Add checks to identify simple-bus bus types and checks for child
devices. Simple-bus type is generally identified by "simple-bus"
compatible string. We also treat the root as a simple-bus, but only for
child nodes with reg property.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add PCI bridge and device node checks. We identify PCI bridges with
'device_type = "pci"' as only PCI bridges should set that property. For
bridges, check that node name is pci or pcie, ranges and bus-range are
present, and #address-cells and #size-cells are correct.
For devices, check the reg property fields are correct for the first
element (the config address). Check that the unit address is formatted
corectly based on the reg property. Device unit addresses are in the
form DD or DD,F where DD is the device 0-0x1f and F is the function 0-7.
Also, check that the bus number is within the expected range defined by
bridge's bus-ranges.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Rob Herring <robh@kernel.org>
[dwg: Added a missing check dependency]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When clang checks the documentation tags (with -Wdocumentation flag), it
reports the following warning:
fdtput.c:70:11: error: parameter '*value_len' not found in the
function declaration [-Werror,-Wdocumentation]
* @param *value_len Returns length of value encoded
^~~~~~~~~~
fdtput.c:70:11: note: did you mean 'value_len'?
* @param *value_len Returns length of value encoded
^~~~~~~~~~
value_len
As this sounds reasonable, remove the star from the documentation tag.
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This bug has been found by using clang Static Analyzer: it reported that
the value stored to fdt was never read.
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
overlay_update_local_node_references() saves the result of
fdt_subnode_offset() into variable tree_child but checks for variable
ret afterwards. As this does not make sense, check tree_child instead of
ret.
This bug has been found by compiling with clang. The compiler reported
the following warning:
libfdt/fdt_overlay.c:275:7: error: variable 'ret' may be
uninitialized when used here
[-Werror,-Wconditional-uninitialized]
if (ret == -FDT_ERR_NOTFOUND)
^~~
libfdt/fdt_overlay.c:210:9: note: initialize the variable 'ret' to
silence this
warning
int ret;
^
= 0
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Using %.*s format helps making asm_emit_string() not modify its "str"
parameter.
While at it, constify the "str" parameter of bin_emit_string() and
asm_emit_string(), as these function no longer modify it.
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The default libfdt_env.h (for POSIXish userland builds) supports sparse
checking. It has a couple of helper macros, __force and __bitwise which
expand the relevant sparse attributes to enable checking for incorrect
or missing endian conversions.
Those are bad names: for one, leading underscores are supposed to be
reserved for the system libraries, and worse, some systems (including
RHEL7) do define those names already.
So change them to FDT_FORCE and FDT_BITWISE which are far less likely to
have collisions.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This fixes a great many sparse warnings on the fdt and libfdt sources.
These are mostly due to incorrect mixing of endian annotated and native
integer types.
This includes fixing a couple of quasi-bugs where we had endian conversions
the wrong way around (this will have the right effect in practice, but is
certainly conceptually incorrect).
This doesn't make the whole tree sparse clean: there are many warnings in
bison and lex generated code, and there are a handful of other remaining
warnings that are (for now) more trouble than they're worth to fix (and
are not genuine bugs).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We have a number of explicit __GNUC__ conditionals to tell if we want to
use some gcc extensions for extra warnings. This cleans this up to use
a single conditional, defining convenience macros for those attributes.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
struct fdt_reserve_entry is defined in fdt.h to exactly mirror the
in-memory layout of a reserve entry in the flattened tree. Since that is
always big-endian, it uses fdt64_t elements, which have sparse annotations
marking them as not native endian.
However, in dtc, we also use struct fdt_reserve_entry inside struct
reserve_info, and use it with native endian values. This will cause sparse
errors.
This stops this abuse, making struct reserve_info have its own native
endian fields for the same information.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When compiling with gcc, we already include the attribute on check_msg()
to give compiler warnings about mismatches between printf() like format
strings and the corresponding arguments. This patch adds similar
attributes for lexical_error() and die().
Suggested-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Fix two places where a printf()-style format string does not match the
arguments passed.
Reported-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Device trees can contain empty (zero length) properties, which are often
used as boolean flags. These can already be created using fdt_setprop()
passing a length of zero and a pointer which is ignored. It is safe to
pass NULL, but that may not be obvious from the interface. To make it
clearer, add an fdt_setprop_empty() helper macro.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The standard way of setting an empty property using libfdt is:
fdt_setprop(fdt, nodeoffset, propname, NULL, 0);
However, the implementation of this includes an unconditional:
memcpy(prop->data, NULL, 0);
Which although it will be a no-op (which is what we want) on many platforms
is technically undefined behaviour. Correct this, so that when passing
a 0 length, passing a NULL pointer as the value to fdt_setprop() is
definitely safe. This should quiet static checkers which complain about
this.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
For example:
src/arm/at91-ariag25.dtb: Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name
If output is to stdout then the prefix is "<stdout>: ".
This helps to direct the developer to where to look when multiple files are
being compiled in parallel.
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
dtc defines a streq() (string equality) macro to avoid the easy confusion
of the sense of strcmp() comparison for equality. A few places where we
don't use it have slipped in, so remove them.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
While '#', '?', '.', '+', '*', and '_' are considered valid characters,
their use is discouraged in recommended practices.
Testing this found a few cases of '.'. The majority of the warnings were
all from underscores.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
While '?', '.', '+', '*', and '_' are considered valid characters their
use is discouraged in recommended practices. '#' is also only
recommended to be used at the beginning of property names.
Testing this found one typo error with '.' used instead of ','. The
rest of the warnings were all from underscores.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
None of the callers ever pass a NULL to srcpos_string(), so the check
for it is not necessary. Furthermore, checking it make Coverity complain
about the raw dereferences which follow later in the function.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If we have a construct like this:
label: &handle {
...
};
Running dtc on it will cause a segfault, because we use 'target'
when it could be NULL. Move the add_label() call into the if
statement to fix this potentially bad use of a NULL pointer.
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It's useful to have some tags to jump around sources. We don't
include test sources in the toplevel Makefile because they
probably aren't useful to main program development.
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Running fdtdump without scan mode for an invalid file often
results in a segmentation fault because the fdt header is
not checked.
With the patch the header is checked both in scanning as
well as in non-scanning mode.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[dwg: Removed unnecessary inline, changed type from int to bool]
Reviewed-by: Simon Glass <sjg@chromium.org>
The data struct used for parsing character literals was never freed
resulting in a few bytes leaked for every character.
Signed-off-by: Gabriel Smith <ga29smith@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
struct boot_info is named that for historical reasons, and isn't
particularly meaningful. Essentially it contains all the information -
in "live" form from a single dts or dtb file. As we move towards support
for dynamic dt overlays, that name will become increasingly bad.
So, in preparation, rename it to dt_info. At the same time rename the
'the_boot_info' global to 'parser_output' since that's its actual purpose.
Unfortunately we do need the global unless we switch to bison's re-entrant
parser extensions, which would introduce its own complications.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
First remove the non-terminal name 'versioninfo' - /plugin/ doesn't really
indicate a "version" per se, and version could be confused with the dtb
output version.
Second allow the /dts-v1/; /plugin/; sequence to be repeated, for easier
use of include files - but ensure that all copies match, so you can't
include a file declaring /plugin/ in one that doesn't, or vice versa.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
At the moment we generate a __symbols__ node if -@ is specified OR if the
dts has the /plugin/ tag. That difference in behaviour from handling base
trees is unnecessary and slightly confusing. It also means it's impossible
to create a plugin without symbols. Since symbols in a plugin are only
useful in the case of stacked plugins - and libfdt doesn't even support
merging plugin symbols as part of overlay application yet - that's a thing
that might be useful.
So make __symbols__ generation depend only on -@. We also remove remove
the testcases that checked explicitly for this not very useful behaviour.
Instead we don't use -@ for our basic overlay testcase, and check that
symbols are not generated.
At some point in the future we should add support for symbol merging to
libfdt and add testcases for stacked overlay application.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Using -@ again here obscures what's going on, because at the end we can't
know which run actually generated the symbols node. We should just
generate the symbols on the first run and leave it at that.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
I think these were for an additional command line option which got dropped
during development. At this point all they're testing is that fixups don't
get generated for a non /plugin/ tree, which is already tested with one of
the simpler cases previously.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This changes the names of the testfiles for a number of the testcases of
the dtc overlay generation functionality to make them shorter and a bit
cleaerer what's going on. In addition we move some of the check_path
sanity checks closer to the dtc commands they verify.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
At the moment we have some rudimentary tests of the fdt_overlay_apply()
function which don't rely on overlay generation support in dtc. This is
done by avoiding any external references in the sample overlay, in
particularly using the 'target-path' syntax instead of 'target' to avoid
needing external references in the fragment targets. Thus this test case
doesn't exercise libfdt's processing of the __fixups__ node at all.
We do test that somewhat in combination with dtc's overlay support.
However, in the interests of being able to quickly determine which side a
bug is on, it would be nice to exercise this without requiring the dtc
support.
This adds testcases to do so, by making some examples with manually
constructed __symbols__ and __fixups__ nodes. In addition we rename some
of the test data files and add some extra check_path tests to make it a bit
clearer what's going on here.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The fdt_overlay_apply() function purports to support the edge cases where
an overlay has no fixups to be applied, or a base tree which has no
symbols (the latter can only work if the former is also true). However it
gets it wrong in a couple of small ways:
* In the no fixups case, it doesn't fail immediately, but will attempt
fdt_for_each_property_offset() giving -FDT_ERR_NOTFOUND as the node
offset, which will fail. Instead it should succeed immediately, since
there's nothing to do.
* In the case of no symbols, it again doesn't fail immediately. However
if there is an actual fixup it will fail with an unexpected error,
because -FDT_ERR_NOTFOUND is passed to fdt_getprop() when attempting to
look up the symbols. We should instead return -FDT_ERR_NOTFOUND
directly.
Both of these errors lead to the code returning misleading error codes in
failing cases.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Two test programs - check_path and overlay - define a CHECK() helper macro
in such a way that in the case of an error it will re-execute the checked
code fragment, instead of using the return value from the initial call.
This can lead to misreporting errors, because the code may fail in a
different way the second time around due to changes made during the first
failing call.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The various tests for overlay/plugin support are currently lumped together
in the overlay_tests shell function, which is executed by libfdt_tests.
However, this includes both tests designed primarily to exercise libfdt's
overlay application, and tests designed to exercise dtc's overlay
generation. Split these up for improved clarity.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The current testcases for the -A "auto alias generation" option operate on
a "plugin" tree. Although not technically wrong, this is an odd approach,
since a plugin will almost certainly need the __symbols__ and/or __fixups__
syntax instead of aliases. On the other hand -A may be useful simply for
generating aliases on a tree which is not using the overlay / plugin
mechanism at all.
Therefore change the tests to operate on a base tree example instead of a
plugin.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When overlay apply supprt was added to libfdt the testcases included some
which could only be executed with the (then) out of tree dtc with overlay
output support. So, the test script automatically skipped those tests if
it wasn't available.
Now that the overlay support is merged into dtc mainline there's no reason
to keep this logic. Instead run all the overlay tests unconditionally.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add a number of tests for dynamic objects/overlays.
Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add a test that checks for existence or not of a node.
It is useful for testing the various cases when generating
symbols and fixups for dynamic device tree objects.
Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch enable the generation of symbols & local fixup information
for trees compiled with the -@ (--symbols) option.
Using this patch labels in the tree and their users emit information
in __symbols__ and __local_fixups__ nodes.
The __fixups__ node make possible the dynamic resolution of phandle
references which are present in the plugin tree but lie in the
tree that are applying the overlay against.
Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Provides the document explaining the internal mechanics of
plugins and options.
Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
As preparation for overlay support we need to pass the boot info
parameter instead of the root node to each check method.
The root node can be retrieved by accessing boot info's dt member.
No other functional changes are made.
Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Some error values were missing from the table which meant that they could
not be translated by fdt_strerror().
Signed-off-by: Benjamin Fair <b-fair@ti.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If fdt_getprop() fails, negative error code should be returned.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If fdt_getprop() fails, negative error code should be returned.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Rename the blobs to have a more explicit output that will give us a clearer
idea about whether a DT (and the test) has been compiled using a dtc with
our without overlays support.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The compiled blobs in the overlay tests do not have the test suffix which
is usually used to clean up and ignore the test artifacts.
Let's add that suffix.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Rob Herring