Commit 7c44c2f9cb broke backwards
compatibility more badly than I realised. Contrary to what I thought
there are in-kernel, in-use dts files which relied on
references-to-path with paths including a comma, which no longer
compile after that commit.
So, this patch reinstates full support for bare references-to-path in
dts-v0 input. This means there will be some rather surprising lexical
corner cases when using path-expanded references in v0 files. But,
since path-expanded references are new, v0 files shouldn't typically
be using them anyway. If the corner cases cause a problem, you can
always convert to dts-v1 which handles the lexical issues here more
nicely.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This converts the test for the obsolete "interrupt-controller"
property in /chosen to the new framework. That was the only thing
left in the old-style check_chosen() function, so that function is
removed, too.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch converts checks related to #address-cells and #size-cells
to the new framework. Specifically, it reimplements the check that
"reg" properties have a valid size based on the relevant
#address-cells and #size-cells values. The new implementation uses
the correct default value, unlike the old-style check which assumed
the values were inherited by default.
It also implements a new, similar test for "ranges" properties.
Finally, since relying on the default values of these variables is
considered not-good-practice these days, it implements a "style" check
which will give a warning if the tree ever relies on the default
values (that is if any node with either "reg" or "ranges" appears
under a parent which has no #address-cells or #size-cells property).
After the last couple of patches converting various old-style semantic
checks to the new framework, the only thing that the old-style
check_properties() function still checks is that the size of "reg"
properties is a multiple of the cell size.
This patch removes check_properties() and all related code and data.
The check on the size of reg properties is folded into the existing
check for the format of "reg" properties (still old-style for the time
being).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch converts to the new tree checking framework those checks
which verify that certain properties (device_type, model) have a
string value, when present.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch converts to the new tree checking framework those checks
which verify that certain properties (#address-cells and #size-cells)
are exactly one cell in size, when present.
We also drop the old-style check for "linux,phandle" being one cell,
since that is already implied in the the existing new-style checks on
the linux,phandle property.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch modifies the dtc-checkfails.sh testcase wrapper so that
instead of testing just that dtc fails with a particular error code on
the sample input, it scans dtc's stderr output looking for a message
that dtc failed a specific check or checks. This has several advantages:
- It means we more precisely check dtc's checking behaviour
- It means we can check for generation of warnings using the
same script
- It means we can test cases where dtc should generate
multiple errors or warnings from different checks
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Author: Geoff Levand <geoffrey.levand@am.sony.com>
Apparently some versions of flex don't correctly parse the -o
parameter, if there's a space between the -o and its argument. So,
this patch removes it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch extends dtc syntax to allow references (&label, or
&{/full/path}) directly within property definitions, rather than
inside a cell list. Such references are expanded to the full path of
the referenced node, as a string, instead of to a phandle as
references within cell lists are evaluated.
A testcase is also included.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
"Add an option to pad the blob that is generated" broke the padding
support. We were updating the fdt header after writing it.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
On several occasions, I've accidentally put properties after subnodes
in a dts file. I've then spent ages thinking that the resulting
syntax error was because of something else.
This patch arranges for this specific syntax error to generate a more
specific and useful error message.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch applies a couple of tiny cleanups to the lexer. The
not-very-useful 'WS' named pattern is removed, and the debugging
printf() for single character tokens is moved to the top of the
action, which results in less confusing output when LEXDEBUG is
switched on (because it goes before the printf()s for possible
resulting lexer state changes).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch removes the old-style checking code for the "name" property
- i.e. verifying that the "name" property, if present, matches the
node name. It replaces it with a pair of more-or-less equivalent
checks in the new checking framework.
This also promotes this check to a "structural" check, or at least an
error-rather-than-warning test, since the structural/semantic
distinction doesn't really apply in the new framework.
A testcase for the check is also added.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The way the checking subsystem FAIL() macro is currently implemented
it must take at least one paramater after the format string. This
patch corrects the problem.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This adds 'const' qualifiers to many variables and functions. In
particular it's now used for passing names to the tree accesor
functions.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
My rework of the tree checking code introduced a potentially nasty bug
- it uses the structure_ok variable uninitialized. This patch fixes
the problem. It's a fairly ugly bandaid approach, but the ugly will
disappear once future patches have folded the semantic checks into the
new framework.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There are times when we need extra space in the blob and just want
to have it added on w/o know the exact size to make it.
The padding and min size options are mutually exclusive.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
The recent change to the lexer to only recognize property and node
names in the appropriate context removed a number of lexical warts in
our language that would have gotten ugly as we add expression support
and so forth.
But there's one nasty one remaining: references can contain a full
path, including the various problematic node name characters (',', '+'
and '-', for example). This would cause trouble with expressions, and
it also causes trouble with the patch I'm working on to allow
expanding references to paths rather than phandles. This patch
therefore reworks the lexer to mitigate these problems.
- References to labels cause no problems. These are now
recognized separately from references to full paths. No syntax change
here.
- References to full paths, including problematic characters
are allowed by "quoting" the path with braces
e.g. &{/pci@10000/somedevice@3,8000}. The braces protect any internal
problematic characters from being confused with operators or whatever.
- For compatibility with existing dts files, in v0 dts files
we allow bare references to paths as before &/foo/bar/whatever - but
*only* if the path contains no troublesome characters. Specifically
only [a-zA-Z0-9_@/] are allowed.
This is an incompatible change to the dts-v1 format, but since AFAIK
no-one has yet switched to dts-v1 files, I think we can get away with
it. Better to make the transition when people to convert to v1, and
get rid of the problematic old syntax.
Strictly speaking, it's also an incompatible change to the v0 format,
since some path references that were allowed before are no longer
allowed. I suspect no-one has been using the no-longer-supported
forms (certainly none of the kernel dts files will cause trouble).
We might need to think about this harder, though.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently, every 'data' object, used to represent property values, has
two lists of fixup structures - one for labels and one for references.
Sometimes we want to look at them separately, but other times we need
to consider both types of fixup.
I'm planning to implement string references, where a full path rather
than a phandle is substituted into a property value. Adding yet
another list of fixups for that would start to get silly. So, this
patch merges the "refs" and "labels" lists into a single list of
"markers", each of which has a type field indicating if it represents
a label or a phandle reference. String references or any other new
type of in-data marker will then just need a new type value - merging
data blocks and other common manipulations will just work.
While I was at it I made some cleanups to the handling of fixups which
simplify things further.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
dtc: Flexible tree checking infrastructure
Here, at last, is a substantial start on revising dtc's infrastructure
for checking the tree; this is the rework I've been saying was
necessary practically since dtc was first release.
In the new model, we have a table of "check" structures, each with a
name, references to checking functions, and status variables. Each
check can (in principle) be individually switched off or on (as either
a warning or error). Checks have a list of prerequisites, so if
checks need to rely on results from earlier checks to make sense (or
even to avoid crashing) they just need to list the relevant other
checks there.
For now, only the "structural" checks and the fixups for phandle
references are converted to the new mechanism. The rather more
involved semantic checks (which is where this new mechanism will
really be useful) will have to be converted in future patches.
At present, there's no user interface for turning on/off the checks -
the -f option now forces output even if "error" level checks fail.
Again, future patches will be needed to add the fine-grained control,
but that should be quite straightforward with the infrastructure
implemented here.
Also adds a testcase for the handling of bad references, which catches
a bug encountered while developing this patch.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch adds some options to the run_tests.sh script allowing it to
run all the testcases under valgrind to check for pointer corruption
bugs and memory leaks. Invoking "make checkm" will run the testsuite
with valgrind.
It include a mechanism for specifying valgrind errors to be suppressed
on a per-testcase basis, and adds a couple of such suppression files
for the mangle-layout and open_pack testcases which dump for use by
other testcases a buffer which may contain uninitialized sections. We
use suppressions rather than initializing the buffer so that valgrind
will catch any internal access s to the uninitialized data, which
would be a bug.
The patch also fixes one genuine bug caught by valgrind -
_packblocks() in fdt_rw.c was using memcpy() where it should have been
using memmove().
At present the valgrinding won't do anything useful for testcases
invoked via a shell script - which includes all the dtc testcases. I
plan to fix that later.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch removes a number of testcases from the testsuite that are
extremely unlikely to find any bugs that won't be found by the other
tests. This speeds up the testsuite.
- Both loops across the various tree block layouts run the
tree1_tests on the basic mangled tree. This is completely redundant,
so remove the second copy. This removes 456 testcases.
- We currently run tree1_tests on various trees manipulated by
move_and_save. We replace those with just a dtbs_equal_ordered test
to check that the manipulated tree is equal to the original. What
we're testing here is that fdt_move() operates correctly - it's very
unlikely it would succeed well enough for the ordered_equal test to
succeed, but the tree1_tests would fail on the result. This removes
162 testcases.
- Currently we re-ordered with mangle-layout both the basic
test_tree1.dtb and sw_tree1.test.dtb. Since we've already checked
that these dtbs are equivalent with dtbs_ordered_equal, it's very
unlikely that the tests would fail on one but not the other.
Therefore reduce this to only using test_tree1.dtb. This removes 828
testcases.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Lots of room for improvement here. Command line options, etc.
The script iterates over a hard-coded list of kernel DTS files.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
The run_tests.sh script currently invokes the testcase binaries via
env(1). This behaviour is inherited from the libhugetlbfs testsuite
which uses this approach to easily set various configuration
environment variables in testcases.
We don't use that for dtc, and are unlikely to ever want to.
Therefore this patch removes that technique, which substantially
speeds up the testsuite.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch adds a group of testcases to check that dtc correctly
rejects trees with various structural errors.
To make things easier to test, we change dtc so that failing checks
(as opposed to other errors) result in exit code 2.
This patch also fixes an embarrasing bug uncovered by these new tests:
check_phandles() worked out if the tree's phandles were valid, then
throws that information away and returns success always.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The fdt_offset_ptr_typed() macro seemed like a good idea at the time.
However, it's not actually used all that often, it can silently throw
away const qualifications and it uses a gcc extension (typeof) which
I'd prefer to avoid for portability.
Therefore, this patch gets rid of it (and the fdt_offset_ptr_typed_w()
variant which was never used at all). It also makes a few variables
const in testcases, which always should have been const, but weren't
caught before because of the aforementioned silent discards.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In a number of places through libfdt and its tests, we have *_typed()
macro variants on functions which use gcc's typeof and statement
expression extensions to allow passing literals where the underlying
function takes a buffer and size.
These seemed like a good idea at the time, but in fact they have some
problems. They use typeof and statement expressions, extensions I'd
prefer to avoid for portability. Plus, they have potential gotchas -
although they'll deal with the size of the thing passed, they won't
deal with other representation issues (like endianness) and results
could be very strange if the type of the expression passed isn't what
you think it is.
In fact, the only users of these _typed() macros were when the value
passed is a single cell (32-bit integer). Therefore, this patch
removes all these _typed() macros and replaces them with explicit
_cell() variants which handle a single 32-bit integer, and which also
perform endian convesions as appropriate.
With this in place, it now becomes easy to use standardized big-endian
representation for integer valued properties in the testcases,
regardless of the platform we're running on. We therefore do that,
which has the additional advantage that all the example trees created
during a test run are now byte-for-byte identical regardless of
platform.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch adds fdt_get_phandle() and fdt_node_offset_by_phandle()
functions to libfdt. fdt_get_phandle() will retreive the phandle
value of a given node, and fdt_node_offset_by_phandle() will locate a
node given a phandle.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
At present, the Makefiles will not rebuild trees.o or the dtb files
derived from it if testdata.h is updated. This is incorrect, and is
because of missing dependency information.
This patch fixes the problem by making sure that dependency
information is generated from trees.S and dumptrees.c.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch alters the -Odts mode output so that it uses dts-v1 format.
This means that dtc -Idts -Odts used on a v0 dts file will convert
that file to v1.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
dtc: Switch dtc to C-style literals
This patch introduces a new version of dts file, distinguished from
older files by starting with the special token /dts-v1/. dts files in
the new version take C-style literals instead of the old bare hex or
OF-style base notation. In addition, the "range" for of memreserve entries
(/memreserve/ f0000-fffff) is no longer recognized in the new format.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
The current scheme of having CELLDATA and MEMRESERVE states to
recognize hex literals instead of node or property names is
arse-backwards. The patch switches things around so that literals are
lexed in normal states, and property/node names are only recognized in
the special PROPNODENAME state, which is only entered after a { or a
;, and is left as soon as we scan a property/node name or a keyword.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
This patch documents a few more functions in libfdt.h. All the
read-only functions are now documented.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch alters the main testcase, and the dts file corresponding to
it so that we at least trivially exercise dtc's bytestring and base
conversion features.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch adds a batch of testcases exercising dtc's -Odts mode.
Specifically it checks that using dtc to convert dtb->dts->dtb
preserves the original dtb for a number of example dtb files.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch changes -Odts mode output so that labels within property
values in the input are preserved in the output. Applied on top of
the earlier patch to preserve node and property labels in -Odts mode,
this means that dtc in -Idts -Odts mode will transfer all labels in
the input to the output.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently the main recursive tree printing function,
write_tree_source_node(), calls guess_type() to apply heuristics to
see how to print a property value, then calls the appropriate
write_propval_*() function to print it.
However, future heuristics for handling internal labels and the like
don't work well this way. Therefore, this patch refactors things to
have write_tree_source_node() call a new write_propval() function,
which incorporates the heurstic logic from guess_type() and also calls
the right function to do the actual printing.
No behavioural change.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There is a bug in the sw_tree1 testcase / utility which puts two
"compatible" properties in one node in the output tree. This patch
fixes the bug, and also adds a new test checking that the sw_tree1
output is equal to test_tree1.dtb as its supposed to be, which should
catch future errors of this type.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch documents a few more functions in libfdt.h. It also makes
a slight update to the description of the FDT_ERR_INTERNAL error code.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
libfdt: Add more documentation (patch the third)
This patch adds documentation in libfdt.h for a few more libfdt
functions. It also makes a slight update to the documentation of
fdt_get_name().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
/usr/bin/install: cannot stat `fdt.h': No such file or directory
/usr/bin/install: cannot stat `libfdt.h': No such file or directory
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
At present, defining a property as, say:
foo = [abcd], <ffffffff>;
Will cause dtc to insert 2 bytes of zeros between the abcd and the
ffffffff, to align the cell form data.
Doing so seemed like a good idea at the time, but I don't believe
there are any users who actually rely on this behaviour. Segher
claims that OF has some defined bindings which include properties an
unaligned subsection of which is interpreted as 32-bit ints (i.e. like
cell data).
Worse, this alignment will cause nothing but pain when we add
expression support to dtc (when celldata is included in a larger
bytestring expession, we won't know the size of the preceding chunk of
the expression until it's evaluated, so we would have to carry
alignment fixup information right through the expression evaluation
process).
Therefore, this patch kills off this alignment behaviour.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch changes -Odts mode output so that labels on properties,
nodes and memreserve entries in input source are preserved in the
output.
Preserving labels within property values is trickier - another patch
coming later.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Remove the uneccessary LDFLAGS from the top-level makefile. It only
added libfdt/ to the link path. dtc doesn't need libfdt at all, and
the testcases which do, already link libfdt.a by explicit path.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch moves the dtc code for checking the device tree its
processing into a new checks.c. The tree accessor functions from
livetree.c which the checks use are exported and added to dtc.h.
Another small step towards a flexible checking architecture.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently all the read/write functions in libfdt require that the
given tree be v17, and further, that the tree has the memory
reservation block, structure block and strings block stored in that
physical order.
This patch eases these constraints, by making fdt_open_int() reorder
the blocks, and/or convert the tree to v17, so that it will then be
ready for the other read-write functions.
It also extends fdt_pack() to actually remove any gaps between blocks
that might be present.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If future dtb version > 17 are defined, that are still backwards
compatible with v16, libfdt will of course be able to read and
understand them. However, when modifying such a tree, it can't
guarantee that it won't clobber additional structure from the new
version which it doesn't know about. Therefore, before making
modifications to a tree of version >17, we must change it's version to
be exactly 17.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
David Gibson