Since -D sets preprocessor directives, it applies for the preprocessor not
just the C compiler proper and so belongs in CPPFLAGS rather than CFLAGS.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When Valgrind is not available NO_VALGRIND is set in CFLAGS, and this
is needed during dependency generation as well as compilation.
Message-Id: <20191210163033.9888-1-emaste@freefall.freebsd.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Travis recently added the possibility to compile on aarch64, ppc64le
and s390x hosts, so let's add this possibility to the dtc CI, too.
Unfortunately, there are some weird valgrind errors when running
on ppc64le (which rather look like a problem on the valgrind side to
me, and not in dtc), so we can not use "checkm" on ppc64le yet.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191203122020.14442-1-thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Right now this is just a build test for FreeBSD, along with a Linux build
and "make check." A later change will add "gmake check" for FreeBSD.
Signed-off-by: Ed Maste <emaste@freebsd.org>
Message-Id: <20191120211133.69281-1-emaste@freefall.freebsd.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Clang does not support gnu_printf, so just use printf when using it to
compile.
Signed-off-by: Ed Maste <emaste@freebsd.org>
Message-Id: <20191120210422.61327-1-emaste@freefall.freebsd.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
By default FreeBSD does not have 'gcc' in the PATH (on common platforms).
As on Linux 'cc' is available as a link to the default compiler (Clang or
GCC), so just use 'cc'.
Signed-off-by: Ed Maste <emaste@freebsd.org>
Message-Id: <20191115155108.39488-1-emaste@freefall.freebsd.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If there is trailing zero, fdtget adds extra chacarter to the
property value. Thus comparing the expected with the actual
value, an error is emitted.
Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
Message-Id: <20191111080444.9819-3-stefan@olimex.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The overlay path ends with trailing zero. When adding this path
as property value, this character should be removed. This is the case
when the overlay adds a node with an alias.
Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
Message-Id: <20191111080444.9819-2-stefan@olimex.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Python recently deprecated some test methods in favour of others. Adjust
the code to avoid warnings.
Signed-off-by: Simon Glass <sjg@chromium.org>
Message-Id: <20191113012410.62550-1-sjg@chromium.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
BSD sed requires that an extension is provided to the -i (in-place edit)
flag, which may immediately follow the -i or may be separated by a space -
sed -i .bak and sed -i.bak are equivalent. The extension is optional with
GNU sed, but if provided must immediately follow the -i. Thus, sed -i.bak
behaves identically with both GNU and BSD sed.
Signed-off-by: Ed Maste <emaste@freebsd.org>
Message-Id: <20191114203615.2866-1-emaste@freefall.freebsd.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This function returns an int32_t, however the prototype in
libfdt_internal.h shows it returning an int. We haven't caught this before
because they're the same type on nearly all platforms this gets built on.
Apparently it's not the case on FreeRTOS, so someone hit this mismatch
building for that platform.
Reported-by: dharani kumar <dharanikumarsrvn@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The type here is uint32_t which should use PRIx32, not plain %x which is
for an int, we've just gotten away with it so far.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Use -b to explicitly set file prefix, so that byacc generates files with
the same names as bison.
Add %locations to dtc-parser.y to explicitly enable location tracking
for byacc, and define YYERROR_CALL to prevent byacc from defining it to
call yyerror with 2 parameters because of the locations directive,
because dtc-parser.y defines yyerror to accept one parameter.
Signed-off-by: Ethan Sommer <e5ten.arch@gmail.com>
Message-Id: <20191029162619.32561-1-e5ten.arch@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This function should use a void * type, not char *. This causes an error:
TypeError: in method 'fdt_property_stub', argument 3 of type 'char const *'
Fix it and update the tests.
Signed-off-by: Simon Glass <sjg@chromium.org>
Message-Id: <20191025010226.34378-1-sjg@chromium.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
dtc uses non-portable formats. Using gnu_printf attributes (for
warnings) in combination with __USE_MINGW_ANSI_STDIO allows to build
for win32.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20191009102025.10179-8-marcandre.lureau@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Fixes mingw cross-compilation. lstat() doesn't exist on win32.
It seems to me that stat() is the right function there, to return
informations about the file it refers to.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20191009102025.10179-7-marcandre.lureau@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Instead of outputing files to current directory, allow to specificy an
output directory. This helps with meson build system out-of-tree support.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20191009102025.10179-4-marcandre.lureau@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
At present the tool terminates its execution if one of the overlays passed
as command-line arguments can't be successfully read or applied, but the exit
code of the process is zero, making failures hard to detect inside scripts.
Signed-off-by: Valter Minute <valter.minute@toradex.com>
Message-Id: <20191009123256.14248-1-valter.minute@toradex.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Set code style for various editors.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20191009102025.10179-2-marcandre.lureau@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The dts syntax allows for '<>' around phandles and arg cells or not
which it didn't matter until adding type information. However, the YAML
encoding expects each phandle + args to be bracketed.
If TYPE_UINT32 markers are not present before each REF_PHANDLE, fix up
the markers and add the TYPE_UINT32 markers. This allows the subsequent
YAML emitting code to work as-is.
Adding the markers at an earlier stage doesn't work because of
possible labels in dts output. We'd have to define the ordering of
labels and brackets. Also, it is probably best to have dts output match
the input.
Signed-off-by: Rob Herring <robh@kernel.org>
Message-Id: <20190918183534.24205-1-robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Including libfdt.h in a C++ project fails during compilation with recent
version of GCC or Clang.
This simple example:
extern "C" {
#include <libfdt.h>
}
int main(void) { return 0; }
leads to the following errors with GCC 9.1.0:
/usr/include/libfdt.h: In function ‘void fdt32_st(void*, uint32_t)’:
/usr/include/libfdt.h:139:16: error: invalid conversion from ‘void*’ to ‘uint8_t*’ {aka ‘unsigned char*’} [-fpermissive]
139 | uint8_t *bp = property;
| ^~~~~~~~
| |
| void*
/usr/include/libfdt.h: In function ‘void fdt64_st(void*, uint64_t)’:
/usr/include/libfdt.h:163:16: error: invalid conversion from ‘void*’ to ‘uint8_t*’ {aka ‘unsigned char*’} [-fpermissive]
163 | uint8_t *bp = property;
| ^~~~~~~~
| |
| void*
This commit adds an explicit cast to uint8_t* to fix this issue.
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Message-Id: <20190910104824.1321594-1-luc.michel@greensocs.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The default Python version for pylibfdt is already Python 3 but if
called without specifiying an interpreter, the setup.py script gets
called with Python 2.
It's of course still possible to call setup.py with python2 directly.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Message-Id: <20190907152530.25102-1-luca@z3ntu.xyz>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The 'alias_paths' check verifies that each property in /aliases is a valid
path to another node. However this can cans false positives trees where
the /aliases node has a phandle property, which isn't in this format but
is allowed. In particular this situation can be common with trees dumped
from some real OF systems (which typically generate a phandle for every
node).
Special case this to avoid the spurious error.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Convert the usage to be compatible with Python 3 and the current API.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Message-Id: <20190817212532.15661-2-luca@z3ntu.xyz>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The "strlen && strprefixeq" check in get_node_by_path is
excessive, since strlen is checked in strprefixeq macro
internally. Thus, "strlen(child->name) == p-path"
conjunct duplicates after macro expansion and could
be removed.
Signed-off-by: Denis Efremov <efremov@linux.com>
Message-Id: <20190827204148.20604-1-efremov@linux.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
c12b2b0c20 "libfdt: fdt_address_cells() and fdt_size_cells()" introduced
a bug as it consolidated code between the helpers for getting
#address-cells and #size-cells. Specifically #size-cells is allowed to
be 0, and is frequently found so in practice for /cpus. IEEE1275 only
requires implementations to handle 1..4 for #address-cells, although one
could make a case for #address-cells == #size-cells == 0 being used to
represent a bridge with a single port.
While we're there, it's not totally obvious that the existing implicit
cast of a u32 to int will give the correct results according to strict C,
although it does work in practice. Straighten that up to cast only after
we've made our range checks.
Reported-by: yonghuhaige via https://github.com/dgibson/dtc/issues/28
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Distributions packaging dtc may need to set extra flags. Currently when
they do that it overrides the ones set by the makefile. This is
particularly problematic when compiling without yaml, as the yaml
detection is ignored.
ld: dtc.o: in function `main':
dtc.c:(.text.startup+0x718): undefined reference to `dt_to_yaml'
This patch provides a EXTRA_CFLAGS variable that is added to the list of
CFLAGS, and can be set on the command line when packaging.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20190722030244.9580-1-joel@jms.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In libfdt we often sanity test fdt_totalsize(fdt) fairly early, then
trust it (but *only* that header field) for the remainder of our work.
However, Coverity gets confused by this - it sees the byteswap in
fdt32_ld() and assumes that means it is coming from an untrusted source
everytime, resulting in many tainted data warnings.
Most of these end up with logic in fdt_get_string() as the unsafe
destination for this tainted data, so let's tweak the logic there to make
it clearer to Coverity that this is ok.
We add a sanity test on fdt_totalsize() to fdt_probe_ro_(). Because the
interface allows bare ints to be used for offsets, we already have the
assumption that totalsize must be 31-bits or less (2GiB would be a
ludicrously large fdt). This makes this more explicit.
We also make fdt_probe_ro() return the size for convenience, and change the
logic in fdt_get_string() to keep it in a local so that Coverity can see
that it has already been bounds-checked.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Symbols from overlays are merged into the target tree, and are required to
have the form:
/fragment@XXX/__overlay__/...
If any symbols don't have this form, the overlay is rejected.
But there's not really anything wrong with an overlay having "local"
labels referring to a fragment node or some other metadata, that's not
expected to end up in a target tree.
So change our overlay application to simply ignore such symbols rather than
fail.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When applying overlays, we merge symbols from the overlay into the target
tree. At the moment the logic for this assumes all symbols in the overlay
are attached to a node of the form:
/fragment@XXX/__overlay__/relative/path
And will end up applied to the relative/path node under the fragment's
target.
However, this disallows the case of a symbol in the form just:
/fragment@XXX/__overlay__
This does have a pretty obvious sensible meaning: attach the new symbol
directly to the fragment's target, but we don't currently do that.
It's pretty easy to workaround this limitation in one's overlays, but it's
also easy to handle in the overlay applying code, so we might as well
extend it to cover this case.
Reported-by: Christophe Braillon
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add this into the class to simplify use of this function.
Signed-off-by: Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com>
Message-Id: <1562130487-27028-1-git-send-email-appana.durga.rao@xilinx.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
At present this example is incorrect since it is missing the call to
finish_reservemap() and does not add a root node. Fix these problems.
Signed-off-by: Simon Glass <sjg@chromium.org>
Message-Id: <20190703000815.102459-1-sjg@chromium.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This adds a test case to demonstrate some issue seen when applying
overlays using 'fdtoverlay'. It fails with FDT_ERR_NOSPACE:
- with long target path
- symbols in order to use these nodes in possible subsequent overlay.
This is seen with this patch, by running:
$ make check # Reports a failed test
$ ./fdtoverlay -i tests/overlay_base.test.dtb -o out.dtb \
tests/overlay_overlay_long_path.fdoverlay.test.dtb
Failed to apply tests/overlay_overlay_long_path.fdoverlay.test.dtb (-3)
This overlay fails to apply, because dtb size is close to modulo 1024
bytes chunk: utilfdt_read() -> utilfdt_read_err() -> bufsize = 1024.
As there is not much extra space in the blob to resolve symbols (long
target path), it fails with FDT_ERR_NOSPACE. In fdtoverlay, size is :
/* grow the blob to worst case */
blob_len = fdt_totalsize(blob) + total_len;
I can see assumption is made that result should be lower than:
- base fdt size + overlay size. Is there a simple way to find to know
what the final size is?
I'm not sure what the correct fix might be, for such (worst) case?
Similar issue is also seen in u-boot/common/image-fit.c that implements
similar approach (e.g. base fdt size + overlay size).
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Message-Id: <1538553302-1353-1-git-send-email-fabrice.gasnier@st.com>
[dwg: To avoid breaking bisection, I committed this after a fix, so
the "failed" description is no longer accurate]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
At present the fdtoverlay tool allocates space for its output based on a
calculation of the worse case size based on the size of the input blobs.
Except.. that certain edge cases with very long target paths can actually
exceed that "worst case" calculation.
This reworks the code to instead dynamically reallocate the output buffer
if we run out of space at any point.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Make several improvements to the error messages from the fdtoverlay helper
program: improve brevity, consistently quote filenames and print symbolic
errors from libfdt rather than a raw error number.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The fdtoverlay helper program checks if it has read a base blob which is
incomplete: that is, where the amount of data read in is less that the
declared size of the blob.
This applies the same check for safety to each overlay blob as well.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Update README.license since files now have SPDX tags rather than license
text. Adding a copy of BSD-2-Clause license since that no longer exists
within the project.
Signed-off-by: Rob Herring <robh@kernel.org>
Message-Id: <20190620211944.9378-8-robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
A couple of dtc files are missing licenses. Add GPL-2.0-or-later SPDX
tag to them.
Signed-off-by: Rob Herring <robh@kernel.org>
Message-Id: <20190620211944.9378-7-robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
A couple of libfdt files are missing licenses. Add (GPL-2.0-or-later OR
BSD-2-Clause) SPDX tag to them.
Signed-off-by: Rob Herring <robh@kernel.org>
Message-Id: <20190620211944.9378-6-robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Replace instances in tests of mostly LGPL-2.1 license boilerplate
with SPDX tags.
Signed-off-by: Rob Herring <robh@kernel.org>
Message-Id: <20190620211944.9378-5-robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Replace instances of dual GPLv2 or BSD license boilerplate with SPDX tags.
Signed-off-by: Rob Herring <robh@kernel.org>
Message-Id: <20190620211944.9378-3-robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Replace instances of GPLv2 or later boilerplate with SPDX tags.
Signed-off-by: Rob Herring <robh@kernel.org>
Message-Id: <20190620211944.9378-2-robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The YAML output fails for overlays and when symbol generation are enabled
due to missing markers in the generated properties.
Add type markers when generating properties under '__symbols__' and
'__fixups__' nodes as well as target-path properties. As a side effect of
append_to_property() changes, this also sets type markers in
'__local_fixups__' node properties.
Signed-off-by: Rob Herring <robh@kernel.org>
Message-Id: <20190517202804.9084-1-robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The typos have been discovered with the "codespell" utility.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190520081209.20415-1-thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch replaces the GPL2 text with the latest one from:
https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt
The FSF moved to a different location quite a while ago already, and
the latest revision recommends to use the LGPL-2.1 ("Lesser" license)
instead of the LGPL-2.0 ("Library" license) in certain cases.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190520072720.14755-1-thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently if a file is touched requiring libfdt.so rebuild, it will fail
because the ln -s command will attempt to replace an already existing link
an error. Correct this by using ln -sf.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Searching for duplicate names scales O(n^2) with the number of names
added to a fdt, which can cause a noticable slowdown with larger device
trees and very slow CPU cores.
Add FDT_CREATE_FLAG_NO_NAME_DEDUP that allow the caller to trade fdt size
for speed in the creation process.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20190509094122.834-4-npiggin@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
David Gibson