Add a check for parsing 'interrupt-map' properties. The check primarily
tests parsing 'interrupt-map' properties which depends on and the parent
interrupt controller (or another map) node.
Note that this does not require '#address-cells' in the interrupt-map
parent, but treats missing '#address-cells' as 0 which is how the Linux
kernel parses it. There's numerous cases that expect this behavior.
Cc: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Message-Id: <20211015213527.2237774-1-robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The dts output will just output phandle integer values, but often the
necessary markers are present with path or label references. Improve the
output and maintain phandle label or path references when present in dts
output.
Signed-off-by: Rob Herring <robh@kernel.org>
Message-Id: <20210727183023.3212077-6-robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
tests/trees.S is a weird thing: a portable aseembler file, used to produce
a specific binary output. Currently it uses CPP macros quite heavily to
construct the dtbs we want (including some partial and broken trees).
Using cpp has the side effect that we need to use ; separators between
instructions (or, rather, pseudo-ops), because cpp won't expand newlines.
However, it turns out that while ; is a suitable separator on most
targets, it doesn't work for all of them (e.g. HP PA-RISC).
Switch to using the assembler's inbuilt macros rather than CPP, so that we
can use genuine newlines.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We use the .string pseudo-op both in some of our test assembly files
and in our -Oasm output. We expect this to emit a \0 terminated
string into the .o file. However for certain targets (e.g. HP
PA-RISC) it doesn't include the \0. Use .asciz instead, which
explicitly does what we want.
There's also one place we can use .ascii (which explicitly emits a
string *without* \0 termination) instead of multiple .byte directives.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
With -Wsign-compare, compilers warn about a mismatching signedness in
comparisons in various files in the tests/ directory.
For about half of the cases we can simply change the signed variable to
be of an unsigned type, because they will never need to store negative
values (which is the best fix of the problem).
In the remaining cases we can cast the signed variable to an unsigned
type, provided we know for sure it is not negative.
We see two different scenarios here:
- We either just explicitly checked for this variable to be positive
(if (rc < 0) FAIL();), or
- We rely on a function returning only positive values in the "length"
pointer if the function returned successfully: which we just checked.
At two occassions we compare with a constant "-1" (even though the
variable is unsigned), so we just change this to ~0U to create an
unsigned comparison value.
Since this is about the tests, let's also add explicit tests for those
values really not being negative.
This fixes "make tests" (but not "make check" yet), when compiled
with -Wsign-compare.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Message-Id: <20210618172030.9684-2-andre.przywara@arm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
With the prior commit, this check is now redundant.
Signed-off-by: Rob Herring <robh@kernel.org>
Message-Id: <20210526010335.860787-4-robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The root node is supposed to have an empty name, but at present this is
not checked. The behaviour of such a tree is not well defined. Most
software rightly assumes that the root node is at offset 0 and does not
check the name. This oddity was discovered as part of a security
investigation into U-Boot verified boot.
Add a check for this to fdt_check_full().
Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Arie Haenel <arie.haenel@intel.com>
Reported-by: Julien Lenoir <julien.lenoir@intel.com>
Message-Id: <20210323010410.3222701-2-sjg@chromium.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
At present it is possible to have two root nodes and even access nodes
in the 'second' root. Such trees should not be considered valid. This
was discovered as part of a security investigation into U-Boot verified
boot.
Add a check for this to fdt_check_full().
Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Arie Haenel <arie.haenel@intel.com>
Reported-by: Julien Lenoir <julien.lenoir@intel.com>
Message-Id: <20210323000926.3210733-1-sjg@chromium.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This test was accidentally skipped as the wrong test dts file was built.
The fragment numbering in this sugar-free test case needed adjusting to
match the numbering generated by dtc for overlay_overlay.dts.
Signed-off-by: Paul Barker <pbarker@konsulko.com>
Message-Id: <20201219143521.2118-1-pbarker@konsulko.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The meson build system allows projects to "vendor" dtc easily, thanks to
subproject(). QEMU has recently switched to meson, and adding meson
support to dtc will help to handle the QEMU submodule.
meson rules are arguably simpler to write and maintain than
the hand-crafted/custom Makefile. meson support various backends, and
default build options (including coverage, sanitizer, debug/release
etc, see: https://mesonbuild.com/Builtin-options.html)
Compare to the Makefiles, the same build targets should be built and
installed and the same tests should be run ("meson test" can be provided
extra test arguments for running the equivalent of checkm/checkv).
There is no support EXTRAVERSION/LOCAL_VERSION/CONFIG_LOCALVERSION,
instead the version is simply set with project(), and vcs_tag() is
used for git/dirty version reporting (This is most common and is
hopefully enough. If necessary, configure-time options could be added
for extra versioning.).
libfdt shared library is build following regular naming conventions:
instead of libfdt.so.1 -> libfdt-1.6.0.so (with current build-sys),
libfdt.so.1 -> libfdt.so.1.6.0. I am not sure why the current build
system use an uncommon naming pattern. I also included a libfdt.pc
pkg-config file, as convenience.
Both Linux native build and mingw cross-build pass. CI pass. Tests are
only run on native build.
The current Makefiles are left in-tree, and make/check still work.
Eventually, the Makefiles could be marked as deprecated, to start a
transition period and avoid having to maintain 2 build systems in the
near future.
(run_tests.sh could eventually be replaced by the meson test runner,
which would have several advantages in term of flexibility/features,
but this is left for another day)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20201012073405.1682782-3-marcandre.lureau@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
An interrupt provider (an actual interrupt-controller node or an
interrupt nexus) should have both #address-cells and #interrupt-cells
properties explicitly defined.
Add an extra test for this. We check for the #interrupt-cells property
already, but this does not cover every controller so far, only those that
get referenced by an interrupts property in some node. Also we miss
interrupt nexus nodes.
A missing #address-cells property is less critical, but creates
ambiguities when used in interrupt-map properties, so warn about this as
well now.
This removes the now redundant warning in the existing interrupts test.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Message-Id: <20200515141827.27957-2-andre.przywara@arm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently the test runner script always expects to be run from within the
tests/ subdirectory of a dtc source tree: it looks for dtc and other
binaries in the parent of the current directory and for the libfdt shared
library in ../libfdt.
That works great with make check and for testing a build you've just made.
However, sometimes it's useful to test a dtc & libfdt which have already
been installed on the system, or which for whatever reason are located
somewhere else.
This patch allows the test runner script to do this when TEST_BINDIR and/or
TEST_LIBDIR environment variables are set.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Support for YAML output in dtc is optional (to cover systems that don't
have libyaml). Currently the tests for yaml output test if the libyaml
package is locally installed.
That duplicates similar logic in the Makefile, and worse it will cause
failed tests if the user explicitly disables YAML support, rather than
simply not having libyaml installed.
Fix this by having the test script use the NO_YAML variable exported by
make. Fall back to the current test if the variable isn't set, such as
when running the script manually.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
One of our testcases creates a .bak file from invoking sed. Fix that to be
removed by make clean, and also ignore it in git to avoid clutter.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently the test script bases whether to run the Python tests on whether
it can see a built Python module. That can easily be fooled if there is
a stale module there.
Instead, have it actually look at the NO_PYTHON variable exported from the
Makefile. If the variable doesn't exist (such as if we're running the
script manually) fall back on the old logic.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Make automatically passes its variables through the environment, so
we don't need to explicitly copy this one into the test script.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently run_tests.sh needs the $PYTHON environment variable set to
correctly run pylibfdt tests. The Makefile does this for make check, but
it breaks if the script is run manually. Add a fallback to handle that
case.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Generalize the existing 'ranges' check to also work for 'dma-ranges'
which has the same parsing requirements.
Signed-off-by: Rob Herring <robh@kernel.org>
Message-Id: <20200303193931.1653-1-robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
By default FreeBSD does not have 'gcc' in the PATH (on common platforms).
As on Linux 'cc' is available as a link to the default compiler (Clang or
GCC), so just use 'cc'.
Signed-off-by: Ed Maste <emaste@freebsd.org>
Message-Id: <20191115155108.39488-1-emaste@freefall.freebsd.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If there is trailing zero, fdtget adds extra chacarter to the
property value. Thus comparing the expected with the actual
value, an error is emitted.
Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
Message-Id: <20191111080444.9819-3-stefan@olimex.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Python recently deprecated some test methods in favour of others. Adjust
the code to avoid warnings.
Signed-off-by: Simon Glass <sjg@chromium.org>
Message-Id: <20191113012410.62550-1-sjg@chromium.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
BSD sed requires that an extension is provided to the -i (in-place edit)
flag, which may immediately follow the -i or may be separated by a space -
sed -i .bak and sed -i.bak are equivalent. The extension is optional with
GNU sed, but if provided must immediately follow the -i. Thus, sed -i.bak
behaves identically with both GNU and BSD sed.
Signed-off-by: Ed Maste <emaste@freebsd.org>
Message-Id: <20191114203615.2866-1-emaste@freefall.freebsd.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This function should use a void * type, not char *. This causes an error:
TypeError: in method 'fdt_property_stub', argument 3 of type 'char const *'
Fix it and update the tests.
Signed-off-by: Simon Glass <sjg@chromium.org>
Message-Id: <20191025010226.34378-1-sjg@chromium.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Instead of outputing files to current directory, allow to specificy an
output directory. This helps with meson build system out-of-tree support.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20191009102025.10179-4-marcandre.lureau@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
c12b2b0c20 "libfdt: fdt_address_cells() and fdt_size_cells()" introduced
a bug as it consolidated code between the helpers for getting
#address-cells and #size-cells. Specifically #size-cells is allowed to
be 0, and is frequently found so in practice for /cpus. IEEE1275 only
requires implementations to handle 1..4 for #address-cells, although one
could make a case for #address-cells == #size-cells == 0 being used to
represent a bridge with a single port.
While we're there, it's not totally obvious that the existing implicit
cast of a u32 to int will give the correct results according to strict C,
although it does work in practice. Straighten that up to cast only after
we've made our range checks.
Reported-by: yonghuhaige via https://github.com/dgibson/dtc/issues/28
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Symbols from overlays are merged into the target tree, and are required to
have the form:
/fragment@XXX/__overlay__/...
If any symbols don't have this form, the overlay is rejected.
But there's not really anything wrong with an overlay having "local"
labels referring to a fragment node or some other metadata, that's not
expected to end up in a target tree.
So change our overlay application to simply ignore such symbols rather than
fail.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When applying overlays, we merge symbols from the overlay into the target
tree. At the moment the logic for this assumes all symbols in the overlay
are attached to a node of the form:
/fragment@XXX/__overlay__/relative/path
And will end up applied to the relative/path node under the fragment's
target.
However, this disallows the case of a symbol in the form just:
/fragment@XXX/__overlay__
This does have a pretty obvious sensible meaning: attach the new symbol
directly to the fragment's target, but we don't currently do that.
It's pretty easy to workaround this limitation in one's overlays, but it's
also easy to handle in the overlay applying code, so we might as well
extend it to cover this case.
Reported-by: Christophe Braillon
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add this into the class to simplify use of this function.
Signed-off-by: Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com>
Message-Id: <1562130487-27028-1-git-send-email-appana.durga.rao@xilinx.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This adds a test case to demonstrate some issue seen when applying
overlays using 'fdtoverlay'. It fails with FDT_ERR_NOSPACE:
- with long target path
- symbols in order to use these nodes in possible subsequent overlay.
This is seen with this patch, by running:
$ make check # Reports a failed test
$ ./fdtoverlay -i tests/overlay_base.test.dtb -o out.dtb \
tests/overlay_overlay_long_path.fdoverlay.test.dtb
Failed to apply tests/overlay_overlay_long_path.fdoverlay.test.dtb (-3)
This overlay fails to apply, because dtb size is close to modulo 1024
bytes chunk: utilfdt_read() -> utilfdt_read_err() -> bufsize = 1024.
As there is not much extra space in the blob to resolve symbols (long
target path), it fails with FDT_ERR_NOSPACE. In fdtoverlay, size is :
/* grow the blob to worst case */
blob_len = fdt_totalsize(blob) + total_len;
I can see assumption is made that result should be lower than:
- base fdt size + overlay size. Is there a simple way to find to know
what the final size is?
I'm not sure what the correct fix might be, for such (worst) case?
Similar issue is also seen in u-boot/common/image-fit.c that implements
similar approach (e.g. base fdt size + overlay size).
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Message-Id: <1538553302-1353-1-git-send-email-fabrice.gasnier@st.com>
[dwg: To avoid breaking bisection, I committed this after a fix, so
the "failed" description is no longer accurate]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Replace instances in tests of mostly LGPL-2.1 license boilerplate
with SPDX tags.
Signed-off-by: Rob Herring <robh@kernel.org>
Message-Id: <20190620211944.9378-5-robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The typos have been discovered with the "codespell" utility.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190520081209.20415-1-thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Searching for duplicate names scales O(n^2) with the number of names
added to a fdt, which can cause a noticable slowdown with larger device
trees and very slow CPU cores.
Add FDT_CREATE_FLAG_NO_NAME_DEDUP that allow the caller to trade fdt size
for speed in the creation process.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20190509094122.834-4-npiggin@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If fdt_add_property or fdt_property_placeholder fail after allocating
a string for the name, they return without freeing that string. This
does not change the structure of the tree, but in very specific cases
it could lead to undesirable space consumption.
Fix this by rolling back the string allocation in this situation.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20190509094122.834-2-npiggin@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently the libfdt based tools (fdtput, fdtget, etc.) and all the
test binaries using libfdt are linked against the static version of libfdt.
That's made it very easy in the past to forget to properly update the
version.lds file which is needed to make functions publicaly accessible
from the shared library.
To avoid problems like that in future, alter the build so that we link and
run the tests against the shared library version of libfdt.
That immediately points out several important symbols that are still
missing from the version.lds, so fix those as well.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
tests.sh has a bunch of shell setup that's sourced in a number of other
scripts. It _doesn't_ actually run a bunch of tests, which is kind of what
the name suggests. So rename it to be more obvious.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The new fdt_generate_phandle() function can be used to generate a new,
unused phandle given a specific device tree blob. The implementation is
somewhat naive in that it simply walks the entire device tree to find
the highest phandle value and then returns a phandle value one higher
than that. A more clever implementation might try to find holes in the
current set of phandle values and fill them. But this implementation is
relatively simple and works reliably.
Also add a test that validates that phandles generated by this new API
are indeed unique.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Message-Id: <20190326153302.17109-3-thierry.reding@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The fdt_get_max_phandle() function has some shortcomings. On one hand
it returns just a uint32_t which means to check for the "negative"
error code a caller has to explicitly check against the error code
(uint32_t)-1. In addition, the -1 is the only error code that can be
returned, so a caller cannot tell the difference between the various
failures.
Fix this by adding a new fdt_find_max_phandle() function that returns an
error code on failure and 0 on success, just like other APIs, and stores
the maximum phandle value in an output argument on success.
This also refactors fdt_get_max_phandle() to use the new function. Add a
note pointing out that the new fdt_find_max_phandle() function should be
preferred over fdt_get_max_phandle().
Signed-off-by: Thierry Reding <treding@nvidia.com>
Message-Id: <20190326153302.17109-1-thierry.reding@gmail.com>
[dwg: Reword for some inaccuracies in the commit message]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This function will append an address range property using parent node's
"#address-cells" and "#size-cells" properties.
It will be used in implementing kdump with kexec_file_load system call
at linux kernel for arm64 once it is merged into kernel tree.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Message-Id: <20190327061552.17170-2-takahiro.akashi@linaro.org>
[dwg: Correct a SEGV error in the testcase]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The new fdt_generate_phandle() function can be used to generate a new,
unused phandle given a specific device tree blob. The implementation is
somewhat naive in that it simply walks the entire device tree to find
the highest phandle value and then returns a phandle value one higher
than that. A more clever implementation might try to find holes in the
current set of phandle values and fill them. But this implementation is
relatively simple and works reliably.
Also add a test that validates that phandles generated by this new API
are indeed unique.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Message-Id: <20190320151003.28941-1-thierry.reding@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Python 3 C extensions have suffix containing platform, Python version
and another details in the name so the condition has to be extended.
Signed-off-by: Lumir Balhar <lbalhar@redhat.com>
Message-Id: <20190218164856.23861-5-frenzy@frenzy.cz>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When some warning appears in test result, "ok" is still
at the end of the line but without three dots.
Signed-off-by: Lumir Balhar <lbalhar@redhat.com>
Message-Id: <20190218164856.23861-4-frenzy@frenzy.cz>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Petr Viktorin <pviktori@redhat.com>
Message-Id: <20190218164856.23861-3-frenzy@frenzy.cz>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This function does not have its own test at present. Add one.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Rob Herring