(ce->sha1, old->sha1)) {
free(old);
continue; /* unchanged */
}
/* Be careful. The working tree may not have the
* path anymore, in which case, under 'allow_remove',
* or worse yet 'allow_replace', active_nr may decrease.
*/
save_nr = active_nr;
update_one(ce->name + prefix_length, prefix, prefix_length);
if (save_nr != active_nr)
goto redo;
}
return 0;
}
int cmd_update_index(int argc, const char **argv, const char *prefix)
{
int i, newfd, entries, has_errors = 0, line_termination = '\n';
int allow_options = 1;
int read_from_stdin = 0;
int prefix_length = prefix ? strlen(prefix) : 0;
char set_executable_bit = 0;
unsigned int refresh_flags = 0;
int lock_error = 0;
struct lock_file *lock_file;
git_config(git_default_config, NULL);
/* We can't free this memory, it becomes part of a linked list parsed atexit() */
lock_file = xcalloc(1, sizeof(struct lock_file));
newfd = hold_locked_index(lock_file, 0);
if (newfd < 0)
lock_error = errno;
entries = read_cache();
if (entries < 0)
die("cache corrupted");
for (i = 1 ; i < argc; i++) {
const char *path = argv[i];
const char *p;
if (allow_options && *path == '-') {
if (!strcmp(path, "--")) {
allow_options = 0;
continue;
}
if (!strcmp(path, "-q")) {
refresh_flags |= REFRESH_QUIET;
continue;
}
if (!strcmp(path, "--ignore-submodules")) {
refresh_flags |= REFRESH_IGNORE_SUBMODULES;
continue;
}
if (!strcmp(path, "--add")) {
allow_add = 1;
continue;
}
if (!strcmp(path, "--replace")) {
allow_replace = 1;
continue;
}
if (!strcmp(path, "--remove")) {
allow_remove = 1;
continue;
}
if (!strcmp(path, "--unmerged")) {
refresh_flags |= REFRESH_UNMERGED;
continue;
}
if (!strcmp(path, "--refresh")) {
setup_work_tree();
has_errors |= refresh_cache(refresh_flags);
"Assume unchanged" git This adds "assume unchanged" logic, started by this message in the list discussion recently: <Pine.LNX.4.64.0601311807470.7301@g5.osdl.org> This is a workaround for filesystems that do not have lstat() that is quick enough for the index mechanism to take advantage of. On the paths marked as "assumed to be unchanged", the user needs to explicitly use update-index to register the object name to be in the next commit. You can use two new options to update-index to set and reset the CE_VALID bit: git-update-index --assume-unchanged path... git-update-index --no-assume-unchanged path... These forms manipulate only the CE_VALID bit; it does not change the object name recorded in the index file. Nor they add a new entry to the index. When the configuration variable "core.ignorestat = true" is set, the index entries are marked with CE_VALID bit automatically after: - update-index to explicitly register the current object name to the index file. - when update-index --refresh finds the path to be up-to-date. - when tools like read-tree -u and apply --index update the working tree file and register the current object name to the index file. The flag is dropped upon read-tree that does not check out the index entry. This happens regardless of the core.ignorestat settings. Index entries marked with CE_VALID bit are assumed to be unchanged most of the time. However, there are cases that CE_VALID bit is ignored for the sake of safety and usability: - while "git-read-tree -m" or git-apply need to make sure that the paths involved in the merge do not have local modifications. This sacrifices performance for safety. - when git-checkout-index -f -q -u -a tries to see if it needs to checkout the paths. Otherwise you can never check anything out ;-). - when git-update-index --really-refresh (a new flag) tries to see if the index entry is up to date. You can start with everything marked as CE_VALID and run this once to drop CE_VALID bit for paths that are modified. Most notably, "update-index --refresh" honours CE_VALID and does not actively stat, so after you modified a file in the working tree, update-index --refresh would not notice until you tell the index about it with "git-update-index path" or "git-update-index --no-assume-unchanged path". This version is not expected to be perfect. I think diff between index and/or tree and working files may need some adjustment, and there probably needs other cases we should automatically unmark paths that are marked to be CE_VALID. But the basics seem to work, and ready to be tested by people who asked for this feature. Signed-off-by: Junio C Hamano <junkio@cox.net>
19 years ago
continue;
}
if (!strcmp(path, "--really-refresh")) {
setup_work_tree();
has_errors |= refresh_cache(REFRESH_REALLY | refresh_flags);
continue;
}
if (!strcmp(path, "--cacheinfo")) {
update-index: allow --index-info to add higher stages. The new merge world order tells the merge strategies to leave the cache unmerged and store the automerge result in the working tree if automerge is not clean. This was done for the resolve strategy and recursive strategy when no rename is involved, but recording a conflicting merge in the rename case could not easily be done by the recursive strategy. This commit adds a new input format, in addition to the exsting two, to "update-index --index-info". (1) mode SP sha1 TAB path The first format is what "git-apply --index-info" reports, and used to reconstruct a partial tree that is used for phony merge base tree when falling back on 3-way merge. (2) mode SP type SP sha1 TAB path The second format is to stuff git-ls-tree output into the index file. (3) mode SP sha1 SP stage TAB path This format is to put higher order stages into the index file and matches git-ls-files --stage output. To place a higher stage entry to the index, the path should first be removed by feeding a mode=0 entry for the path, and then feeding necessary input lines in the (3) format. For example, starting with this index: $ git ls-files -s 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 0 frotz $ git update-index --index-info ;# interactive session -- input follows... 0 0000000000000000000000000000000000000000 frotz 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 1 frotz 100755 8a1218a1024a212bb3db30becd860315f9f3ac52 2 frotz The first line of the input feeds 0 as the mode to remove the path; the SHA1 does not matter as long as it is well formatted. Then the second and third line feeds stage 1 and stage 2 entries for that path. After the above, we would end up with this: $ git ls-files -s 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 1 frotz 100755 8a1218a1024a212bb3db30becd860315f9f3ac52 2 frotz This completes the groundwork for the new merge world order. Signed-off-by: Junio C Hamano <junkio@cox.net>
19 years ago
unsigned char sha1[20];
unsigned int mode;
if (i+3 >= argc)
die("git update-index: --cacheinfo <mode> <sha1> <path>");
update-index: allow --index-info to add higher stages. The new merge world order tells the merge strategies to leave the cache unmerged and store the automerge result in the working tree if automerge is not clean. This was done for the resolve strategy and recursive strategy when no rename is involved, but recording a conflicting merge in the rename case could not easily be done by the recursive strategy. This commit adds a new input format, in addition to the exsting two, to "update-index --index-info". (1) mode SP sha1 TAB path The first format is what "git-apply --index-info" reports, and used to reconstruct a partial tree that is used for phony merge base tree when falling back on 3-way merge. (2) mode SP type SP sha1 TAB path The second format is to stuff git-ls-tree output into the index file. (3) mode SP sha1 SP stage TAB path This format is to put higher order stages into the index file and matches git-ls-files --stage output. To place a higher stage entry to the index, the path should first be removed by feeding a mode=0 entry for the path, and then feeding necessary input lines in the (3) format. For example, starting with this index: $ git ls-files -s 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 0 frotz $ git update-index --index-info ;# interactive session -- input follows... 0 0000000000000000000000000000000000000000 frotz 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 1 frotz 100755 8a1218a1024a212bb3db30becd860315f9f3ac52 2 frotz The first line of the input feeds 0 as the mode to remove the path; the SHA1 does not matter as long as it is well formatted. Then the second and third line feeds stage 1 and stage 2 entries for that path. After the above, we would end up with this: $ git ls-files -s 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 1 frotz 100755 8a1218a1024a212bb3db30becd860315f9f3ac52 2 frotz This completes the groundwork for the new merge world order. Signed-off-by: Junio C Hamano <junkio@cox.net>
19 years ago
if (strtoul_ui(argv[i+1], 8, &mode) ||
update-index: allow --index-info to add higher stages. The new merge world order tells the merge strategies to leave the cache unmerged and store the automerge result in the working tree if automerge is not clean. This was done for the resolve strategy and recursive strategy when no rename is involved, but recording a conflicting merge in the rename case could not easily be done by the recursive strategy. This commit adds a new input format, in addition to the exsting two, to "update-index --index-info". (1) mode SP sha1 TAB path The first format is what "git-apply --index-info" reports, and used to reconstruct a partial tree that is used for phony merge base tree when falling back on 3-way merge. (2) mode SP type SP sha1 TAB path The second format is to stuff git-ls-tree output into the index file. (3) mode SP sha1 SP stage TAB path This format is to put higher order stages into the index file and matches git-ls-files --stage output. To place a higher stage entry to the index, the path should first be removed by feeding a mode=0 entry for the path, and then feeding necessary input lines in the (3) format. For example, starting with this index: $ git ls-files -s 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 0 frotz $ git update-index --index-info ;# interactive session -- input follows... 0 0000000000000000000000000000000000000000 frotz 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 1 frotz 100755 8a1218a1024a212bb3db30becd860315f9f3ac52 2 frotz The first line of the input feeds 0 as the mode to remove the path; the SHA1 does not matter as long as it is well formatted. Then the second and third line feeds stage 1 and stage 2 entries for that path. After the above, we would end up with this: $ git ls-files -s 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 1 frotz 100755 8a1218a1024a212bb3db30becd860315f9f3ac52 2 frotz This completes the groundwork for the new merge world order. Signed-off-by: Junio C Hamano <junkio@cox.net>
19 years ago
get_sha1_hex(argv[i+2], sha1) ||
add_cacheinfo(mode, sha1, argv[i+3], 0))
die("git update-index: --cacheinfo"
update-index: allow --index-info to add higher stages. The new merge world order tells the merge strategies to leave the cache unmerged and store the automerge result in the working tree if automerge is not clean. This was done for the resolve strategy and recursive strategy when no rename is involved, but recording a conflicting merge in the rename case could not easily be done by the recursive strategy. This commit adds a new input format, in addition to the exsting two, to "update-index --index-info". (1) mode SP sha1 TAB path The first format is what "git-apply --index-info" reports, and used to reconstruct a partial tree that is used for phony merge base tree when falling back on 3-way merge. (2) mode SP type SP sha1 TAB path The second format is to stuff git-ls-tree output into the index file. (3) mode SP sha1 SP stage TAB path This format is to put higher order stages into the index file and matches git-ls-files --stage output. To place a higher stage entry to the index, the path should first be removed by feeding a mode=0 entry for the path, and then feeding necessary input lines in the (3) format. For example, starting with this index: $ git ls-files -s 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 0 frotz $ git update-index --index-info ;# interactive session -- input follows... 0 0000000000000000000000000000000000000000 frotz 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 1 frotz 100755 8a1218a1024a212bb3db30becd860315f9f3ac52 2 frotz The first line of the input feeds 0 as the mode to remove the path; the SHA1 does not matter as long as it is well formatted. Then the second and third line feeds stage 1 and stage 2 entries for that path. After the above, we would end up with this: $ git ls-files -s 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 1 frotz 100755 8a1218a1024a212bb3db30becd860315f9f3ac52 2 frotz This completes the groundwork for the new merge world order. Signed-off-by: Junio C Hamano <junkio@cox.net>
19 years ago
" cannot add %s", argv[i+3]);
i += 3;
continue;
}
if (!strcmp(path, "--chmod=-x") ||
!strcmp(path, "--chmod=+x")) {
if (argc <= i+1)
die("git update-index: %s <path>", path);
set_executable_bit = path[8];
continue;
}
"Assume unchanged" git This adds "assume unchanged" logic, started by this message in the list discussion recently: <Pine.LNX.4.64.0601311807470.7301@g5.osdl.org> This is a workaround for filesystems that do not have lstat() that is quick enough for the index mechanism to take advantage of. On the paths marked as "assumed to be unchanged", the user needs to explicitly use update-index to register the object name to be in the next commit. You can use two new options to update-index to set and reset the CE_VALID bit: git-update-index --assume-unchanged path... git-update-index --no-assume-unchanged path... These forms manipulate only the CE_VALID bit; it does not change the object name recorded in the index file. Nor they add a new entry to the index. When the configuration variable "core.ignorestat = true" is set, the index entries are marked with CE_VALID bit automatically after: - update-index to explicitly register the current object name to the index file. - when update-index --refresh finds the path to be up-to-date. - when tools like read-tree -u and apply --index update the working tree file and register the current object name to the index file. The flag is dropped upon read-tree that does not check out the index entry. This happens regardless of the core.ignorestat settings. Index entries marked with CE_VALID bit are assumed to be unchanged most of the time. However, there are cases that CE_VALID bit is ignored for the sake of safety and usability: - while "git-read-tree -m" or git-apply need to make sure that the paths involved in the merge do not have local modifications. This sacrifices performance for safety. - when git-checkout-index -f -q -u -a tries to see if it needs to checkout the paths. Otherwise you can never check anything out ;-). - when git-update-index --really-refresh (a new flag) tries to see if the index entry is up to date. You can start with everything marked as CE_VALID and run this once to drop CE_VALID bit for paths that are modified. Most notably, "update-index --refresh" honours CE_VALID and does not actively stat, so after you modified a file in the working tree, update-index --refresh would not notice until you tell the index about it with "git-update-index path" or "git-update-index --no-assume-unchanged path". This version is not expected to be perfect. I think diff between index and/or tree and working files may need some adjustment, and there probably needs other cases we should automatically unmark paths that are marked to be CE_VALID. But the basics seem to work, and ready to be tested by people who asked for this feature. Signed-off-by: Junio C Hamano <junkio@cox.net>
19 years ago
if (!strcmp(path, "--assume-unchanged")) {
mark_valid_only = MARK_VALID;
continue;
}
if (!strcmp(path, "--no-assume-unchanged")) {
mark_valid_only = UNMARK_VALID;
continue;
}
if (!strcmp(path, "--info-only")) {
info_only = 1;
continue;
}
if (!strcmp(path, "--force-remove")) {
force_remove = 1;
continue;
}
if (!strcmp(path, "-z")) {
line_termination = 0;
continue;
}
if (!strcmp(path, "--stdin")) {
if (i != argc - 1)
die("--stdin must be at the end");
read_from_stdin = 1;
break;
}
if (!strcmp(path, "--index-info")) {
if (i != argc - 1)
die("--index-info must be at the end");
allow_add = allow_replace = allow_remove = 1;
read_index_info(line_termination);
break;
}
if (!strcmp(path, "--unresolve")) {
has_errors = do_unresolve(argc - i, argv + i,
prefix, prefix_length);
if (has_errors)
active_cache_changed = 0;
goto finish;
}
if (!strcmp(path, "--again") || !strcmp(path, "-g")) {
setup_work_tree();
has_errors = do_reupdate(argc - i, argv + i,
prefix, prefix_length);
if (has_errors)
active_cache_changed = 0;
goto finish;
}
if (!strcmp(path, "--ignore-missing")) {
refresh_flags |= REFRESH_IGNORE_MISSING;
continue;
}
if (!strcmp(path, "--verbose")) {
verbose = 1;
continue;
}
if (!strcmp(path, "-h") || !strcmp(path, "--help"))
usage(update_index_usage);
die("unknown option %s", path);
}
setup_work_tree();
p = prefix_path(prefix, prefix_length, path);
update_one(p, NULL, 0);
if (set_executable_bit)
chmod_path(set_executable_bit, p);
if (p < path || p > path + strlen(path))
free((char*)p);
}
if (read_from_stdin) {
struct strbuf buf = STRBUF_INIT, nbuf = STRBUF_INIT;
setup_work_tree();
while (strbuf_getline(&buf, stdin, line_termination) != EOF) {
const char *p;
if (line_termination && buf.buf[0] == '"') {
strbuf_reset(&nbuf);
if (unquote_c_style(&nbuf, buf.buf, NULL))
die("line is badly quoted");
strbuf_swap(&buf, &nbuf);
}
p = prefix_path(prefix, prefix_length, buf.buf);
update_one(p, NULL, 0);
if (set_executable_bit)
chmod_path(set_executable_bit, p);
if (p < buf.buf || p > buf.buf + buf.len)
free((char *)p);
}
strbuf_release(&nbuf);
strbuf_release(&buf);
}
finish:
if (active_cache_changed) {
if (newfd < 0) {
if (refresh_flags & REFRESH_QUIET)
exit(128);
die("unable to create '%s.lock': %s",
get_index_file(), strerror(lock_error));
}
if (write_cache(newfd, active_cache, active_nr) ||
commit_locked_index(lock_file))
die("Unable to write new index file");
}
rollback_lock_file(lock_file);
return has_errors ? 1 : 0;
}