You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

215 lines
5.4 KiB

#!/bin/sh
test_description='RCS merge replacement: merge-file'
. ./test-lib.sh
cat > orig.txt << EOF
Dominus regit me,
et nihil mihi deerit.
In loco pascuae ibi me collocavit,
super aquam refectionis educavit me;
animam meam convertit,
deduxit me super semitas jusitiae,
propter nomen suum.
EOF
cat > new1.txt << EOF
Dominus regit me,
et nihil mihi deerit.
In loco pascuae ibi me collocavit,
super aquam refectionis educavit me;
animam meam convertit,
deduxit me super semitas jusitiae,
propter nomen suum.
Nam et si ambulavero in medio umbrae mortis,
non timebo mala, quoniam tu mecum es:
virga tua et baculus tuus ipsa me consolata sunt.
EOF
cat > new2.txt << EOF
Dominus regit me, et nihil mihi deerit.
In loco pascuae ibi me collocavit,
super aquam refectionis educavit me;
animam meam convertit,
deduxit me super semitas jusitiae,
propter nomen suum.
EOF
cat > new3.txt << EOF
DOMINUS regit me,
et nihil mihi deerit.
In loco pascuae ibi me collocavit,
super aquam refectionis educavit me;
animam meam convertit,
deduxit me super semitas jusitiae,
propter nomen suum.
EOF
cat > new4.txt << EOF
Dominus regit me, et nihil mihi deerit.
In loco pascuae ibi me collocavit,
super aquam refectionis educavit me;
animam meam convertit,
deduxit me super semitas jusitiae,
EOF
printf "propter nomen suum." >> new4.txt
test_expect_success 'merge with no changes' '
cp orig.txt test.txt &&
git merge-file test.txt orig.txt orig.txt &&
test_cmp test.txt orig.txt
'
cp new1.txt test.txt
test_expect_success "merge without conflict" \
"git merge-file test.txt orig.txt new2.txt"
cp new1.txt test2.txt
test_expect_success "merge without conflict (missing LF at EOF)" \
"git merge-file test2.txt orig.txt new2.txt"
test_expect_success "merge result added missing LF" \
"test_cmp test.txt test2.txt"
cp test.txt backup.txt
Sane use of test_expect_failure Originally, test_expect_failure was designed to be the opposite of test_expect_success, but this was a bad decision. Most tests run a series of commands that leads to the single command that needs to be tested, like this: test_expect_{success,failure} 'test title' ' setup1 && setup2 && setup3 && what is to be tested ' And expecting a failure exit from the whole sequence misses the point of writing tests. Your setup$N that are supposed to succeed may have failed without even reaching what you are trying to test. The only valid use of test_expect_failure is to check a trivial single command that is expected to fail, which is a minority in tests of Porcelain-ish commands. This large-ish patch rewrites all uses of test_expect_failure to use test_expect_success and rewrites the condition of what is tested, like this: test_expect_success 'test title' ' setup1 && setup2 && setup3 && ! this command should fail ' test_expect_failure is redefined to serve as a reminder that that test *should* succeed but due to a known breakage in git it currently does not pass. So if git-foo command should create a file 'bar' but you discovered a bug that it doesn't, you can write a test like this: test_expect_failure 'git-foo should create bar' ' rm -f bar && git foo && test -f bar ' This construct acts similar to test_expect_success, but instead of reporting "ok/FAIL" like test_expect_success does, the outcome is reported as "FIXED/still broken". Signed-off-by: Junio C Hamano <gitster@pobox.com>
17 years ago
test_expect_success "merge with conflicts" \
"test_must_fail git merge-file test.txt orig.txt new3.txt"
cat > expect.txt << EOF
<<<<<<< test.txt
Dominus regit me, et nihil mihi deerit.
=======
DOMINUS regit me,
et nihil mihi deerit.
>>>>>>> new3.txt
In loco pascuae ibi me collocavit,
super aquam refectionis educavit me;
animam meam convertit,
deduxit me super semitas jusitiae,
propter nomen suum.
Nam et si ambulavero in medio umbrae mortis,
non timebo mala, quoniam tu mecum es:
virga tua et baculus tuus ipsa me consolata sunt.
EOF
test_expect_success "expected conflict markers" "test_cmp test.txt expect.txt"
cp backup.txt test.txt
Sane use of test_expect_failure Originally, test_expect_failure was designed to be the opposite of test_expect_success, but this was a bad decision. Most tests run a series of commands that leads to the single command that needs to be tested, like this: test_expect_{success,failure} 'test title' ' setup1 && setup2 && setup3 && what is to be tested ' And expecting a failure exit from the whole sequence misses the point of writing tests. Your setup$N that are supposed to succeed may have failed without even reaching what you are trying to test. The only valid use of test_expect_failure is to check a trivial single command that is expected to fail, which is a minority in tests of Porcelain-ish commands. This large-ish patch rewrites all uses of test_expect_failure to use test_expect_success and rewrites the condition of what is tested, like this: test_expect_success 'test title' ' setup1 && setup2 && setup3 && ! this command should fail ' test_expect_failure is redefined to serve as a reminder that that test *should* succeed but due to a known breakage in git it currently does not pass. So if git-foo command should create a file 'bar' but you discovered a bug that it doesn't, you can write a test like this: test_expect_failure 'git-foo should create bar' ' rm -f bar && git foo && test -f bar ' This construct acts similar to test_expect_success, but instead of reporting "ok/FAIL" like test_expect_success does, the outcome is reported as "FIXED/still broken". Signed-off-by: Junio C Hamano <gitster@pobox.com>
17 years ago
test_expect_success "merge with conflicts, using -L" \
"test_must_fail git merge-file -L 1 -L 2 test.txt orig.txt new3.txt"
cat > expect.txt << EOF
<<<<<<< 1
Dominus regit me, et nihil mihi deerit.
=======
DOMINUS regit me,
et nihil mihi deerit.
>>>>>>> new3.txt
In loco pascuae ibi me collocavit,
super aquam refectionis educavit me;
animam meam convertit,
deduxit me super semitas jusitiae,
propter nomen suum.
Nam et si ambulavero in medio umbrae mortis,
non timebo mala, quoniam tu mecum es:
virga tua et baculus tuus ipsa me consolata sunt.
EOF
test_expect_success "expected conflict markers, with -L" \
"test_cmp test.txt expect.txt"
sed "s/ tu / TU /" < new1.txt > new5.txt
Sane use of test_expect_failure Originally, test_expect_failure was designed to be the opposite of test_expect_success, but this was a bad decision. Most tests run a series of commands that leads to the single command that needs to be tested, like this: test_expect_{success,failure} 'test title' ' setup1 && setup2 && setup3 && what is to be tested ' And expecting a failure exit from the whole sequence misses the point of writing tests. Your setup$N that are supposed to succeed may have failed without even reaching what you are trying to test. The only valid use of test_expect_failure is to check a trivial single command that is expected to fail, which is a minority in tests of Porcelain-ish commands. This large-ish patch rewrites all uses of test_expect_failure to use test_expect_success and rewrites the condition of what is tested, like this: test_expect_success 'test title' ' setup1 && setup2 && setup3 && ! this command should fail ' test_expect_failure is redefined to serve as a reminder that that test *should* succeed but due to a known breakage in git it currently does not pass. So if git-foo command should create a file 'bar' but you discovered a bug that it doesn't, you can write a test like this: test_expect_failure 'git-foo should create bar' ' rm -f bar && git foo && test -f bar ' This construct acts similar to test_expect_success, but instead of reporting "ok/FAIL" like test_expect_success does, the outcome is reported as "FIXED/still broken". Signed-off-by: Junio C Hamano <gitster@pobox.com>
17 years ago
test_expect_success "conflict in removed tail" \
"test_must_fail git merge-file -p orig.txt new1.txt new5.txt > out"
cat > expect << EOF
Dominus regit me,
et nihil mihi deerit.
In loco pascuae ibi me collocavit,
super aquam refectionis educavit me;
animam meam convertit,
deduxit me super semitas jusitiae,
propter nomen suum.
<<<<<<< orig.txt
=======
Nam et si ambulavero in medio umbrae mortis,
non timebo mala, quoniam TU mecum es:
virga tua et baculus tuus ipsa me consolata sunt.
>>>>>>> new5.txt
EOF
test_expect_success "expected conflict markers" "test_cmp expect out"
test_expect_success 'binary files cannot be merged' '
test_must_fail git merge-file -p \
orig.txt "$TEST_DIRECTORY"/test4012.png new1.txt 2> merge.err &&
grep "Cannot merge binary files" merge.err
'
sed -e "s/deerit.$/deerit;/" -e "s/me;$/me./" < new5.txt > new6.txt
sed -e "s/deerit.$/deerit,/" -e "s/me;$/me,/" < new5.txt > new7.txt
test_expect_success 'MERGE_ZEALOUS simplifies non-conflicts' '
test_must_fail git merge-file -p new6.txt new5.txt new7.txt > output &&
test 1 = $(grep ======= < output | wc -l)
'
sed -e 's/deerit./&%%%%/' -e "s/locavit,/locavit;/"< new6.txt | tr '%' '\012' > new8.txt
sed -e 's/deerit./&%%%%/' -e "s/locavit,/locavit --/" < new7.txt | tr '%' '\012' > new9.txt
test_expect_success 'ZEALOUS_ALNUM' '
test_must_fail git merge-file -p \
new8.txt new5.txt new9.txt > merge.out &&
test 1 = $(grep ======= < merge.out | wc -l)
'
cat >expect <<\EOF
Dominus regit me,
<<<<<<< new8.txt
et nihil mihi deerit;
In loco pascuae ibi me collocavit;
super aquam refectionis educavit me.
|||||||
et nihil mihi deerit.
In loco pascuae ibi me collocavit,
super aquam refectionis educavit me;
=======
et nihil mihi deerit,
In loco pascuae ibi me collocavit --
super aquam refectionis educavit me,
>>>>>>> new9.txt
animam meam convertit,
deduxit me super semitas jusitiae,
propter nomen suum.
Nam et si ambulavero in medio umbrae mortis,
non timebo mala, quoniam TU mecum es:
virga tua et baculus tuus ipsa me consolata sunt.
EOF
test_expect_success '"diff3 -m" style output (1)' '
test_must_fail git merge-file -p --diff3 \
new8.txt new5.txt new9.txt >actual &&
test_cmp expect actual
'
test_expect_success '"diff3 -m" style output (2)' '
git config merge.conflictstyle diff3 &&
test_must_fail git merge-file -p \
new8.txt new5.txt new9.txt >actual &&
test_cmp expect actual
'
test_done