Enabling -Wcast-qual warnings in dtc shows up a number of places where
we are incorrectly discarding a const qualification. There are also
some places where we are intentionally discarding the 'const', and we
need an ugly cast through uintptr_t to suppress the warning. However,
most of these are pretty well isolated with the *_w() functions. So
in the interests of maximum safety with const qualifications, this
patch enables the warnings and fixes the existing complaints.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch turns on the -Wpointer-arith option in the dtc Makefile,
and fixes the resulting warnings due to using (void *) in pointer
arithmetic. While convenient, pointer arithmetic on void * is not
portable, so it's better that we avoid it, particularly in libfdt.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently we scan the /include/ directive as two tokens, the
"/include/" keyword itself, then the string giving the file name to
include. We use a special scanner state to keep the two linked
together, and use the scanner state stack to keep track of the
original state while we're parsing the two /include/ tokens.
This does mean that we need to enable the 'stack' option in flex,
which results in a not-easily-suppressed warning from the flex
boilerplate code. This is mildly irritating.
However, this two-token scanning of the /include/ directive also has
some extremely strange edge cases, because there are a variety of
tokens recognized in all scanner states, including INCLUDE. For
example the following strange dts file:
/include/ /dts-v1/;
/ {
/* ... */
};
Will be processed successfully with the /include/ being effectively
ignored: the '/dts-v1/' and ';' are recognized even in INCLUDE state,
then the ';' transitions us to PROPNODENAME state, throwing away
INCLUDE, and the previous state is never popped off the stack. Or
for another example this construct:
foo /include/ = "somefile.dts"
will be parsed as though it were:
foo = /include/ "somefile.dts"
Again, the '=' is scanned without leaving INCLUDE state, then the next
string triggers the include logic.
And finally, we use a different regexp for the string with the
included filename than the normal string regexpt, which is also
potentially weird.
This patch, therefore, cleans up the lexical handling of the /include/
directive. Instead of the INCLUDE state, we instead scan the whole
include directive, both keyword and filename as a single token. This
does mean a bit more complexity in extracting the filename out of
yytext, but I think it's worth it to avoid the strageness described
above. It also means it's no longer possible to put a comment between
the /include/ and the filename, but I'm really not very worried about
breaking files using such a strange construct.
I've recently worked with a FreeBSD developer, getting dtc and libfdt
working on FreeBSD. This showed up a number of portability problems
in the dtc package which this patch addresses. Changes are as
follows:
- the parent_offset and supernode_atdepth_offset testcases
used the glibc extension functions strchrnul() and strndupa(). Those
are removed, using slightly longer coding with standard C functions
instead.
- some other testcases had a #define _GNU_SOURCE for no
particular reason. This is removed.
- run_tests.sh has bash specific constructs removed, and the
interpreter changed to /bin/sh. This apparently now runs fine on
FreeBSD's /bin/sh, and I've also tested it with both ash and dash.
- convert-dtsv0-lexer.l has some extra #includes added. These
must have been included indirectly with Linux and glibc, but aren't on
FreeBSD.
- the endian handling functions in libfdt_env.h, based on
endian.h and byteswap.h are replaced with some portable open-coded
versions. Unfortunately, these result in fairly crappy code when
compiled, but as far as I can determine there doesn't seem to be any
POSIX, SUS or de facto standard way of determining endianness at
compile time, nor standard names for byteswapping functions.
- some more endian handling, from testdata.h using the
problematic endian.h is simply removed, since it wasn't actually being
used anyway.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Following on from the last patch, which made dtc use the same endian
conversion functions as libfdt, this patch makes ftdump use these
functions as well. This brings us down to a single set of endian
handling functions in all of dtc and libfdt, so just one place to fix
things.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently both libfdt and dtc define a set of endian conversion macros
for accessing the device tree blob which is always big-endian. libfdt
uses names like cpu_to_fdt32() and dtc uses names like cpu_to_be32 (as
the Linux kernel). This patch switches dtc over to using the libfdt
macros (including libfdt_env.h to supply them). This has a couple of
small advantages:
- Removes some code duplication
- Will make conversion a bit easier if we ever need to produce
little-endian device tree blobs.
- dtc no longer needs to pull in netinet/in.h simply for the
ntohs() and ntohl() functions
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently, dtc defines Linux-like names for various fixed-size integer
types. There's no good reason to do this; even Linux itself doesn't
use these names for externally visible things any more. This patch
replaces these with the C99 standardized type names from stdint.h.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch adds a testcase for the /include/ directive. It assembles
a sample dts file with many /include/ directives at a variety of
different lexical / grammatical contexts.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
On Wed, Jun 04, 2008 at 09:26:23AM -0500, Jon Loeliger wrote:
> David Gibson wrote:
>
>> But as I said that can be dealt with in the future without breaking
>> compatibility. Objection withdrawn.
>>
>
> And on that note, I officially implore Scott to
> re-submit his binary include patch!
Scott's original patch does still have some implementation details I
didn't like. So in the interests of saving time, I've addressed some
of those, added a testcase, and and now resubmitting my revised
version of Scott's patch.
dtc: Add support for binary includes.
A property's data can be populated with a file's contents
as follows:
node {
prop = /incbin/("path/to/data");
};
A subset of a file can be included by passing start and size parameters.
For example, to include bytes 8 through 23:
node {
prop = /incbin/("path/to/data", 8, 16);
};
As with /include/, non-absolute paths are looked for in the directory
of the source file that includes them.
Implementation revised, and a testcase added by David Gibson
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Scott Wood <scottwood@freescale.com>
This patch adds an extra testcase to dtc to ensure that the
"reg_format" and "ranges_format" checks trigger as they should if a
'reg' or 'ranges' property appears in the root node.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently, dtc generates a few gcc build warnings if built for a
64-bit target, due to the altered type of uint64_t and size_t. This
patch fixes the warnings (without generating new warnings for 32-bit).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Some of the helper scripts used to run testcases contain some
constructs that are bashisms. Or at least which don't work on dash,
the minimal shell used as /bin/sh on recent Ubuntu systems.
This patch removes these constructs so that the testsuite will pass
"out of the box" on systems where /bin/sh is dash.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch makes a couple of small cleanups to parameter checking of
libfdt functions.
- In several functions which take a node offset, we use an
idiom involving fdt_next_tag() first to check that we have indeed been
given a node offset. This patch adds a helper function
_fdt_check_node_offset() to encapsulate this usage of fdt_next_tag().
- In fdt_rw.c in several places we have the expanded version
of the RW_CHECK_HEADER() macro for no particular reason. This patch
replaces those instances with an invocation of the macro; that's what
it's for.
- In fdt_sw.c we rename the check_header_sw() function to
sw_check_header() to match the analgous function in fdt_rw.c, and we
provide an SW_CHECK_HEADER() wrapper macro as RW_CHECK_HEADER()
functions in fdt_rw.c
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Previous cleanups have removed the LIBFDT_CLEANFILES and
DTC_CLEANFILES variables from the Makefiles. However, they're still
referenced by the Makefile. This patch gets rid of these last
vestiges.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch adds a new utility program, convert-dtsv0, to the dtc
sources. This program will convert dts files from v0 to v1,
preserving comments and spacing. It also includes some heuristics to
guess an appropriate base to use in the v1 output (so it will use hex
for the contents of reg properties and decimal for clock-frequency
properties, for example). They're limited and imperfect, but not
terrible.
The guts of the converter program is a modified version of the lexer
from dtc itself.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently, dtc will put the nonsense value 0xfeedbeef into the
boot_cpuid_phys field of an output blob, unless explicitly given
another value with the -b command line option. As well as being a
totally unuseful default value, this also means that dtc won't
properly preserve the boot_cpuid_phys field in -I dtb -O dtb mode.
This patch reworks things to improve the boot_cpuid handling. The new
semantics are that the output's boot_cpuid_phys value is:
the value given on the command line if -b is used
otherwise
the value from the input, if in -I dtb mode
otherwise
0
Implementation-wise we do the following:
- boot_cpuid_phys is added to struct boot_info, so that
structure now contains all of the blob's semantic information.
- dt_to_blob() and dt_to_asm() output the cpuid given in
boot_info
- dt_from_blob() fills in boot_info based on the input blob
- The other dt_from_*() functions just record 0, but we can
change this easily if e.g. we invent a way of specifying the boot cpu
in the source format.
- main() overrides the cpuid in the boot_info between input
and output if -b is given
We add some testcases to check this new behaviour.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently, main() has a variable for the input file. It used to be
that main() would open the input based on command line arguments
before passing it to the dt_from_*() function. However, only
dt_from_blob() uses this. dt_from_source() opens its own file, and
dt_from_fs() interprets the argument as as a directory and does its
own opendir() call.
Furthermore, main() opened the file with dtc_open_file() but closed it
with a direct call to fclose().
Therefore, to improve the interface consistency between the
dt_from_*() functions, make dt_from_blob() open and close its own
files like the other dt_from_*() functions.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently the Makefile.dtc and Makefile.libfdt fragments include a
number of things that seemed like they might be useful for other
projects embedding the pieces, or for a make dist target.
Well, we have no make dist target, it's become fairly unclear that
these things would actually be useful to embedders (the kernel
certainly doesn't use them), and it's a bunch of stuff with no current
users.
This patch, therefore, removes a bunch of unused definitions from the
Makefile fragments. It also removes a dependency declared in
Makefile.libfdt (of libfdt.a on the constituent .o files) which was
incorrect (wrong path), and if corrected would be redundant with the
similar dependency in the top-level makefile.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently, main() tests if it got a valid input tree from whichever
dt_from_*() function it invoked and if not, die()s. For one thing,
this test has, for no good reason, three different ways for those
functions to communicate a failure to provide input (bi NULL, bi->dt
NULL, or bi->error non-zero). For another, in every case save one, if
the dt_from_*() functions are unable to provide input they will
immediately die() (with a more specific error message) rather than
proceeding to the test in main().
Therefore, this patch removes this test, making the one case that
could have triggered it (in dt_from_source()) call die() directly
instead. With this change, the error field in struct boot_info is now
unused, so remove it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If dtc's command line arguments are invalid, it prints a usage message
and returns exit code 2. That's the same exit code as for a failed
check, which is potentially confusing if running dtc from an automated
harness. Therefore this patch changes the usage exit code to 3.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Several small cleanups to the handling of octal and hex string
escapes:
- Use strncmp() instead dof what were essentially open-coded
versions of the same, with short fixed lengths.
- The call path to get_oct_char() means an empty escape is not
possible. So replace the error message in this case with an
assert.
- Use die() instead of a non-fatal error message if
get_hex_char() is given an empty escape. Change error
message to close match gcc's in the same circumstance.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch adds a dts-format.txt in the Documentation directory, with
an introduction to the dtc source format. Note that this
documentation is also going into the upcoming ePAPR specification.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The asize field in struct data is a hangover from the early days when
a struct data was sometimes allowed to refer to a static chunk of
memory rather than a malloc()ed block.
That's long gone, since the lifetime issues were far more trouble than
it was worth, so get rid of the asize field.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently, dt_from_source() uses push_input_file() to set up the
initial input file for the lexer. That sounds sensible - put the
outermost input file at the bottom of the stack - until you realise
that what it *actually* does is pushes the current, uninitialized,
lexer input state onto the stack, then sets up the new lexer input.
That necessitates an extra check in pop_input_file(), rather than
signalling termination in the natural way when the include stack is
empty, it has to check when it pops the bogus uninitialized state off
the stack. Ick.
With that fixed, push_input_file(), pop_input_file() and
incl_file_stack itself become local to the lexer, so make them static.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
All current callers of dtc_open_file() immediately die() if it returns
an error. In a non-interative tool like dtc, it's hard to see what
you could sensibly do to recover from a failure to open an input file
in any case.
Therefore, make dtc_open_file() itself die() if there's an error
opening the requested file. This removes the need for error checking
at the callsites, and ensures a consistent error message in all cases.
While we're at it, change the rror message from fstree.c when we fail
to open the input directory to match dtc_open_file()'s error message.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch adds some testcases checking corner cases of dtc's input
file handling. Specifically it checks that dtc works correctly when
given input via stdin, and it checks that dtc fails gracefully if
given a nonexistent input file (or directory, in the case of -Ifs
mode).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch makes several small improvements to the test harness.
* An altered way of invoking shell script testcases from run_tests.sh
means scripts no longer need to me marked executable in the
repository to work properly.
* dtc.sh never did anything that was really dtc specific - with the
exception of messages, it would work equally well for any binary
that returns 0 in the successful case. Therefore, generalise dtc.sh
and fold it into run_tests.sh so we don't need a separate script any
more.
* Tweak various things so that the valgrind options are properly
propagated down to invoke dtc under valgrind when called via wrapper
scripts.
* Tweak the valgrind suppressions to work properly on a wider range of
systems (this was necessary on my machine running Ubuntu Hardy).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
At present -I dts and -I fs modes both use the fill_fullpaths() helper
function to fill in the fullpath and basenamelen fields of struct
node, which are useful in later parts of the code. -I dtb mode,
however, fills these in itself.
This patch simplifies flattree.c by making -I dtb mode use
fill_fullpaths() like the others.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
For no good reason, asm_emit_data() open-codes the equivalent of the
for_each_marker_of_type macro. Use the macro instead.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch adds testcases which test dtc when used to convert between
different dtb versions. These tests uncovered a couple of bugs
handling old dtb versions, which are also fixed.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If an input device tree has "name" properties which are correct, then
they are redundant (because they can be derived from the unit name).
Therefore, extend the checking code for correctness of "name"
properties to remove them if they are correct. dtc will still insert
name properties in the output if that's of a sufficiently old version
to require them.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Somehow the indentation of this function is messed up - 7 spaces
instead of 1 tab (probably a bad copy paste from a patch file). This
patch fixes it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch adds checks to the checking framework to verify that node
and property names contain only legal characters, and in the case of
node names there is at most one '@'.
At present when coming from dts input, this is mostly already ensured
by the grammer, however putting the check later means its easier to
generate helpful error messages rather than just "syntax error". For
dtb input, these checks replace the older similar check built into
flattree.c.
Testcases for the checks are also implemented.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Error reporting in push_input_file() is a mess. One error results in
a message and exit(1), others result in a message and return 0 - which
is turned into an exit(1) at one callsite. The other callsite doesn't
check errors, but probably should. One of the error conditions gives
a message, but can only be the result of an internal programming
error, not a user error.
So. Clean that up by making push_input_file() a void function, using
die() to report errors and quit.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since fdt_node_offset_by_compatible() was converted to the new
fdt_next_node() iterator, a chunk of initialization code became
redundant, but was not removed by oversight. This patch cleans it up.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently the CHECK_HEADER() macro is defined local to fdt_ro.c.
However, there are a handful of functions (fdt_move, rw_check_header,
fdt_open_into) from other files which could also use it (currently
they open-code something more-or-less identical). Therefore, this
patch moves CHECK_HEADER() to libfdt_internal.h and uses it in those
places.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In light of the recently discovered bug with NOP handling, this adds
some more testcases for NOP handling. Specifically, it adds a helper
program which will add a NOP tag after every existing tag in a dtb,
and runs the standard battery of tests over trees mangled in this way.
For now, this does not add a NOP at the very beginning of the
structure block. This causes problems for libfdt at present, because
we assume in many places that the root node's BEGIN_NODE tag is at
offset 0. I'm still contemplating what to do about this (with one
option being simply to declare such dtbs invalid).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
For ages dtc has included a sample dts, comment-test.dts, for checking
various lexical corner cases in comment processing. In fact, it
predates the automated testsuite, and has never been integrated into
it. This patch addresses this oversight, folding the comment handling
test in with the rest of the testsuite.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
fdt_add_subnode_namelen() has a bug if asked to add a subnode to a
node which has NOP tags interspersed with its properties. In this
case fdt_add_subnode_namelen() will put the new subnode before the
first NOP tag, even if there are properties after it, which will
result in an invalid blob.
This patch fixes the bug, and adds a testcase for it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch adds an fdt_next_node() function which can be used to
iterate through nodes of the tree while keeping track of depth. This
function is used to simplify the iteration code in a lot of other
functions, and is also exported for use by library users.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch adds an fdt_set_name() function to libfdt, mirroring
fdt_get_name(). This is a r/w function which alters the name of a
given device tree node.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This allows /include/s to work when in non-default states,
such as PROPNODECHAR.
We may want to use state stacks to get rid of BEGIN_DEFAULT() altogether...
Signed-off-by: Scott Wood <scottwood@freescale.com>
David Gibson