Previous cleanups have removed the LIBFDT_CLEANFILES and
DTC_CLEANFILES variables from the Makefiles. However, they're still
referenced by the Makefile. This patch gets rid of these last
vestiges.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch adds a new utility program, convert-dtsv0, to the dtc
sources. This program will convert dts files from v0 to v1,
preserving comments and spacing. It also includes some heuristics to
guess an appropriate base to use in the v1 output (so it will use hex
for the contents of reg properties and decimal for clock-frequency
properties, for example). They're limited and imperfect, but not
terrible.
The guts of the converter program is a modified version of the lexer
from dtc itself.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently, dtc will put the nonsense value 0xfeedbeef into the
boot_cpuid_phys field of an output blob, unless explicitly given
another value with the -b command line option. As well as being a
totally unuseful default value, this also means that dtc won't
properly preserve the boot_cpuid_phys field in -I dtb -O dtb mode.
This patch reworks things to improve the boot_cpuid handling. The new
semantics are that the output's boot_cpuid_phys value is:
the value given on the command line if -b is used
otherwise
the value from the input, if in -I dtb mode
otherwise
0
Implementation-wise we do the following:
- boot_cpuid_phys is added to struct boot_info, so that
structure now contains all of the blob's semantic information.
- dt_to_blob() and dt_to_asm() output the cpuid given in
boot_info
- dt_from_blob() fills in boot_info based on the input blob
- The other dt_from_*() functions just record 0, but we can
change this easily if e.g. we invent a way of specifying the boot cpu
in the source format.
- main() overrides the cpuid in the boot_info between input
and output if -b is given
We add some testcases to check this new behaviour.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently, main() has a variable for the input file. It used to be
that main() would open the input based on command line arguments
before passing it to the dt_from_*() function. However, only
dt_from_blob() uses this. dt_from_source() opens its own file, and
dt_from_fs() interprets the argument as as a directory and does its
own opendir() call.
Furthermore, main() opened the file with dtc_open_file() but closed it
with a direct call to fclose().
Therefore, to improve the interface consistency between the
dt_from_*() functions, make dt_from_blob() open and close its own
files like the other dt_from_*() functions.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently the Makefile.dtc and Makefile.libfdt fragments include a
number of things that seemed like they might be useful for other
projects embedding the pieces, or for a make dist target.
Well, we have no make dist target, it's become fairly unclear that
these things would actually be useful to embedders (the kernel
certainly doesn't use them), and it's a bunch of stuff with no current
users.
This patch, therefore, removes a bunch of unused definitions from the
Makefile fragments. It also removes a dependency declared in
Makefile.libfdt (of libfdt.a on the constituent .o files) which was
incorrect (wrong path), and if corrected would be redundant with the
similar dependency in the top-level makefile.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently, main() tests if it got a valid input tree from whichever
dt_from_*() function it invoked and if not, die()s. For one thing,
this test has, for no good reason, three different ways for those
functions to communicate a failure to provide input (bi NULL, bi->dt
NULL, or bi->error non-zero). For another, in every case save one, if
the dt_from_*() functions are unable to provide input they will
immediately die() (with a more specific error message) rather than
proceeding to the test in main().
Therefore, this patch removes this test, making the one case that
could have triggered it (in dt_from_source()) call die() directly
instead. With this change, the error field in struct boot_info is now
unused, so remove it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If dtc's command line arguments are invalid, it prints a usage message
and returns exit code 2. That's the same exit code as for a failed
check, which is potentially confusing if running dtc from an automated
harness. Therefore this patch changes the usage exit code to 3.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Several small cleanups to the handling of octal and hex string
escapes:
- Use strncmp() instead dof what were essentially open-coded
versions of the same, with short fixed lengths.
- The call path to get_oct_char() means an empty escape is not
possible. So replace the error message in this case with an
assert.
- Use die() instead of a non-fatal error message if
get_hex_char() is given an empty escape. Change error
message to close match gcc's in the same circumstance.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch adds a dts-format.txt in the Documentation directory, with
an introduction to the dtc source format. Note that this
documentation is also going into the upcoming ePAPR specification.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The asize field in struct data is a hangover from the early days when
a struct data was sometimes allowed to refer to a static chunk of
memory rather than a malloc()ed block.
That's long gone, since the lifetime issues were far more trouble than
it was worth, so get rid of the asize field.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently, dt_from_source() uses push_input_file() to set up the
initial input file for the lexer. That sounds sensible - put the
outermost input file at the bottom of the stack - until you realise
that what it *actually* does is pushes the current, uninitialized,
lexer input state onto the stack, then sets up the new lexer input.
That necessitates an extra check in pop_input_file(), rather than
signalling termination in the natural way when the include stack is
empty, it has to check when it pops the bogus uninitialized state off
the stack. Ick.
With that fixed, push_input_file(), pop_input_file() and
incl_file_stack itself become local to the lexer, so make them static.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
All current callers of dtc_open_file() immediately die() if it returns
an error. In a non-interative tool like dtc, it's hard to see what
you could sensibly do to recover from a failure to open an input file
in any case.
Therefore, make dtc_open_file() itself die() if there's an error
opening the requested file. This removes the need for error checking
at the callsites, and ensures a consistent error message in all cases.
While we're at it, change the rror message from fstree.c when we fail
to open the input directory to match dtc_open_file()'s error message.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch adds some testcases checking corner cases of dtc's input
file handling. Specifically it checks that dtc works correctly when
given input via stdin, and it checks that dtc fails gracefully if
given a nonexistent input file (or directory, in the case of -Ifs
mode).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch makes several small improvements to the test harness.
* An altered way of invoking shell script testcases from run_tests.sh
means scripts no longer need to me marked executable in the
repository to work properly.
* dtc.sh never did anything that was really dtc specific - with the
exception of messages, it would work equally well for any binary
that returns 0 in the successful case. Therefore, generalise dtc.sh
and fold it into run_tests.sh so we don't need a separate script any
more.
* Tweak various things so that the valgrind options are properly
propagated down to invoke dtc under valgrind when called via wrapper
scripts.
* Tweak the valgrind suppressions to work properly on a wider range of
systems (this was necessary on my machine running Ubuntu Hardy).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
At present -I dts and -I fs modes both use the fill_fullpaths() helper
function to fill in the fullpath and basenamelen fields of struct
node, which are useful in later parts of the code. -I dtb mode,
however, fills these in itself.
This patch simplifies flattree.c by making -I dtb mode use
fill_fullpaths() like the others.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
For no good reason, asm_emit_data() open-codes the equivalent of the
for_each_marker_of_type macro. Use the macro instead.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch adds testcases which test dtc when used to convert between
different dtb versions. These tests uncovered a couple of bugs
handling old dtb versions, which are also fixed.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If an input device tree has "name" properties which are correct, then
they are redundant (because they can be derived from the unit name).
Therefore, extend the checking code for correctness of "name"
properties to remove them if they are correct. dtc will still insert
name properties in the output if that's of a sufficiently old version
to require them.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Somehow the indentation of this function is messed up - 7 spaces
instead of 1 tab (probably a bad copy paste from a patch file). This
patch fixes it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch adds checks to the checking framework to verify that node
and property names contain only legal characters, and in the case of
node names there is at most one '@'.
At present when coming from dts input, this is mostly already ensured
by the grammer, however putting the check later means its easier to
generate helpful error messages rather than just "syntax error". For
dtb input, these checks replace the older similar check built into
flattree.c.
Testcases for the checks are also implemented.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Error reporting in push_input_file() is a mess. One error results in
a message and exit(1), others result in a message and return 0 - which
is turned into an exit(1) at one callsite. The other callsite doesn't
check errors, but probably should. One of the error conditions gives
a message, but can only be the result of an internal programming
error, not a user error.
So. Clean that up by making push_input_file() a void function, using
die() to report errors and quit.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since fdt_node_offset_by_compatible() was converted to the new
fdt_next_node() iterator, a chunk of initialization code became
redundant, but was not removed by oversight. This patch cleans it up.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently the CHECK_HEADER() macro is defined local to fdt_ro.c.
However, there are a handful of functions (fdt_move, rw_check_header,
fdt_open_into) from other files which could also use it (currently
they open-code something more-or-less identical). Therefore, this
patch moves CHECK_HEADER() to libfdt_internal.h and uses it in those
places.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In light of the recently discovered bug with NOP handling, this adds
some more testcases for NOP handling. Specifically, it adds a helper
program which will add a NOP tag after every existing tag in a dtb,
and runs the standard battery of tests over trees mangled in this way.
For now, this does not add a NOP at the very beginning of the
structure block. This causes problems for libfdt at present, because
we assume in many places that the root node's BEGIN_NODE tag is at
offset 0. I'm still contemplating what to do about this (with one
option being simply to declare such dtbs invalid).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
For ages dtc has included a sample dts, comment-test.dts, for checking
various lexical corner cases in comment processing. In fact, it
predates the automated testsuite, and has never been integrated into
it. This patch addresses this oversight, folding the comment handling
test in with the rest of the testsuite.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
fdt_add_subnode_namelen() has a bug if asked to add a subnode to a
node which has NOP tags interspersed with its properties. In this
case fdt_add_subnode_namelen() will put the new subnode before the
first NOP tag, even if there are properties after it, which will
result in an invalid blob.
This patch fixes the bug, and adds a testcase for it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch adds an fdt_next_node() function which can be used to
iterate through nodes of the tree while keeping track of depth. This
function is used to simplify the iteration code in a lot of other
functions, and is also exported for use by library users.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch adds an fdt_set_name() function to libfdt, mirroring
fdt_get_name(). This is a r/w function which alters the name of a
given device tree node.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This allows /include/s to work when in non-default states,
such as PROPNODECHAR.
We may want to use state stacks to get rid of BEGIN_DEFAULT() altogether...
Signed-off-by: Scott Wood <scottwood@freescale.com>
The fact that the dtc and libfdt are distributed together, but have
different licenses, can be a bit confusing. Several people have
enquired as to what the deal is with the libfdt licensing, so this
patch adds a README clarifying the situation with a rationale.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Jon Loeliger <jdl@jdl.com>
Previously, only failure to parse caused the reading of the tree to fail;
semantic errors that called yyerror() but not YYERROR only emitted a message,
without signalling make to stop the build.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Looking in the diretory dtc is invoked from is not very useful behavior.
As part of the code reorganization to implement this, I removed the
uniquifying of name storage -- it seemed a rather dubious optimization
given likely usage, and some aspects of it would have been mildly awkward
to integrate with the new code.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Currently, when used in -Idtb mode, dtc will dump information about
the input blob's header fields to stderr. This is kind of ugly, and
can get in the way of dtc's real output.
This patch, therefore, removes this. So that there's still a way of
getting this information for debugging purposes, it places something
similar to the removed code into ftdump, replacing the couple of
header fields it currently prints with a complete header dump.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch makes a bunch of updates to the TODO files for dtc and
libfdt, some of them rather overdue.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When I released libfdt, I forgot to add a copyright notice to
dumptrees.c (probably because the program is so trivial). Apparently
the lack causes trouble for Debian, so this patch adds one. I've gone
through the git history and double checked that no-one has touched
this file except me (and I barely have myself since its initial
commit).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The remaining old-style tree checking code: check_root(), check_cpus()
and check_memory() really aren't that useful. They mostly check for
the presence of particular nodes and properties. That's inherently
prone to false-positives, because we could be dealing with an
artificial tree (like many of the testcases) or it could be expected
that the missing properties are filled in by a bootloader or other
agent.
If any of these checks really turns out to be useful, we can
reimplement them later in a better conceived way on top of the new
checking infrastructure. For now, just get rid of them, removing the
last vestiges of the old-style checking code (hoorah).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently "make all" for dtc will build (but not run) the testcase
binaries. This is a problem for cross compiles, because building the
tests will attempt to run the dumptrees utility on the host system,
which won't work if it's cross-compiled of course.
Although it would be possible to separately build host binaries,
there's not a lot of value in doing so since we don't have a facility
for cross-executing the testsuite anyway.
Therefore, remove the tests from the "all" target. It will still, of
course, be build as a prerequisite to "make check" which will run the
testsuite.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch adds more documenting comments to libfdt.h. Specifically,
these document the read/write functions (not including fdt_open_into()
and fdt_pack(), for now).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch adds some more documenting comments to libfdt.h.
Specifically this documents all the write-in-place functions.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
check_msg() takes printf() like arguments, so tell gcc to produce
printf() like warnings for it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
David Gibson