This patch changes the dtc grammar to allow following syntax
i2cexp: &i2c2 {
...
};
Current device tree compiler allows to define multiple labels when defining
the device node the first time. Typically device nodes are defined in
DTSI files. Now these nodes can be overwritten for updating some of the
properties. Typically, device nodes are overridden in DTS files.
When working with adapter boards, most of the time adapter board can fit to
multiple base boards. But depending on which base board it is connected to,
the devices on the adapter board would be children of different devices.
e.g. On dra7-evm.dts, i2c2 is exported for expansion connector whereas
on dra72-evm.dts, i2c5 is exported for expansion connector.
This causes a problem when writing a generic device tree file for
the adapter board. Because, you cannot know whether all the devices on
adapter board are present on i2c or i2c5.
The problem can be solved by adding a common label (e.g. i2cexp) in both
of the DTS files when overriding the device nodes for i2c2 or i2c5.
This way, generic adapter board file would override the i2cexp. And
depending on which base board you use the adapter board, all the devices
are automatically added for correct device nodes.
Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
For example:
reserved-names="res1\0res2\0res3";
Where \0 is an actual embedded NUL in the source instead of a string
escape. To achieve this, use the len given by the lexer instead of
strlen.
Without this patch dtc will mangle the output and possibly hang on
realloc.
This has been there for ages, but the assertion makes no sense in the
context of the test immediately preceding it. This caused an abort()
when in -I dts -O dts mode with the right sort of internal labels in a
string property value.
Add a testcase for this and another candidate edge case (though this one
we already get right).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We can test fdtdump by comparing its output with the source file that was
compiled by dtc. Add a simple test that should at least catch regressions
in basic functionality.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch makes a small start on libfdt functions which actually help to
parse the contents of device trees, rather than purely manipulating the
tree's structure.
We add simple helpers to read and sanity check the #address-cells and
#size-cells values for a given node.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
At present, the lexer token for references to a path doesn't permit a
reference to the root node &{/}. Fixing the lexer exposes another bug
handling this case.
This patch fixes both bugs and adds testcases.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The sw_tree1 testcase has accumulated some valgrind errors, at least in
the "realloc" mode.
* It had both a realloc_fdt() and explicit xmalloc() for the initial
allocation which was redundant and caused errors.
* It doesn't make sense to call fdt_resize() until after we've created
the initial stub tree
* Alignment gaps inserted into the tree contain uninitialized data, which
trips an error when we write it out. We could zero the buffer, but that
would make it easier to miss real bugs, so we add suppressions for the
valgrind warnings instead.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is a debugging convenience option, which makes it much easier to find
the failing tests and fix them one by one.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
At present, when using sequential write mode, there's no straightforward
means of resizing the buffer the fdt is being built into. This patch
adds an fdt_resize() function for this purpose.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
ePAPR 1.1 section 2.2.1.1 "Node Name Requirements" specifies that any
node that has a reg property must include a unit address in its name
with value matching the first entry in its reg property. Conversely, if
a node does not have a reg property, the node name must not include a
unit address.
Adjust all the dtc test-cases to conform to this rule.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Previously, the #line parsing regex ended with ({WS}+[0-9]+)?. The {WS}
could match line-break characters. If the #line directive did not contain
the optional flags field at the end, this could cause any integer data on
the next line to be consumed as part of the #line directive parsing. This
could cause syntax errors (i.e. #line parsing consuming the leading 0
from a hex literal 0x1234, leaving x1234 to be parsed as cell data,
which is a syntax error), or invalid compilation results (i.e. simply
consuming literal 1234 as part of the #line processing, thus removing it
from the cell data).
Fix this by replacing {WS} with [ \t] so that it can't match line-breaks.
Convert all instances of {WS}, even though the other instances should be
irrelevant for any well-formed #line directive. This is done for
consistency and ultimate safety.
Reported-by: Ian Campbell <Ian.Campbell@citrix.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
If you try to insert a new node or extend a property with large value,
using fdtput you will notice that it always fails.
example:
fdtput -v -p -ts ./tst.dtb "/node-1" "property-1" "value-1
Error at 'node-1': FDT_ERR_NOSPACE
or
fdtput -v -c ./tst.dtb "/node-1"
Error at 'node-1': FDT_ERR_NOSPACE
or
fdtput -v -ts ./tst.dtb "/node" "property" "very big value"
Decoding value:
string: 'very big value'
Value size 15
Error at 'property': FDT_ERR_NOSPACE
All these error are returned from libfdt, as the size of the fdt passed
has no space to accomdate these new properties.
This patch adds realloc functions in fdtput to allocate new space in fdt
when it detects a shortage in space for new value or node. With this
patch, fdtput can insert a new node or property or extend a property
with new value greater than original size. Also it packs the final blob
to clean up any extra padding.
Without this patch fdtput tool complains with FDT_ERR_NOSPACE when we
try to add a node/property or extend the value of a property.
Testcases for the new behaviour added by David Gibson.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There are a couple of fdtput related tests which are rather pointless -
they explicitly test for the presence of an undesirable limitation in
fdtput, which will cause test failures when we fix it. This patch removes
the tests.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We have certain tests which generate extremely long command lines, which
are shortened in the testsuite output with the 'shorten_echo' function.
Currently that is used in run_fdtput_test and run_wrap_test, this patch
uses it for run_wrap_test as well, allowing more general tests with long
command lines.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Iterating through subnodes with libfdt is a little painful to write as we
need something like this:
for (depth = 0, count = 0,
offset = fdt_next_node(fdt, parent_offset, &depth);
(offset >= 0) && (depth > 0);
offset = fdt_next_node(fdt, offset, &depth)) {
if (depth == 1) {
/* code body */
}
}
Using fdt_next_subnode() we can instead write this, which is shorter and
easier to get right:
for (offset = fdt_first_subnode(fdt, parent_offset);
offset >= 0;
offset = fdt_next_subnode(fdt, offset)) {
/* code body */
}
Also, it doesn't require two levels of indentation for the loop body.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
For a follow up commit, we want to be able to scan the buffer that was
returned to us. In order to do that safely, we need to know how big
the buffer actually is, so pass that back if requested.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This commit which changed the behaviour of this function broke one
of the tests. Also the comment should be updated to reflect its new
behaviour.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Not all /bin/echo implementations support the -e option. Instead, use
printf, which appears to be more widely available than /bin/echo -e.
See commit eaec1db "fdtget-runtest.sh: Fix failures when /bin/sh isn't
bash" for history.
I have tested this on Ubuntu 10.04 with /bin/sh pointing to both dash
and bash.
Reported-by: Mike Frysinger <vapier@gentoo.org> # and implemented-by
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
tests will need fdt type definitions provided in a subsequent patch
to libfdt_env.h. Since libfdt.h includes libfdt_env.h in the right
order anyway, just remove the fdt.h include.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
The previous definition of for_each_*() would always include the very
first object within the list, irrespective of whether it was marked
deleted, since the deleted flag was not checked on the first object,
but only on any "next" object.
Fix for_each_*() to check the deleted flag in the loop body every
iteration to correct this.
Incidentally, this change is why commit 45013d8 dtc: "Add ability to
delete nodes and properties" only caused two "make checkm" failures;
only two tests actually use multiple labels on the same property or
node. With this current change applied, but commit 317a5d9 "dtc: zero
out new label objects" reverted, "make checkm" fails 29 times; i.e.
for every test that uses any labels at all.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Line control directives of the following formats are supported:
#line LINE "FILE"
# LINE "FILE" [FLAGS]
This allows dtc to consume the output of pre-processors, and to provide
error messages that refer to the original filename, including taking
into account any #include directives that the pre-processor may have
performed.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
The device tree language as currently defined conflicts with the C pre-
processor in one aspect - when a property or node name begins with a #
character, a pre-processor would attempt to interpret it as a directive,
fail, and most likely error out.
This change allows a property/node name to be prefixed with \. This
prevents a pre-processor from seeing # as the first non-whitespace
character on the line, and hence prevents the conflict. \ was previously
an illegal character in property/node names, so this change is
backwards compatible. The \ is stripped from the name during parsing
by dtc.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
dtc currently allows the contents of properties to be changed, and the
contents of nodes to be added to. There are situations where removing
properties or nodes may be useful. This change implements the following
syntax to do that:
/ {
/delete-property/ propname;
/delete-node/ nodename;
};
or:
/delete-node/ &noderef;
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
This option mimics mkdir's -p option. It automatically creates nodes
as needed along the path provided. If the node already exists, no
error is given.
Signed-off-by: Simon Glass <sjg@chromium.org>
This option allows the creation of new nodes in a dtb file. The syntax
is:
fdtput -c <dtb_file> <node_path>
The node_path contains the path of the node to be created. All path
components up to the final one must exist already. The final one must
not exist already.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
This patch adds -W and -E options to dtc which allow toggling on and off
of the various built in semantic checks on the tree.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When merging one device tree over the top of a previous tree, it is
possible to define a duplicate label that has the same name and points
to the same property or node. This is currently allowed by the duplicate
label checking code. However, alternative duplicate label checking
algorithms might not allow this. Add an explicit test to ensure this
capability is maintained.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
When compiling the current code-base with gcc 4.6.1, the following warning
is raised, which is interpreted as an error:
cc1: warnings being treated as errors
tests/setprop_inplace.c: In function ‘main’:
tests/setprop_inplace.c:62: error: format ‘%016llx’ expects type ‘long long unsigned int’, but argument 2 has type ‘uint64_t’
tests/setprop_inplace.c:68: error: format ‘%016llx’ expects type ‘long long unsigned int’, but argument 2 has type ‘uint64_t’
Use printf format specifiers from <inttypes.h> to solve this.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
The libfdt read/write functions are now usable enough that it's become a
moderately common pattern to use them to build and manipulate a device
tree from scratch. For example, we do so ourself in our rw_tree1 testcase,
and qemu is starting to use this model when building device trees for some
targets such as e500.
However, the read/write functions require some sort of valid tree to begin
with, so this necessitates either having a trivial canned dtb to begin with
or, more commonly, creating an empty tree using the serial-write functions
first.
This patch adds a helper function which uses the serial-write functions to
create a trivial, empty but complete and valid tree in a supplied buffer,
ready for manipulation with the read/write functions.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In device trees in the world, properties consisting of a single 64-bit
integer are not as common as those consisting of a single 32-bit, cell
sized integer, but they're common enough that they're worth including
convenience functions for.
This patch adds helper wrappers of fdt_setprop_inplace(), fdt_setprop() and
fdt_appendprop() for handling 64-bit integer quantities in properties. For
better consistency with the names of these new *_u64() functions we also
add *_u32() functions as alternative names for the existing *_cell()
functions handling 32-bit integers.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The testcases based on test_tree1_dts0.dts were added purely to test dtc's
backwards compatibility handling of the old dts-v0 format. Since that
support has been removed, the dts has been updated to use the current
dts-v1 syntax, which makes the testcases pass, but be completely useless.
This patch removes the now obsolete testcases.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Several files were added, and should be in .gitignore. The *.test.dts
pattern should catch future source files which are generated by tests.
It also subsumes the old *.dtb.test.dts pattern.
Signed-off-by: Simon Glass <sjg@chromium.org>
Written by David Gibson <david@gibson.dropbear.id.au>. Additions by me:
* Ported to ToT dtc.
* Renamed cell to integer throughout.
* Implemented value range checks.
* Allow U/L/UL/LL/ULL suffix on literals.
* Enabled the commented test.
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
On Ubuntu, /bin/sh is dash (at least by default), and dash's echo doesn't
accept the -e option. This means that fdtget-runtest.sh's EXPECT file will
contain "-e foo" rather than just "foo", which causes a test failure.
To work around this, run /bin/echo instead of (builtin) echo, which has
more chance of supporting the -e option.
Another possible fix is to change all the #! lines to /bin/bash rather
than /bin/sh, and change run_tests.sh to invoke sub-scripts using $SHELL
instead of just "sh". However, that would require bash specifically, which
may not be desirable.
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
It is often inconvenient to place device tree files in the same directory
as their includes, or to specify the full path to include files.
An example of this is in U-Boot where we have a .dtsi file for each SOC
type, and this is included by the board .dts file. We need to either use
a mechanism like:
/include/ ARCH_CPU_DTS
with sed or cpp to perform the replacement with the correct path, or
we must specify the full path in the file:
/include/ "../../arch/arm/dts/tegra20.dtsi"
The first option is not desirable since it requires anyone compiling the
file to first pre-process it. The second is not desirable since it
introduces a path which is project-specific into a file which is supposed
to be a hardware description. For example Linux and U-Boot are unlikely to
put these include files in the same place.
It is much more convenient to specify the search patch on the command line
as is done with C pre-processors, for example.
Introduce a -i option to add to the list of search paths used to find
source and include files.
We cannot use -I as it is already in use. Other suggestions welcome.
Signed-off-by: Simon Glass <sjg@chromium.org>
Sometimes the requested node or property is not present in the device
tree. This option provides a way of reporting a default value in this
case, rather than halting with an error.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
There is a rather unfortunate bug in fdtget in that if multiple argument
sets are provided, it just repeats displaying the first set ones for
each set.
Fix this bug and add a test for it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Currently run_tests.sh generates several files of text test data. The
procedure it uses for this is somewhat torturous and has several problems:
* Since the test data is derived from a dts file, a cursory glance at the
test output suggests something is wrong with the processing of that dts.
This is misleading since in fact it's just being used as an arbirary
string.
* Since the base input has linefeeds removed, the head and sort commands
used later have no effect.
* Although an attempt is made to get rid of characters which the shell
will mangle, it's not thorough enough. Specifically it leaves in \ which
means that some string escapes found in the input data can get expanded
somewhere along the line in some shells.
This patch, therefore, replaces this generation of test data with a
pre-canned "Lorem ipsum" of approximately 2k. On my system, where /bin/sh
is dash, this fixes a test failure due to the aforementioned string
escapes being evaluated on one but not the other of the two comparison
paths (I haven't tracked down exactly where the expansion is happening).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently the fdt{get,put}-runtest.sh scripts invoke diff to check if
fdt{get,put} did the right thing. This isn't great though: it's not
obvious from the diff output which is the expected and which is the
actual result; diff's line by line behaviour is useless here, since all
the results are a single line and finally, when there is a difference
it always prints information even when the tests are supposed to be
running in quiet mode.
This patch uses cmp instead, and explicitly prints the expected results,
when running in verbose mode (the invocation of fdtget itself will have
already displayed the actual results in this mode.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch cleans up how the fdtget and fdtput tests are invoked.
Specifically we no longer hide the full command lines with a wrapper
function - this makes it possible to distinguish fdtget from similar
fdtput tests and makes it easier to work out how to manually invoke an
individual failing test.
In addition, we remove the testing for errors from the
fdt{get,put}-runtest.sh script, instead using an internal wrapper
analagous to run_wrap_test which can test for any program invocation
that's expected to return an error.
For a couple of the fdtput tests this would result in printing out
ludicrously large command lines. Therefore we introduce a new
mechanism to cut those down to something reasonable.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Several test scripts now have some code to check for a program returning
a signal, and reporting a suitable failure. This patch moves this
duplicated code into a helper function in tests.sh. At the same time we
remove a bashism found in the current copies (using the non portablr $[ ]
construct for arithmetic).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The patches introducing fdtget and fdtput inserted a peculiar bashism to
run_tests.sh using non-portable assignment within an (( )) expression.
This patch fixes it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Some of the test scripts create temporary files, which we remove at the
end. Except that we usually forgot to remove them on some exit paths. To
avoid this problem in future, this modifies the scripts to use the shell's
trap 0 functionality to automatically remove the temporaries on any exit.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Several of the test scripts remove $TMPFILE, without ever having set
the TMPFILE variable. This patch fixes it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We've add some test (generated) binaries that aren't currently listed in
.gitignore, in addition more scripts now generate various tmp.* files
during operation. This adds them all to .gitignore.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Nikhil Devshatwar