fdtdump is, and always has been, a quick-and-dirty debugging tool. However
I keep getting reports of people using it for real work. For production
decompiling of a dtb, dtc in -I dtb -O dts mode is the right tool. In the
hopes of getting that message out there, add a warning message to fdtdump
to discourage its use.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It's perfectly valid for a dtb to have version and last compat version set
to the same value, and that value can be 17 (the latest defined version).
However, since 0931cea "dtc: fdtdump: check fdt if not in scanning mode"
fdtdump will refuse to process such a dtb. We get away with this in many
cases because dtc's typical output has last compat version equal to 16,
rather than 17, but it's still a bug.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This fixes a great many sparse warnings on the fdt and libfdt sources.
These are mostly due to incorrect mixing of endian annotated and native
integer types.
This includes fixing a couple of quasi-bugs where we had endian conversions
the wrong way around (this will have the right effect in practice, but is
certainly conceptually incorrect).
This doesn't make the whole tree sparse clean: there are many warnings in
bison and lex generated code, and there are a handful of other remaining
warnings that are (for now) more trouble than they're worth to fix (and
are not genuine bugs).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Running fdtdump without scan mode for an invalid file often
results in a segmentation fault because the fdt header is
not checked.
With the patch the header is checked both in scanning as
well as in non-scanning mode.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[dwg: Removed unnecessary inline, changed type from int to bool]
Reviewed-by: Simon Glass <sjg@chromium.org>
CID 132817 (#1 of 1): Integer overflowed argument (INTEGER_OVERFLOW)
15. overflow_sink: Overflowed or truncated value (or a value computed from an overflowed or truncated value) endp - p - 4L used as critical argument to function.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
1) Remove the double parentheses around two comparisons in checks.c.
The OSX LLVM-based C compiler warns about them.
2) Put an explicit "=" in the TN() macro, in accordance with c99.
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
When hacking raw fdt files, it's useful to know the actual offsets into
the file each node appears. Add a --debug mode that includes this.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Now that all utils have converted to the new usage framework, we can
rename to just plain "usage()" and avoid naming conflicts.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Often times, fdts get embedded in other larger files. Rather than force
people to `dd` the blob out themselves, make the fdtdump file smarter.
It can now scan the blob looking for the fdt magic. Once locate, it does
a little validation on the main struct to make sure we didn't hit random
binary data.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This starts a new usage framework and then cuts fdtdump over to it.
Now we can do `fdtdump -h` and get something useful back.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The function that prints a property can be useful to other programs,
so move it into util.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
in order to get the upcoming fdt type definitions.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Device tree can store multiple strings in a single property.
We didn't handle that case properly.
Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
The freetype package already installs a binary named "ftdump", so the dtc
package conflicts with that. So rename the newer dtc tool to "fdtdump".
This even makes a bit more sense:
ftdump: [F]lat device [T]ree [dump]
fdtdump: [F]lat [D]evice [T]ree [dump]
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Now that we have utilfdt_read(), ftdump should use it too.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
This useful function is split out so it will be available to programs
other than ftdump.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
This patch makes a number of minor changes to the ftdump debugging
tool.
* There was an endian bug in one place, which this fixes.
* We now use const qualifiers in a number of places where we can
* ftdump can now be instructed to read from stdin by giving "-" as
the filename.
* The buffer into which the blob is read is increased from 16k to
64k, and is now dynamically allocated.
* ftdump now emits source in dts-v1 format
Since ftdump is little used these days, these fixes are arguably of
little use. On the other hand, I already did the work of making the
changes some time back, so I guess we might as well fold these small
fixes and improvements in.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Enabling -Wcast-qual warnings in dtc shows up a number of places where
we are incorrectly discarding a const qualification. There are also
some places where we are intentionally discarding the 'const', and we
need an ugly cast through uintptr_t to suppress the warning. However,
most of these are pretty well isolated with the *_w() functions. So
in the interests of maximum safety with const qualifications, this
patch enables the warnings and fixes the existing complaints.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch turns on the -Wpointer-arith option in the dtc Makefile,
and fixes the resulting warnings due to using (void *) in pointer
arithmetic. While convenient, pointer arithmetic on void * is not
portable, so it's better that we avoid it, particularly in libfdt.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Following on from the last patch, which made dtc use the same endian
conversion functions as libfdt, this patch makes ftdump use these
functions as well. This brings us down to a single set of endian
handling functions in all of dtc and libfdt, so just one place to fix
things.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently, when used in -Idtb mode, dtc will dump information about
the input blob's header fields to stderr. This is kind of ugly, and
can get in the way of dtc's real output.
This patch, therefore, removes this. So that there's still a way of
getting this information for debugging purposes, it places something
similar to the removed code into ftdump, replacing the couple of
header fields it currently prints with a complete header dump.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In the dtc tree, both flat_dt.h and libfdt/fdt.h have structures and
constants relating to the flattened device tree format derived from
asm-powerpc/prom.h in the kernel. The former is used in dtc, the
latter in libfdt.
libfdt/fdt.h is the more recent, revised version, so use that
throughout, removing flat_dt.h.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This large patch removes all trailing whitespace from dtc (including
libfdt, the testsuite and documentation). It also removes a handful
of redundant blank lines (at the end of functions, or when there are
two blank lines together for no particular reason).
As well as anything else, this means that quilt won't whinge when I go
to convert the whole of libfdt into a patch to apply to the kernel.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
libfdt defined a new version of the flattened device tree format,
version 17. It is backwards compatible with version 16, just adding
an extra header field giving the size of the blob's structure blob.
This patch adds support to dtc allowing it to read and write version
17 blobs. It also makes version 17 the default output version for
blobs.
At the same time we change the code to consistently using decimal
numbers for versions. Previously we sometimes used 16 and sometimes
0x10 to refer to version 16.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
David Gibson