git/Documentation/tutorial.txt

A short git tutorial
====================
v0.99.5, Aug 2005

Introduction
------------

This is trying to be a short tutorial on setting up and using a git
repository, mainly because being hands-on and using explicit examples is
often the best way of explaining what is going on.

In normal life, most people wouldn't use the "core" git programs
directly, but rather script around them to make them more palatable. 
Understanding the core git stuff may help some people get those scripts
done, though, and it may also be instructive in helping people
understand what it is that the higher-level helper scripts are actually
doing. 

The core git is often called "plumbing", with the prettier user
interfaces on top of it called "porcelain". You may not want to use the
plumbing directly very often, but it can be good to know what the
plumbing does for when the porcelain isn't flushing... 


Creating a git repository
-------------------------

Creating a new git repository couldn't be easier: all git repositories start
out empty, and the only thing you need to do is find yourself a
subdirectory that you want to use as a working tree - either an empty
one for a totally new project, or an existing working tree that you want
to import into git. 

For our first example, we're going to start a totally new repository from
scratch, with no pre-existing files, and we'll call it "git-tutorial".
To start up, create a subdirectory for it, change into that
subdirectory, and initialize the git infrastructure with "git-init-db":

	mkdir git-tutorial
	cd git-tutorial
	git-init-db 

to which git will reply

	defaulting to local storage area

which is just git's way of saying that you haven't been doing anything
strange, and that it will have created a local .git directory setup for
your new project. You will now have a ".git" directory, and you can
inspect that with "ls". For your new empty project, ls should show you
three entries, among other things:

 - a symlink called HEAD, pointing to "refs/heads/master"

   Don't worry about the fact that the file that the HEAD link points to
   doesn't even exist yet - you haven't created the commit that will
   start your HEAD development branch yet.

 - a subdirectory called "objects", which will contain all the
   objects of your project. You should never have any real reason to
   look at the objects directly, but you might want to know that these
   objects are what contains all the real _data_ in your repository.

 - a subdirectory called "refs", which contains references to objects.

   In particular, the "refs" subdirectory will contain two other
   subdirectories, named "heads" and "tags" respectively. They do
   exactly what their names imply: they contain references to any number
   of different "heads" of development (aka "branches"), and to any
   "tags" that you have created to name specific versions in your
   repository. 

   One note: the special "master" head is the default branch, which is
   why the .git/HEAD file was created as a symlink to it even if it
   doesn't yet exist. Basically, the HEAD link is supposed to always
   point to the branch you are working on right now, and you always
   start out expecting to work on the "master" branch.

   However, this is only a convention, and you can name your branches
   anything you want, and don't have to ever even _have_ a "master"
   branch. A number of the git tools will assume that .git/HEAD is
   valid, though.

   [ Implementation note: an "object" is identified by its 160-bit SHA1
   hash, aka "name", and a reference to an object is always the 40-byte
   hex representation of that SHA1 name. The files in the "refs"
   subdirectory are expected to contain these hex references (usually
   with a final '\n' at the end), and you should thus expect to see a
   number of 41-byte files containing these references in this refs
   subdirectories when you actually start populating your tree ]

You have now created your first git repository. Of course, since it's
empty, that's not very useful, so let's start populating it with data.


Populating a git repository
---------------------------

We'll keep this simple and stupid, so we'll start off with populating a
few trivial files just to get a feel for it.

Start off with just creating any random files that you want to maintain
in your git repository. We'll start off with a few bad examples, just to
get a feel for how this works:

	echo "Hello World" >hello
	echo "Silly example" >example

you have now created two files in your working tree (aka "working directory"), but to
actually check in your hard work, you will have to go through two steps:

 - fill in the "index" file (aka "cache") with the information about your
   working tree state.

 - commit that index file as an object.

The first step is trivial: when you want to tell git about any changes
to your working tree, you use the "git-update-cache" program. That
program normally just takes a list of filenames you want to update, but
to avoid trivial mistakes, it refuses to add new entries to the cache
(or remove existing ones) unless you explicitly tell it that you're
adding a new entry with the "--add" flag (or removing an entry with the
"--remove") flag. 

So to populate the index with the two files you just created, you can do

	git-update-cache --add hello example

and you have now told git to track those two files.

In fact, as you did that, if you now look into your object directory,
you'll notice that git will have added two new objects to the object
database. If you did exactly the steps above, you should now be able to do

	ls .git/objects/??/*

and see two files:

	.git/objects/55/7db03de997c86a4a028e1ebd3a1ceb225be238 
	.git/objects/f2/4c74a2e500f5ee1332c86b94199f52b1d1d962

which correspond with the objects with names of 557db... and f24c7..
respectively.

If you want to, you can use "git-cat-file" to look at those objects, but
you'll have to use the object name, not the filename of the object:

	git-cat-file -t 557db03de997c86a4a028e1ebd3a1ceb225be238

where the "-t" tells git-cat-file to tell you what the "type" of the
object is. Git will tell you that you have a "blob" object (ie just a
regular file), and you can see the contents with

	git-cat-file "blob" 557db03

which will print out "Hello World". The object 557db03 is nothing
more than the contents of your file "hello".

[ Digression: don't confuse that object with the file "hello" itself. The
  object is literally just those specific _contents_ of the file, and
  however much you later change the contents in file "hello", the object we
  just looked at will never change. Objects are immutable. ]

[ Digression #2: the second example demonstrates that you can
  abbreviate the object name to only the first several
  hexadecimal digits in most places. ]

Anyway, as we mentioned previously, you normally never actually take a
look at the objects themselves, and typing long 40-character hex
names is not something you'd normally want to do. The above digression
was just to show that "git-update-cache" did something magical, and
actually saved away the contents of your files into the git object
database.

Updating the cache did something else too: it created a ".git/index"
file. This is the index that describes your current working tree, and
something you should be very aware of. Again, you normally never worry
about the index file itself, but you should be aware of the fact that
you have not actually really "checked in" your files into git so far,
you've only _told_ git about them.

However, since git knows about them, you can now start using some of the
most basic git commands to manipulate the files or look at their status. 

In particular, let's not even check in the two files into git yet, we'll
start off by adding another line to "hello" first:

	echo "It's a new day for git" >>hello

and you can now, since you told git about the previous state of "hello", ask
git what has changed in the tree compared to your old index, using the
"git-diff-files" command:

	git-diff-files 

Oops. That wasn't very readable. It just spit out its own internal
version of a "diff", but that internal version really just tells you
that it has noticed that "hello" has been modified, and that the old object
contents it had have been replaced with something else.

To make it readable, we can tell git-diff-files to output the
differences as a patch, using the "-p" flag:

	git-diff-files -p

which will spit out

	diff --git a/hello b/hello
	--- a/hello
	+++ b/hello
	@@ -1 +1,2 @@
	 Hello World
	+It's a new day for git

ie the diff of the change we caused by adding another line to "hello".

In other words, git-diff-files always shows us the difference between
what is recorded in the index, and what is currently in the working
tree. That's very useful.

A common shorthand for "git-diff-files -p" is to just write

	git diff

which will do the same thing. 


Committing git state
--------------------

Now, we want to go to the next stage in git, which is to take the files
that git knows about in the index, and commit them as a real tree. We do
that in two phases: creating a "tree" object, and committing that "tree"
object as a "commit" object together with an explanation of what the
tree was all about, along with information of how we came to that state.

Creating a tree object is trivial, and is done with "git-write-tree". 
There are no options or other input: git-write-tree will take the
current index state, and write an object that describes that whole
index. In other words, we're now tying together all the different
filenames with their contents (and their permissions), and we're
creating the equivalent of a git "directory" object:

	git-write-tree

and this will just output the name of the resulting tree, in this case
(if you have done exactly as I've described) it should be

	8988da15d077d4829fc51d8544c097def6644dbb

which is another incomprehensible object name. Again, if you want to,
you can use "git-cat-file -t 8988d.." to see that this time the object
is not a "blob" object, but a "tree" object (you can also use
git-cat-file to actually output the raw object contents, but you'll see
mainly a binary mess, so that's less interesting).

However - normally you'd never use "git-write-tree" on its own, because
normally you always commit a tree into a commit object using the
"git-commit-tree" command. In fact, it's easier to not actually use
git-write-tree on its own at all, but to just pass its result in as an
argument to "git-commit-tree".

"git-commit-tree" normally takes several arguments - it wants to know
what the _parent_ of a commit was, but since this is the first commit
ever in this new repository, and it has no parents, we only need to pass in
the object name of the tree. However, git-commit-tree also wants to get a commit message
on its standard input, and it will write out the resulting object name for the
commit to its standard output.

And this is where we start using the .git/HEAD file. The HEAD file is
supposed to contain the reference to the top-of-tree, and since that's
exactly what git-commit-tree spits out, we can do this all with a simple
shell pipeline:

	echo "Initial commit" | git-commit-tree $(git-write-tree) > .git/HEAD

which will say:

	Committing initial tree 8988da15d077d4829fc51d8544c097def6644dbb

just to warn you about the fact that it created a totally new commit
that is not related to anything else. Normally you do this only _once_
for a project ever, and all later commits will be parented on top of an
earlier commit, and you'll never see this "Committing initial tree"
message ever again.

Again, normally you'd never actually do this by hand. There is a
helpful script called "git commit" that will do all of this for you. So
you could have just written

	git commit

instead, and it would have done the above magic scripting for you.


Making a change
---------------

Remember how we did the "git-update-cache" on file "hello" and then we
changed "hello" afterward, and could compare the new state of "hello" with the
state we saved in the index file? 

Further, remember how I said that "git-write-tree" writes the contents
of the _index_ file to the tree, and thus what we just committed was in
fact the _original_ contents of the file "hello", not the new ones. We did
that on purpose, to show the difference between the index state, and the
state in the working tree, and how they don't have to match, even
when we commit things.

As before, if we do "git-diff-files -p" in our git-tutorial project,
we'll still see the same difference we saw last time: the index file
hasn't changed by the act of committing anything. However, now that we
have committed something, we can also learn to use a new command:
"git-diff-cache".

Unlike "git-diff-files", which showed the difference between the index
file and the working tree, "git-diff-cache" shows the differences
between a committed _tree_ and either the index file or the working
tree. In other words, git-diff-cache wants a tree to be diffed
against, and before we did the commit, we couldn't do that, because we
didn't have anything to diff against. 

But now we can do 

	git-diff-cache -p HEAD

(where "-p" has the same meaning as it did in git-diff-files), and it
will show us the same difference, but for a totally different reason. 
Now we're comparing the working tree not against the index file,
but against the tree we just wrote. It just so happens that those two
are obviously the same, so we get the same result.

Again, because this is a common operation, you can also just shorthand
it with

	git diff HEAD

which ends up doing the above for you.

In other words, "git-diff-cache" normally compares a tree against the
working tree, but when given the "--cached" flag, it is told to
instead compare against just the index cache contents, and ignore the
current working tree state entirely. Since we just wrote the index
file to HEAD, doing "git-diff-cache --cached -p HEAD" should thus return
an empty set of differences, and that's exactly what it does. 

[ Digression: "git-diff-cache" really always uses the index for its
  comparisons, and saying that it compares a tree against the working
  tree is thus not strictly accurate. In particular, the list of
  files to compare (the "meta-data") _always_ comes from the index file,
  regardless of whether the --cached flag is used or not. The --cached
  flag really only determines whether the file _contents_ to be compared
  come from the working tree or not.

  This is not hard to understand, as soon as you realize that git simply
  never knows (or cares) about files that it is not told about
  explicitly. Git will never go _looking_ for files to compare, it
  expects you to tell it what the files are, and that's what the index
  is there for. ]

However, our next step is to commit the _change_ we did, and again, to
understand what's going on, keep in mind the difference between "working
tree contents", "index file" and "committed tree". We have changes
in the working tree that we want to commit, and we always have to
work through the index file, so the first thing we need to do is to
update the index cache:

	git-update-cache hello

(note how we didn't need the "--add" flag this time, since git knew
about the file already).

Note what happens to the different git-diff-xxx versions here. After
we've updated "hello" in the index, "git-diff-files -p" now shows no
differences, but "git-diff-cache -p HEAD" still _does_ show that the
current state is different from the state we committed. In fact, now
"git-diff-cache" shows the same difference whether we use the "--cached"
flag or not, since now the index is coherent with the working tree.

Now, since we've updated "hello" in the index, we can commit the new
version. We could do it by writing the tree by hand again, and
committing the tree (this time we'd have to use the "-p HEAD" flag to
tell commit that the HEAD was the _parent_ of the new commit, and that
this wasn't an initial commit any more), but you've done that once
already, so let's just use the helpful script this time:

	git commit

which starts an editor for you to write the commit message and tells you
a bit about what you have done.

Write whatever message you want, and all the lines that start with '#'
will be pruned out, and the rest will be used as the commit message for
the change. If you decide you don't want to commit anything after all at
this point (you can continue to edit things and update the cache), you
can just leave an empty message. Otherwise git-commit-script will commit
the change for you.

You've now made your first real git commit. And if you're interested in
looking at what git-commit-script really does, feel free to investigate:
it's a few very simple shell scripts to generate the helpful (?) commit
message headers, and a few one-liners that actually do the commit itself.


Checking it out
---------------

While creating changes is useful, it's even more useful if you can tell
later what changed. The most useful command for this is another of the
"diff" family, namely "git-diff-tree". 

git-diff-tree can be given two arbitrary trees, and it will tell you the
differences between them. Perhaps even more commonly, though, you can
give it just a single commit object, and it will figure out the parent
of that commit itself, and show the difference directly. Thus, to get
the same diff that we've already seen several times, we can now do

	git-diff-tree -p HEAD

(again, "-p" means to show the difference as a human-readable patch),
and it will show what the last commit (in HEAD) actually changed.

More interestingly, you can also give git-diff-tree the "-v" flag, which
tells it to also show the commit message and author and date of the
commit, and you can tell it to show a whole series of diffs.
Alternatively, you can tell it to be "silent", and not show the diffs at
all, but just show the actual commit message.

In fact, together with the "git-rev-list" program (which generates a
list of revisions), git-diff-tree ends up being a veritable fount of
changes. A trivial (but very useful) script called "git-whatchanged" is
included with git which does exactly this, and shows a log of recent
activities.

To see the whole history of our pitiful little git-tutorial project, you
can do

	git log

which shows just the log messages, or if we want to see the log together
with the associated patches use the more complex (and much more
powerful)

	git-whatchanged -p --root

and you will see exactly what has changed in the repository over its
short history. 

[ Side note: the "--root" flag is a flag to git-diff-tree to tell it to
  show the initial aka "root" commit too. Normally you'd probably not
  want to see the initial import diff, but since the tutorial project
  was started from scratch and is so small, we use it to make the result
  a bit more interesting. ]

With that, you should now be having some inkling of what git does, and
can explore on your own.

[ Side note: most likely, you are not directly using the core
  git Plumbing commands, but using Porcelain like Cogito on top
  of it. Cogito works a bit differently and you usually do not
  have to run "git-update-cache" yourself for changed files (you
  do tell underlying git about additions and removals via
  "cg-add" and "cg-rm" commands). Just before you make a commit
  with "cg-commit", Cogito figures out which files you modified,
  and runs "git-update-cache" on them for you. ]


Tagging a version
-----------------

In git, there are two kinds of tags, a "light" one, and an "annotated tag".

A "light" tag is technically nothing more than a branch, except we put
it in the ".git/refs/tags/" subdirectory instead of calling it a "head".
So the simplest form of tag involves nothing more than

	git tag my-first-tag

which just writes the current HEAD into the .git/refs/tags/my-first-tag
file, after which point you can then use this symbolic name for that
particular state. You can, for example, do

	git diff my-first-tag

to diff your current state against that tag (which at this point will
obviously be an empty diff, but if you continue to develop and commit
stuff, you can use your tag as an "anchor-point" to see what has changed
since you tagged it.

An "annotated tag" is actually a real git object, and contains not only a
pointer to the state you want to tag, but also a small tag name and
message, along with optionally a PGP signature that says that yes, you really did
that tag. You create these signed tags with either the "-a" or "-s" flag to "git tag":

	git tag -s <tagname>

which will sign the current HEAD (but you can also give it another
argument that specifies the thing to tag, ie you could have tagged the
current "mybranch" point by using "git tag <tagname> mybranch").

You normally only do signed tags for major releases or things
like that, while the light-weight tags are useful for any marking you
want to do - any time you decide that you want to remember a certain
point, just create a private tag for it, and you have a nice symbolic
name for the state at that point.


Copying repositories
--------------------

Git repositories are normally totally self-sufficient, and it's worth noting
that unlike CVS, for example, there is no separate notion of
"repository" and "working tree". A git repository normally _is_ the
working tree, with the local git information hidden in the ".git"
subdirectory. There is nothing else. What you see is what you got.

[ Side note: you can tell git to split the git internal information from
  the directory that it tracks, but we'll ignore that for now: it's not
  how normal projects work, and it's really only meant for special uses.
  So the mental model of "the git information is always tied directly to
  the working tree that it describes" may not be technically 100%
  accurate, but it's a good model for all normal use ]

This has two implications: 

 - if you grow bored with the tutorial repository you created (or you've
   made a mistake and want to start all over), you can just do simple

	rm -rf git-tutorial

   and it will be gone. There's no external repository, and there's no
   history outside the project you created.

 - if you want to move or duplicate a git repository, you can do so. There
   is "git clone" command, but if all you want to do is just to
   create a copy of your repository (with all the full history that
   went along with it), you can do so with a regular
   "cp -a git-tutorial new-git-tutorial".

   Note that when you've moved or copied a git repository, your git index
   file (which caches various information, notably some of the "stat"
   information for the files involved) will likely need to be refreshed.
   So after you do a "cp -a" to create a new copy, you'll want to do

	git-update-cache --refresh

   in the new repository to make sure that the index file is up-to-date.

Note that the second point is true even across machines. You can
duplicate a remote git repository with _any_ regular copy mechanism, be it
"scp", "rsync" or "wget". 

When copying a remote repository, you'll want to at a minimum update the
index cache when you do this, and especially with other peoples'
repositories you often want to make sure that the index cache is in some
known state (you don't know _what_ they've done and not yet checked in),
so usually you'll precede the "git-update-cache" with a

	git-read-tree --reset HEAD
	git-update-cache --refresh

which will force a total index re-build from the tree pointed to by HEAD.
It resets the index contents to HEAD, and then the git-update-cache
makes sure to match up all index entries with the checked-out files.
If the original repository had uncommitted changes in its
working tree, "git-update-cache --refresh" notices them and
tells you they need to be updated.

The above can also be written as simply

	git reset

and in fact a lot of the common git command combinations can be scripted
with the "git xyz" interfaces, and you can learn things by just looking
at what the git-*-script scripts do ("git reset" is the above two lines
implemented in "git-reset-script", but some things like "git status" and
"git commit" are slightly more complex scripts around the basic git
commands). 

Many (most?) public remote repositories will not contain any of
the checked out files or even an index file, and will _only_ contain the
actual core git files. Such a repository usually doesn't even have the
".git" subdirectory, but has all the git files directly in the
repository. 

To create your own local live copy of such a "raw" git repository, you'd
first create your own subdirectory for the project, and then copy the
raw repository contents into the ".git" directory. For example, to
create your own copy of the git repository, you'd do the following

	mkdir my-git
	cd my-git
	rsync -rL rsync://rsync.kernel.org/pub/scm/git/git.git/ .git

followed by 

	git-read-tree HEAD

to populate the index. However, now you have populated the index, and
you have all the git internal files, but you will notice that you don't
actually have any of the working tree files to work on. To get
those, you'd check them out with

	git-checkout-cache -u -a

where the "-u" flag means that you want the checkout to keep the index
up-to-date (so that you don't have to refresh it afterward), and the
"-a" flag means "check out all files" (if you have a stale copy or an
older version of a checked out tree you may also need to add the "-f"
flag first, to tell git-checkout-cache to _force_ overwriting of any old
files). 

Again, this can all be simplified with

	git clone rsync://rsync.kernel.org/pub/scm/git/git.git/ my-git
	cd my-git
	git checkout

which will end up doing all of the above for you.

You have now successfully copied somebody else's (mine) remote
repository, and checked it out. 


Creating a new branch
---------------------

Branches in git are really nothing more than pointers into the git
object database from within the ".git/refs/" subdirectory, and as we
already discussed, the HEAD branch is nothing but a symlink to one of
these object pointers. 

You can at any time create a new branch by just picking an arbitrary
point in the project history, and just writing the SHA1 name of that
object into a file under .git/refs/heads/. You can use any filename you
want (and indeed, subdirectories), but the convention is that the
"normal" branch is called "master". That's just a convention, though,
and nothing enforces it. 

To show that as an example, let's go back to the git-tutorial repository we
used earlier, and create a branch in it. You do that by simply just
saying that you want to check out a new branch:

	git checkout -b mybranch

will create a new branch based at the current HEAD position, and switch
to it. 

[ Side note: if you make the decision to start your new branch at some
  other point in the history than the current HEAD, you can do so by
  just telling "git checkout" what the base of the checkout would be. 
  In other words, if you have an earlier tag or branch, you'd just do

	git checkout -b mybranch earlier-commit

  and it would create the new branch "mybranch" at the earlier commit,
  and check out the state at that time. ]

You can always just jump back to your original "master" branch by doing

	git checkout master

(or any other branch-name, for that matter) and if you forget which
branch you happen to be on, a simple

	ls -l .git/HEAD

will tell you where it's pointing. To get the list of branches
you have, you can say

	git branch

which is nothing more than a simple script around "ls .git/refs/heads".
There will be asterisk in front of the branch you are currently on.

Sometimes you may wish to create a new branch _without_ actually
checking it out and switching to it. If so, just use the command

	git branch <branchname> [startingpoint]

which will simply _create_ the branch, but will not do anything further. 
You can then later - once you decide that you want to actually develop
on that branch - switch to that branch with a regular "git checkout"
with the branchname as the argument.


Merging two branches
--------------------

One of the ideas of having a branch is that you do some (possibly
experimental) work in it, and eventually merge it back to the main
branch. So assuming you created the above "mybranch" that started out
being the same as the original "master" branch, let's make sure we're in
that branch, and do some work there.

	git checkout mybranch
	echo "Work, work, work" >>hello
	git commit -m 'Some work.' hello

Here, we just added another line to "hello", and we used a shorthand for
both going a "git-update-cache hello" and "git commit" by just giving the
filename directly to "git commit". The '-m' flag is to give the
commit log message from the command line.

Now, to make it a bit more interesting, let's assume that somebody else
does some work in the original branch, and simulate that by going back
to the master branch, and editing the same file differently there:

	git checkout master

Here, take a moment to look at the contents of "hello", and notice how they
don't contain the work we just did in "mybranch" - because that work
hasn't happened in the "master" branch at all. Then do

	echo "Play, play, play" >>hello
	echo "Lots of fun" >>example
	git commit -m 'Some fun.' hello example

since the master branch is obviously in a much better mood.

Now, you've got two branches, and you decide that you want to merge the
work done. Before we do that, let's introduce a cool graphical tool that
helps you view what's going on:

	gitk --all

will show you graphically both of your branches (that's what the "--all"
means: normally it will just show you your current HEAD) and their
histories. You can also see exactly how they came to be from a common
source. 

Anyway, let's exit gitk (^Q or the File menu), and decide that we want
to merge the work we did on the "mybranch" branch into the "master"
branch (which is currently our HEAD too). To do that, there's a nice
script called "git resolve", which wants to know which branches you want
to resolve and what the merge is all about:

	git resolve HEAD mybranch "Merge work in mybranch"

where the third argument is going to be used as the commit message if
the merge can be resolved automatically.

Now, in this case we've intentionally created a situation where the
merge will need to be fixed up by hand, though, so git will do as much
of it as it can automatically (which in this case is just merge the "example"
file, which had no differences in the "mybranch" branch), and say:

	Simple merge failed, trying Automatic merge
	Auto-merging hello.
	merge: warning: conflicts during merge
	ERROR: Merge conflict in hello.
	fatal: merge program failed
	Automatic merge failed, fix up by hand

which is way too verbose, but it basically tells you that it failed the
really trivial merge ("Simple merge") and did an "Automatic merge"
instead, but that too failed due to conflicts in "hello".

Not to worry. It left the (trivial) conflict in "hello" in the same form you
should already be well used to if you've ever used CVS, so let's just
open "hello" in our editor (whatever that may be), and fix it up somehow.
I'd suggest just making it so that "hello" contains all four lines:

	Hello World
	It's a new day for git
	Play, play, play
	Work, work, work

and once you're happy with your manual merge, just do a

	git commit hello

which will very loudly warn you that you're now committing a merge
(which is correct, so never mind), and you can write a small merge
message about your adventures in git-merge-land. 

After you're done, start up "gitk --all" to see graphically what the
history looks like. Notice that "mybranch" still exists, and you can
switch to it, and continue to work with it if you want to. The
"mybranch" branch will not contain the merge, but next time you merge it
from the "master" branch, git will know how you merged it, so you'll not
have to do _that_ merge again.

Another useful tool, especially if you do not work in X-Window
environment all the time, is "git show-branch".

------------------------------------------------
$ git show-branch master mybranch
* [master] Merged "mybranch" changes.
 ! [mybranch] Some work.
--
+  [master] Merged "mybranch" changes.
+  [master~1] Some fun.
++ [mybranch] Some work.
------------------------------------------------

The first two lines indicate that it is showing the two branches
and the first line of the commit log message from their
top-of-the-tree commits, you are currently on "master" branch
(notice the asterisk "*" character), and the first column for
the later output lines is used to show commits contained in the
"master" branch, and the second column for the "mybranch"
branch. Three commits are shown along with their log messages.
All of them have plus '+' characters in the first column, which
means they are now part of the "master" branch. Only the "Some
work" commit has the plus '+' character in the second column,
because "mybranch" has not been merged to incorporate these
commits from the master branch.

Now, let's pretend you are the one who did all the work in
mybranch, and the fruit of your hard work has finally been merged
to the master branch. Let's go back to "mybranch", and run
resolve to get the "upstream changes" back to your branch.

	git checkout mybranch
	git resolve HEAD master "Merge upstream changes."

This outputs something like this (the actual commit object names
would be different)

	Updating from ae3a2da... to a80b4aa....
	 example |    1 +
	 hello   |    1 +
	 2 files changed, 2 insertions(+), 0 deletions(-)

Because your branch did not contain anything more than what are
already merged into the master branch, the resolve operation did
not actually do a merge. Instead, it just updated the top of
the tree of your branch to that of the "master" branch. This is
often called "fast forward" merge.

You can run "gitk --all" again to see how the commit ancestry
looks like, or run "show-branch", which tells you this.

------------------------------------------------
$ git show-branch master mybranch
! [master] Merged "mybranch" changes.
 * [mybranch] Merged "mybranch" changes.
--
++ [master] Merged "mybranch" changes.
------------------------------------------------


Merging external work
---------------------

It's usually much more common that you merge with somebody else than
merging with your own branches, so it's worth pointing out that git
makes that very easy too, and in fact, it's not that different from
doing a "git resolve". In fact, a remote merge ends up being nothing
more than "fetch the work from a remote repository into a temporary tag"
followed by a "git resolve". 

It's such a common thing to do that it's called "git pull", and you can
simply do

	git pull <remote-repository>

and optionally give a branch-name for the remote end as a second
argument.

The "remote" repository can even be on the same machine. One of
the following notations can be used to name the repository to
pull from:

	Rsync URL
		rsync://remote.machine/path/to/repo.git/

	HTTP(s) URL
		http://remote.machine/path/to/repo.git/

	GIT URL
		git://remote.machine/path/to/repo.git/

	SSH URL
		remote.machine:/path/to/repo.git/

	Local directory
		/path/to/repo.git/

[ Digression: you could do without using any branches at all, by
  keeping as many local repositories as you would like to have
  branches, and merging between them with "git pull", just like
  you merge between branches. The advantage of this approach is
  that it lets you keep set of files for each "branch" checked
  out and you may find it easier to switch back and forth if you
  juggle multiple lines of development simultaneously. Of
  course, you will pay the price of more disk usage to hold
  multiple working trees, but disk space is cheap these days. ]

[ Digression #2: you could even pull from your own repository by
  giving '.' as <remote-repository> parameter to "git pull". ]

It is likely that you will be pulling from the same remote
repository from time to time. As a short hand, you can store
the remote repository URL in a file under .git/remotes/
directory, like this:

------------------------------------------------
mkdir -p .git/remotes/
cat >.git/remotes/linus <<\EOF
URL: http://www.kernel.org/pub/scm/git/git.git/
EOF
------------------------------------------------

and use the filename to "git pull" instead of the full URL.
The URL specified in such file can even be a prefix
of a full URL, like this:

------------------------------------------------
cat >.git/remotes/jgarzik <<\EOF
URL: http://www.kernel.org/pub/scm/linux/git/jgarzik/
EOF
------------------------------------------------


Examples.

	(1) git pull linus
	(2) git pull linus tag v0.99.1
	(3) git pull jgarzik/netdev-2.6.git/ e100

the above are equivalent to:

	(1) git pull http://www.kernel.org/pub/scm/git/git.git/ HEAD
	(2) git pull http://www.kernel.org/pub/scm/git/git.git/ tag v0.99.1
	(3) git pull http://www.kernel.org/pub/.../jgarzik/netdev-2.6.git e100


Publishing your work
--------------------

So we can use somebody else's work from a remote repository; but
how can _you_ prepare a repository to let other people pull from
it?

Your do your real work in your working tree that has your
primary repository hanging under it as its ".git" subdirectory.
You _could_ make that repository accessible remotely and ask
people to pull from it, but in practice that is not the way
things are usually done. A recommended way is to have a public
repository, make it reachable by other people, and when the
changes you made in your primary working tree are in good shape,
update the public repository from it. This is often called
"pushing".

[ Side note: this public repository could further be mirrored,
  and that is how kernel.org git repositories are done. ]

Publishing the changes from your local (private) repository to
your remote (public) repository requires a write privilege on
the remote machine. You need to have an SSH account there to
run a single command, "git-receive-pack".

First, you need to create an empty repository on the remote
machine that will house your public repository. This empty
repository will be populated and be kept up-to-date by pushing
into it later. Obviously, this repository creation needs to be
done only once.

[ Digression: "git push" uses a pair of programs,
  "git-send-pack" on your local machine, and "git-receive-pack"
  on the remote machine. The communication between the two over
  the network internally uses an SSH connection. ]

Your private repository's GIT directory is usually .git, but
your public repository is often named after the project name,
i.e. "<project>.git". Let's create such a public repository for
project "my-git". After logging into the remote machine, create
an empty directory:

	mkdir my-git.git

Then, make that directory into a GIT repository by running
git-init-db, but this time, since its name is not the usual
".git", we do things slightly differently:

	GIT_DIR=my-git.git git-init-db

Make sure this directory is available for others you want your
changes to be pulled by via the transport of your choice. Also
you need to make sure that you have the "git-receive-pack"
program on the $PATH.

[ Side note: many installations of sshd do not invoke your shell
  as the login shell when you directly run programs; what this
  means is that if your login shell is bash, only .bashrc is
  read and not .bash_profile. As a workaround, make sure
  .bashrc sets up $PATH so that you can run 'git-receive-pack'
  program. ]

Your "public repository" is now ready to accept your changes.
Come back to the machine you have your private repository. From
there, run this command:

	git push <public-host>:/path/to/my-git.git master

This synchronizes your public repository to match the named
branch head (i.e. "master" in this case) and objects reachable
from them in your current repository.

As a real example, this is how I update my public git
repository. Kernel.org mirror network takes care of the
propagation to other publicly visible machines:

	git push master.kernel.org:/pub/scm/git/git.git/ 


Packing your repository
-----------------------

Earlier, we saw that one file under .git/objects/??/ directory
is stored for each git object you create. This representation
is convenient and efficient to create atomically and safely, but
not so convenient to transport over the network. Since git objects are
immutable once they are created, there is a way to optimize the
storage by "packing them together". The command

	git repack

will do it for you. If you followed the tutorial examples, you
would have accumulated about 17 objects in .git/objects/??/
directories by now. "git repack" tells you how many objects it
packed, and stores the packed file in .git/objects/pack
directory.

[ Side Note: you will see two files, pack-*.pack and pack-*.idx,
  in .git/objects/pack directory. They are closely related to
  each other, and if you ever copy them by hand to a different
  repository for whatever reason, you should make sure you copy
  them together. The former holds all the data from the objects
  in the pack, and the latter holds the index for random
  access. ]

If you are paranoid, running "git-verify-pack" command would
detect if you have a corrupt pack, but do not worry too much.
Our programs are always perfect ;-).

Once you have packed objects, you do not need to leave the
unpacked objects that are contained in the pack file anymore.

	git prune-packed

would remove them for you.

You can try running "find .git/objects -type f" before and after
you run "git prune-packed" if you are curious.

[ Side Note: "git pull" is slightly cumbersome for HTTP transport,
  as a packed repository may contain relatively few objects in a
  relatively large pack. If you expect many HTTP pulls from your
  public repository you might want to repack & prune often, or
  never. ]

If you run "git repack" again at this point, it will say
"Nothing to pack". Once you continue your development and
accumulate the changes, running "git repack" again will create a
new pack, that contains objects created since you packed your
repository the last time. We recommend that you pack your project
soon after the initial import (unless you are starting your
project from scratch), and then run "git repack" every once in a
while, depending on how active your project is.

When a repository is synchronized via "git push" and "git pull",
objects packed in the source repository are usually stored
unpacked in the destination, unless rsync transport is used.


Working with Others
-------------------

Although git is a truly distributed system, it is often
convenient to organize your project with an informal hierarchy
of developers. Linux kernel development is run this way. There
is a nice illustration (page 17, "Merges to Mainline") in Randy
Dunlap's presentation (http://tinyurl.com/a2jdg).

It should be stressed that this hierarchy is purely "informal".
There is nothing fundamental in git that enforces the "chain of
patch flow" this hierarchy implies. You do not have to pull
from only one remote repository.


A recommended workflow for a "project lead" goes like this:

 (1) Prepare your primary repository on your local machine. Your
     work is done there.

 (2) Prepare a public repository accessible to others.

 (3) Push into the public repository from your primary
     repository.

 (4) "git repack" the public repository. This establishes a big
     pack that contains the initial set of objects as the
     baseline, and possibly "git prune-packed" if the transport
     used for pulling from your repository supports packed
     repositories.

 (5) Keep working in your primary repository. Your changes
     include modifications of your own, patches you receive via
     e-mails, and merges resulting from pulling the "public"
     repositories of your "subsystem maintainers".

     You can repack this private repository whenever you feel
     like.

 (6) Push your changes to the public repository, and announce it
     to the public.

 (7) Every once in a while, "git repack" the public repository.
     Go back to step (5) and continue working.


A recommended work cycle for a "subsystem maintainer" who works
on that project and has an own "public repository" goes like this:

 (1) Prepare your work repository, by "git clone" the public
     repository of the "project lead". The URL used for the
     initial cloning is stored in .git/branches/origin.

 (2) Prepare a public repository accessible to others.

 (3) Copy over the packed files from "project lead" public
     repository to your public repository by hand; preferrably
     use rsync for that task.

 (4) Push into the public repository from your primary
     repository. Run "git repack", and possibly "git
     prune-packed" if the transport used for pulling from your
     repository supports packed repositories.

 (5) Keep working in your primary repository. Your changes
     include modifications of your own, patches you receive via
     e-mails, and merges resulting from pulling the "public"
     repositories of your "project lead" and possibly your
     "sub-subsystem maintainers".

     You can repack this private repository whenever you feel
     like.

 (6) Push your changes to your public repository, and ask your
     "project lead" and possibly your "sub-subsystem
     maintainers" to pull from it.

 (7) Every once in a while, "git repack" the public repository.
     Go back to step (5) and continue working.


A recommended work cycle for an "individual developer" who does
not have a "public" repository is somewhat different. It goes
like this:

 (1) Prepare your work repository, by "git clone" the public
     repository of the "project lead" (or a "subsystem
     maintainer", if you work on a subsystem). The URL used for
     the initial cloning is stored in .git/branches/origin.

 (2) Do your work there. Make commits.

 (3) Run "git fetch origin" from the public repository of your
     upstream every once in a while. This does only the first
     half of "git pull" but does not merge. The head of the
     public repository is stored in .git/refs/heads/origin.

 (4) Use "git cherry origin" to see which ones of your patches
     were accepted, and/or use "git rebase origin" to port your
     unmerged changes forward to the updated upstream.

 (5) Use "git format-patch origin" to prepare patches for e-mail
     submission to your upstream and send it out. Go back to
     step (2) and continue.


Working with Others, Shared Repository Style
--------------------------------------------

If you are coming from CVS background, the style of cooperation
suggested in the previous section may be new to you. You do not
have to worry. git supports "shared public repository" style of
cooperation you are probably more familiar with as well.

For this, set up a public repository on a machine that is
reachable via SSH by people with "commit privileges".  Put the
committers in the same user group and make the repository
writable by that group.

Each committer would then:

	- clone the shared repository to a local repository,

------------------------------------------------
$ git clone repo.shared.xz:/pub/scm/project.git/ my-project
$ cd my-project
$ hack away
------------------------------------------------

	- merge the work others might have done while you were
          hacking away.

------------------------------------------------
$ git pull origin
$ test the merge result
------------------------------------------------

	- push your work as the new head of the shared
          repository.

------------------------------------------------
$ git push origin master
------------------------------------------------

If somebody else pushed into the same shared repository while
you were working locally, the last step "git push" would
complain, telling you that the remote "master" head does not
fast forward.  You need to pull and merge those other changes
back before you push your work when it happens.


[ to be continued.. cvsimports ]