Many places in dtc use strdup(), but none of them actually check the
return value to see if the implied allocation succeeded. This is a
potential bug, which we fix in the patch below by replacing strdup()
with an xstrdup() which in analogy to xmalloc() will quit with a fatal
error if the allocation fails.
I felt the introduciton of util.[ch] was a better choice
for utility oriented code than directly using srcpos.c
for the new string function.
This patch is a re-factoring of Dave Gibson's similar patch.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Currently both libfdt and dtc define a set of endian conversion macros
for accessing the device tree blob which is always big-endian. libfdt
uses names like cpu_to_fdt32() and dtc uses names like cpu_to_be32 (as
the Linux kernel). This patch switches dtc over to using the libfdt
macros (including libfdt_env.h to supply them). This has a couple of
small advantages:
- Removes some code duplication
- Will make conversion a bit easier if we ever need to produce
little-endian device tree blobs.
- dtc no longer needs to pull in netinet/in.h simply for the
ntohs() and ntohl() functions
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently, dtc defines Linux-like names for various fixed-size integer
types. There's no good reason to do this; even Linux itself doesn't
use these names for externally visible things any more. This patch
replaces these with the C99 standardized type names from stdint.h.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently, dtc will put the nonsense value 0xfeedbeef into the
boot_cpuid_phys field of an output blob, unless explicitly given
another value with the -b command line option. As well as being a
totally unuseful default value, this also means that dtc won't
properly preserve the boot_cpuid_phys field in -I dtb -O dtb mode.
This patch reworks things to improve the boot_cpuid handling. The new
semantics are that the output's boot_cpuid_phys value is:
the value given on the command line if -b is used
otherwise
the value from the input, if in -I dtb mode
otherwise
0
Implementation-wise we do the following:
- boot_cpuid_phys is added to struct boot_info, so that
structure now contains all of the blob's semantic information.
- dt_to_blob() and dt_to_asm() output the cpuid given in
boot_info
- dt_from_blob() fills in boot_info based on the input blob
- The other dt_from_*() functions just record 0, but we can
change this easily if e.g. we invent a way of specifying the boot cpu
in the source format.
- main() overrides the cpuid in the boot_info between input
and output if -b is given
We add some testcases to check this new behaviour.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently, main() has a variable for the input file. It used to be
that main() would open the input based on command line arguments
before passing it to the dt_from_*() function. However, only
dt_from_blob() uses this. dt_from_source() opens its own file, and
dt_from_fs() interprets the argument as as a directory and does its
own opendir() call.
Furthermore, main() opened the file with dtc_open_file() but closed it
with a direct call to fclose().
Therefore, to improve the interface consistency between the
dt_from_*() functions, make dt_from_blob() open and close its own
files like the other dt_from_*() functions.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently, main() tests if it got a valid input tree from whichever
dt_from_*() function it invoked and if not, die()s. For one thing,
this test has, for no good reason, three different ways for those
functions to communicate a failure to provide input (bi NULL, bi->dt
NULL, or bi->error non-zero). For another, in every case save one, if
the dt_from_*() functions are unable to provide input they will
immediately die() (with a more specific error message) rather than
proceeding to the test in main().
Therefore, this patch removes this test, making the one case that
could have triggered it (in dt_from_source()) call die() directly
instead. With this change, the error field in struct boot_info is now
unused, so remove it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The asize field in struct data is a hangover from the early days when
a struct data was sometimes allowed to refer to a static chunk of
memory rather than a malloc()ed block.
That's long gone, since the lifetime issues were far more trouble than
it was worth, so get rid of the asize field.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
At present -I dts and -I fs modes both use the fill_fullpaths() helper
function to fill in the fullpath and basenamelen fields of struct
node, which are useful in later parts of the code. -I dtb mode,
however, fills these in itself.
This patch simplifies flattree.c by making -I dtb mode use
fill_fullpaths() like the others.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Previously, only failure to parse caused the reading of the tree to fail;
semantic errors that called yyerror() but not YYERROR only emitted a message,
without signalling make to stop the build.
Signed-off-by: Scott Wood <scottwood@freescale.com>
The remaining old-style tree checking code: check_root(), check_cpus()
and check_memory() really aren't that useful. They mostly check for
the presence of particular nodes and properties. That's inherently
prone to false-positives, because we could be dealing with an
artificial tree (like many of the testcases) or it could be expected
that the missing properties are filled in by a bootloader or other
agent.
If any of these checks really turns out to be useful, we can
reimplement them later in a better conceived way on top of the new
checking infrastructure. For now, just get rid of them, removing the
last vestiges of the old-style checking code (hoorah).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch extends dtc syntax to allow references (&label, or
&{/full/path}) directly within property definitions, rather than
inside a cell list. Such references are expanded to the full path of
the referenced node, as a string, instead of to a phandle as
references within cell lists are evaluated.
A testcase is also included.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This adds 'const' qualifiers to many variables and functions. In
particular it's now used for passing names to the tree accesor
functions.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
My rework of the tree checking code introduced a potentially nasty bug
- it uses the structure_ok variable uninitialized. This patch fixes
the problem. It's a fairly ugly bandaid approach, but the ugly will
disappear once future patches have folded the semantic checks into the
new framework.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There are times when we need extra space in the blob and just want
to have it added on w/o know the exact size to make it.
The padding and min size options are mutually exclusive.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Currently, every 'data' object, used to represent property values, has
two lists of fixup structures - one for labels and one for references.
Sometimes we want to look at them separately, but other times we need
to consider both types of fixup.
I'm planning to implement string references, where a full path rather
than a phandle is substituted into a property value. Adding yet
another list of fixups for that would start to get silly. So, this
patch merges the "refs" and "labels" lists into a single list of
"markers", each of which has a type field indicating if it represents
a label or a phandle reference. String references or any other new
type of in-data marker will then just need a new type value - merging
data blocks and other common manipulations will just work.
While I was at it I made some cleanups to the handling of fixups which
simplify things further.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
dtc: Flexible tree checking infrastructure
Here, at last, is a substantial start on revising dtc's infrastructure
for checking the tree; this is the rework I've been saying was
necessary practically since dtc was first release.
In the new model, we have a table of "check" structures, each with a
name, references to checking functions, and status variables. Each
check can (in principle) be individually switched off or on (as either
a warning or error). Checks have a list of prerequisites, so if
checks need to rely on results from earlier checks to make sense (or
even to avoid crashing) they just need to list the relevant other
checks there.
For now, only the "structural" checks and the fixups for phandle
references are converted to the new mechanism. The rather more
involved semantic checks (which is where this new mechanism will
really be useful) will have to be converted in future patches.
At present, there's no user interface for turning on/off the checks -
the -f option now forces output even if "error" level checks fail.
Again, future patches will be needed to add the fine-grained control,
but that should be quite straightforward with the infrastructure
implemented here.
Also adds a testcase for the handling of bad references, which catches
a bug encountered while developing this patch.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch moves the dtc code for checking the device tree its
processing into a new checks.c. The tree accessor functions from
livetree.c which the checks use are exported and added to dtc.h.
Another small step towards a flexible checking architecture.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Previously, there were a few shift/reduce and reduce/reduce
errors in the grammar that were being handled by the not-so-popular
GLR Parser technique.
Flip a right-recursive stack-abusing rule into a left-recursive
stack-friendly rule and clear up three messes in one shot: No more
conflicts, no need for the GLR parser, and friendlier stackness.
Compensate by reversing the property list on the node.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
At present, dtc makes a lot of semantic checks on the device tree by
default, and will refuse to produce output if they fail. This means
people tend to need -f to force output despite failing semantic checks
rather a lot.
This patch splits the device tree checks into structural checks (no
bad or duplicate names or phandles) and semantic checks (everything
else). By default, only the structural checks are performed, and are
fatal. -f will force output even with structural errors (using this
in -Idts mode would essentially always be a bad idea, but it might be
useful in -Idtb mode for examining a malformed dtb).
Semantic checks are only performed if the new -c command line option
is supplied, and are always warnings only. Semantic checks will never
be performed on a tree with structural errors.
This patch is only a stopgap before implementing proper fine-grained
error/warning handling, but it should at least get rid of the
far-too-frequent need for -f for the time being.
This patch removes the -f from the dtc testcases now that it's no
longer necessary.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In the dtc tree, both flat_dt.h and libfdt/fdt.h have structures and
constants relating to the flattened device tree format derived from
asm-powerpc/prom.h in the kernel. The former is used in dtc, the
latter in libfdt.
libfdt/fdt.h is the more recent, revised version, so use that
throughout, removing flat_dt.h.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This large patch removes all trailing whitespace from dtc (including
libfdt, the testsuite and documentation). It also removes a handful
of redundant blank lines (at the end of functions, or when there are
two blank lines together for no particular reason).
As well as anything else, this means that quilt won't whinge when I go
to convert the whole of libfdt into a patch to apply to the kernel.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch turns on optimisation in the Makefile by default. With the
optimizer on, some uninitialized variable warnings (one real, two
bogus) are now generated. This patch also squashes those again.
Extend the parser grammer to allow labels before or after any
property data (string, cell list, or byte list), and any
byte or cell within the property data.
Store the labels using the same linked list structure as node
references, but using a parallel list.
When writing assembly output emit global labels as offsets from
the start of the definition of the data.
Note that the alignment for a cell list is done as part of the
opening < delimiter, not the = or , before it. To label a cell
after a string or byte list put the label inside the cell list.
For example,
prop = zero: [ aa bb ], two: < four: 1234 > eight: ;
will produce labels with offsets 0, 2, 4, and 8 bytes from
the beginning of the data for property prop.
Signed-off-by: Milton Miller <miltonm@bga.com>
Implement the -R <number> option to add memory reserve slots.
Add a -S <size> option makes the blob at least this number of bytes.
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
Keeps track of open files in a stack, and assigns
a filenum to source positions for each lexical token.
Modified error reporting to show source file as well.
No policy on file directory basis has been decided.
Still handles stdin.
Tested on all arch/powerpc/boot/dts DTS files
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Add -h option for help
Add -q quiet option to reduce or suppress the whining
Create #define for the default version value.
Signed-off-by: vanbaren@cideas.com <vanbaren@cideas.com>
New syntax d#, b#, o# and h# allow for an explicit prefix
on cell values to specify their base. Eg: <d# 123>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
At present each property definition in a dts file must give as the
value either a string ("abc..."), a bytestring ([12abcd...]) or a cell
list (<1 2 3 ...>). This patch allows a property value to be given as
several of these, comma-separated. The final property value is just
the components appended together. So a property could have a list of
cells followed by a string, or a bytestring followed by some cells.
Cells are always aligned, so if cells are given following a string or
bytestring which is not a multiple of 4 bytes long, zero bytes are
inserted to align the following cells.
The primary motivation for this feature, however, is to allow defining
a property as a list of several strings. This is what's needed for
defining OF 'compatible' properties, and is less ugly and fiddly than
using embedded \0s in the strings.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
dtc always sets the physical boot CPU to 0xfeedbeef. Add a -b option to
set this. Also add warnings when using the wrong property with the
wrong blob version.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Jon Loeliger