|
|
DRACUT.CMDLINE(7) |
|
|
================= |
|
|
:doctype: manpage |
|
|
:man source: dracut |
|
|
:man manual: dracut |
|
|
|
|
|
NAME |
|
|
---- |
|
|
dracut.cmdline - dracut kernel command line options |
|
|
|
|
|
DESCRIPTION |
|
|
----------- |
|
|
The root device used by the kernel is specified in the boot configuration |
|
|
file on the kernel command line, as always. |
|
|
|
|
|
The traditional _root=/dev/sda1_ style device specification is allowed, but not |
|
|
encouraged. The root device should better be identified by LABEL or UUID. If a |
|
|
label is used, as in _root=LABEL=<label_of_root>_ the initramfs will search all |
|
|
available devices for a filesystem with the appropriate label, and mount that |
|
|
device as the root filesystem. _root=UUID=<uuidnumber>_ will mount the partition |
|
|
with that UUID as the root filesystem. |
|
|
|
|
|
In the following all kernel command line parameters, which are processed by |
|
|
dracut, are described. |
|
|
|
|
|
"rd.*" parameters mentioned without "=" are boolean parameters. They can be |
|
|
turned on/off by setting them to {0|1}. If the assignment with "=" is missing |
|
|
"=1" is implied. For example _rd.info_ can be turned off with _rd.info=0_ or |
|
|
turned on with _rd.info=1_ or _rd.info_. The last value in the kernel command |
|
|
line is the value, which is honored. |
|
|
|
|
|
Standard |
|
|
~~~~~~~~ |
|
|
**init=**__<path to real init>__:: |
|
|
specify the path to the init programm to be started after the initramfs has |
|
|
finished |
|
|
|
|
|
**root=**__<path to blockdevice>__:: |
|
|
specify the block device to use as the root filesystem. |
|
|
+ |
|
|
[listing] |
|
|
.Example |
|
|
-- |
|
|
root=/dev/sda1 |
|
|
root=/dev/disk/by-path/pci-0000:00:1f.1-scsi-0:0:1:0-part1 |
|
|
root=/dev/disk/by-label/Root |
|
|
root=LABEL=Root |
|
|
root=/dev/disk/by-uuid/3f5ad593-4546-4a94-a374-bcfb68aa11f7 |
|
|
root=UUID=3f5ad593-4546-4a94-a374-bcfb68aa11f7 |
|
|
root=PARTUUID=3f5ad593-4546-4a94-a374-bcfb68aa11f7 |
|
|
-- |
|
|
|
|
|
**rootfstype=**__<filesystem type>__:: "auto" if not specified. |
|
|
+ |
|
|
[listing] |
|
|
.Example |
|
|
-- |
|
|
rootfstype=ext3 |
|
|
-- |
|
|
|
|
|
**rootflags=**__<mount options>__:: |
|
|
specify additional mount options for the root filesystem. If not set, |
|
|
_/etc/fstab_ of the real root will be parsed for special mount options and |
|
|
mounted accordingly. |
|
|
|
|
|
**ro**:: |
|
|
force mounting _/_ and _/usr_ (if it is a separate device) read-only. If |
|
|
none of ro and rw is present, both are mounted according to _/etc/fstab_. |
|
|
|
|
|
**rw**:: |
|
|
force mounting _/_ and _/usr_ (if it is a separate device) read-write. |
|
|
See also ro option. |
|
|
|
|
|
**rootfallback=**__<path to blockdevice>__:: |
|
|
specify the block device to use as the root filesystem, if the normal root |
|
|
cannot be found. This can only be a simple block device with a simple file |
|
|
system, for which the filesystem driver is either compiled in, or added |
|
|
manually to the initramfs. This parameter can be specified multiple times. |
|
|
|
|
|
**rd.auto** **rd.auto=1**:: |
|
|
enable autoassembly of special devices like cryptoLUKS, dmraid, mdraid or |
|
|
lvm. Default is off as of dracut version >= 024. |
|
|
|
|
|
**rd.hostonly=0**:: |
|
|
removes all compiled in configuration of the host system the initramfs image |
|
|
was built on. This helps booting, if any disk layout changed, especially in |
|
|
combination with rd.auto or other parameters specifying the layout. |
|
|
|
|
|
**rd.cmdline=ask**:: |
|
|
prompts the user for additional kernel command line parameters |
|
|
|
|
|
**rd.fstab=0**:: |
|
|
do not honor special mount options for the root filesystem found in |
|
|
_/etc/fstab_ of the real root. |
|
|
|
|
|
**resume=**__<path to resume partition>__:: |
|
|
resume from a swap partition |
|
|
+ |
|
|
[listing] |
|
|
.Example |
|
|
-- |
|
|
resume=/dev/disk/by-path/pci-0000:00:1f.1-scsi-0:0:1:0-part1 |
|
|
resume=/dev/disk/by-uuid/3f5ad593-4546-4a94-a374-bcfb68aa11f7 |
|
|
resume=UUID=3f5ad593-4546-4a94-a374-bcfb68aa11f7 |
|
|
-- |
|
|
|
|
|
**rd.skipfsck**:: |
|
|
skip fsck for rootfs and _/usr_. If you're mounting _/usr_ read-only and |
|
|
the init system performs fsck before remount, you might want to use this |
|
|
option to avoid duplication. |
|
|
|
|
|
iso-scan/filename |
|
|
~~~~~~~~~~~~~~~~~ |
|
|
|
|
|
Using iso-scan/filename with a Fedora/Red Hat/CentOS Live iso should just work |
|
|
by copying the original kernel cmdline parameters. |
|
|
|
|
|
[listing] |
|
|
.Example |
|
|
-- |
|
|
menuentry 'Live Fedora 20' --class fedora --class gnu-linux --class gnu --class os { |
|
|
set isolabel=Fedora-Live-LXDE-x86_64-20-1 |
|
|
set isofile="/boot/iso/Fedora-Live-LXDE-x86_64-20-1.iso" |
|
|
loopback loop $isofile |
|
|
linux (loop)/isolinux/vmlinuz0 boot=isolinux iso-scan/filename=$isofile root=live:LABEL=$isolabel ro rd.live.image quiet rhgb |
|
|
initrd (loop)/isolinux/initrd0.img |
|
|
} |
|
|
-- |
|
|
|
|
|
Misc |
|
|
~~~~ |
|
|
**rd.driver.blacklist=**__<drivername>__[,__<drivername>__,...]:: |
|
|
do not load kernel module <drivername>. This parameter can be specified |
|
|
multiple times. |
|
|
|
|
|
**rd.driver.pre=**__<drivername>__[,__<drivername>__,...]:: |
|
|
force loading kernel module <drivername>. This parameter can be specified |
|
|
multiple times. |
|
|
|
|
|
**rd.driver.post=**__<drivername>__[,__<drivername>__,...]:: |
|
|
force loading kernel module <drivername> after all automatic loading modules |
|
|
have been loaded. This parameter can be specified multiple times. |
|
|
|
|
|
**rd.retry=**__<seconds>__:: |
|
|
specify how long dracut should retry the initqueue to configure devices. |
|
|
The default is 30 seconds. After 2/3 of the time, degraded raids are force |
|
|
started. If you have hardware, which takes a very long time to announce its |
|
|
drives, you might want to extend this value. |
|
|
|
|
|
**rd.timeout=**__<seconds>__:: |
|
|
specify how long dracut should wait for devices to appear. The |
|
|
default is '0', which means 'forever'. Note that this timeout |
|
|
should be longer than rd.retry to allow for proper configuration. |
|
|
|
|
|
**rd.noverifyssl**:: |
|
|
accept self-signed certificates for ssl downloads. |
|
|
|
|
|
**rd.ctty=**__<terminal device>__:: |
|
|
specify the controlling terminal for the console. |
|
|
This is useful, if you have multiple "console=" arguments. |
|
|
|
|
|
[[dracutkerneldebug]] |
|
|
Debug |
|
|
~~~~~ |
|
|
If you are dropped to an emergency shell, the file |
|
|
_/run/initramfs/rdsosreport.txt_ is created, which can be saved to a (to be |
|
|
mounted by hand) partition (usually /boot) or a USB stick. Additional debugging |
|
|
info can be produced by adding **rd.debug** to the kernel command line. |
|
|
_/run/initramfs/rdsosreport.txt_ contains all logs and the output of some tools. |
|
|
It should be attached to any report about dracut problems. |
|
|
|
|
|
**rd.info**:: |
|
|
print informational output though "quiet" is set |
|
|
|
|
|
**rd.shell**:: |
|
|
allow dropping to a shell, if root mounting fails |
|
|
|
|
|
**rd.debug**:: |
|
|
set -x for the dracut shell. |
|
|
If systemd is active in the initramfs, all output is logged to the systemd |
|
|
journal, which you can inspect with "journalctl -ab". |
|
|
If systemd is not active, the logs are written to dmesg and |
|
|
_/run/initramfs/init.log_. |
|
|
If "quiet" is set, it also logs to the console. |
|
|
|
|
|
**rd.memdebug=[0-3]**:: |
|
|
Print memory usage info at various points, set the verbose level from 0 to 3. |
|
|
+ |
|
|
Higher level means more debugging output: |
|
|
+ |
|
|
---- |
|
|
0 - no output |
|
|
1 - partial /proc/meminfo |
|
|
2 - /proc/meminfo |
|
|
3 - /proc/meminfo + /proc/slabinfo |
|
|
---- |
|
|
|
|
|
**rd.break**:: |
|
|
drop to a shell at the end |
|
|
|
|
|
**rd.break=**__{cmdline|pre-udev|pre-trigger|initqueue|pre-mount|mount|pre-pivot|cleanup}__:: |
|
|
drop to a shell on defined breakpoint |
|
|
|
|
|
**rd.udev.info**:: |
|
|
set udev to loglevel info |
|
|
|
|
|
**rd.udev.debug**:: |
|
|
set udev to loglevel debug |
|
|
|
|
|
I18N |
|
|
~~~~ |
|
|
**rd.vconsole.keymap=**__<keymap base file name>__:: |
|
|
keyboard translation table loaded by loadkeys; taken from keymaps directory; |
|
|
will be written as KEYMAP to _/etc/vconsole.conf_ in the initramfs. |
|
|
+ |
|
|
[listing] |
|
|
.Example |
|
|
-- |
|
|
rd.vconsole.keymap=de-latin1-nodeadkeys |
|
|
-- |
|
|
|
|
|
**rd.vconsole.keymap.ext=**__<list of keymap base file names>__:: |
|
|
list of extra keymaps to bo loaded (sep. by space); will be written as |
|
|
EXT_KEYMAP to _/etc/vconsole.conf_ in the initramfs |
|
|
|
|
|
**rd.vconsole.unicode**:: |
|
|
boolean, indicating UTF-8 mode; will be written as UNICODE to |
|
|
_/etc/vconsole.conf_ in the initramfs |
|
|
|
|
|
**rd.vconsole.font=**__<font base file name>__:: |
|
|
console font; taken from consolefonts directory; will be written as FONT to |
|
|
_/etc/vconsole.conf_ in the initramfs. |
|
|
+ |
|
|
[listing] |
|
|
.Example |
|
|
-- |
|
|
rd.vconsole.font=LatArCyrHeb-16 |
|
|
-- |
|
|
|
|
|
**rd.vconsole.font.map=**__<console map base file name>__:: |
|
|
see description of '-m' parameter in setfont manual; taken from consoletrans |
|
|
directory; will be written as FONT_MAP to _/etc/vconsole.conf_ in the |
|
|
initramfs |
|
|
|
|
|
**rd.vconsole.font.unimap=**__<unicode table base file name>__:: |
|
|
see description of '-u' parameter in setfont manual; taken from unimaps |
|
|
directory; will be written as FONT_UNIMAP to _/etc/vconsole.conf_ in the |
|
|
initramfs |
|
|
|
|
|
**rd.locale.LANG=**__<locale>__:: |
|
|
taken from the environment; if no UNICODE is defined we set its value in |
|
|
basis of LANG value (whether it ends with ".utf8" (or similar) or not); will |
|
|
be written as LANG to _/etc/locale.conf_ in the initramfs. |
|
|
+ |
|
|
[listing] |
|
|
.Example |
|
|
-- |
|
|
rd.locale.LANG=pl_PL.utf8 |
|
|
-- |
|
|
|
|
|
**rd.locale.LC_ALL=**__<locale>__:: |
|
|
taken from the environment; will be written as LC_ALL to _/etc/locale.conf_ |
|
|
in the initramfs |
|
|
|
|
|
LVM |
|
|
~~~ |
|
|
**rd.lvm=0**:: |
|
|
disable LVM detection |
|
|
|
|
|
**rd.lvm.vg=**__<volume group name>__:: |
|
|
only activate the volume groups with the given name. rd.lvm.vg can be |
|
|
specified multiple times on the kernel command line. |
|
|
|
|
|
**rd.lvm.lv=**__<logical volume name>__:: |
|
|
only activate the logical volumes with the given name. rd.lvm.lv can be |
|
|
specified multiple times on the kernel command line. |
|
|
|
|
|
**rd.lvm.conf=0**:: |
|
|
remove any _/etc/lvm/lvm.conf_, which may exist in the initramfs |
|
|
|
|
|
crypto LUKS |
|
|
~~~~~~~~~~~ |
|
|
**rd.luks=0**:: |
|
|
disable crypto LUKS detection |
|
|
|
|
|
**rd.luks.uuid=**__<luks uuid>__:: |
|
|
only activate the LUKS partitions with the given UUID. Any "luks-" of the |
|
|
LUKS UUID is removed before comparing to _<luks uuid>_. |
|
|
The comparisons also matches, if _<luks uuid>_ is only the beginning of the |
|
|
LUKS UUID, so you don't have to specify the full UUID. |
|
|
This parameter can be specified multiple times. |
|
|
|
|
|
**rd.luks.allow-discards=**__<luks uuid>__:: |
|
|
Allow using of discards (TRIM) requests for LUKS partitions with the given |
|
|
UUID. Any "luks-" of the LUKS UUID is removed before comparing to |
|
|
_<luks uuid>_. The comparisons also matches, if _<luks uuid>_ is only the |
|
|
beginning of the LUKS UUID, so you don't have to specify the full UUID. |
|
|
This parameter can be specified multiple times. |
|
|
|
|
|
**rd.luks.allow-discards**:: |
|
|
Allow using of discards (TRIM) requests on all LUKS partitions. |
|
|
|
|
|
**rd.luks.crypttab=0**:: |
|
|
do not check, if LUKS partition is in _/etc/crypttab_ |
|
|
|
|
|
crypto LUKS - key on removable device support |
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
|
|
**rd.luks.key=**__<keypath>__:__<keydev>__:__<luksdev>__:: |
|
|
_keypath_ is a path to key file to look for. It's REQUIRED. When _keypath_ |
|
|
ends with '.gpg' it's considered to be key encrypted symmetrically with GPG. |
|
|
You will be prompted for password on boot. GPG support comes with |
|
|
'crypt-gpg' module which needs to be added explicitly. |
|
|
+ |
|
|
_keydev_ is a device on which key file resides. It might be kernel name of |
|
|
devices (should start with "/dev/"), UUID (prefixed with "UUID=") or label |
|
|
(prefix with "LABEL="). You don't have to specify full UUID. Just its beginning |
|
|
will suffice, even if its ambiguous. All matching devices will be probed. |
|
|
This parameter is recommended, but not required. If not present, all block |
|
|
devices will be probed, which may significantly increase boot time. |
|
|
+ |
|
|
If _luksdev_ is given, the specified key will only be applied for that LUKS |
|
|
device. Possible values are the same as for _keydev_. Unless you have several |
|
|
LUKS devices, you don't have to specify this parameter. The simplest usage is: |
|
|
+ |
|
|
[listing] |
|
|
.Example |
|
|
-- |
|
|
rd.luks.key=/foo/bar.key |
|
|
-- |
|
|
+ |
|
|
As you see, you can skip colons in such a case. |
|
|
+ |
|
|
[NOTE] |
|
|
=============================== |
|
|
dracut pipes key to cryptsetup with _-d -_ argument, therefore you need to pipe |
|
|
to crypsetup luksFormat with _-d -_, too! |
|
|
|
|
|
Here follows example for key encrypted with GPG: |
|
|
|
|
|
[listing] |
|
|
-- |
|
|
gpg --quiet --decrypt rootkey.gpg | \ |
|
|
cryptsetup -d - -v --cipher serpent-cbc-essiv:sha256 \ |
|
|
--key-size 256 luksFormat /dev/sda3 |
|
|
-- |
|
|
|
|
|
If you use plain keys, just add path to _-d_ option: |
|
|
|
|
|
[listing] |
|
|
-- |
|
|
cryptsetup -d rootkey.key -v --cipher serpent-cbc-essiv:sha256 \ |
|
|
--key-size 256 luksFormat /dev/sda3 |
|
|
-- |
|
|
=============================== |
|
|
|
|
|
MD RAID |
|
|
~~~~~~~ |
|
|
**rd.md=0**:: |
|
|
disable MD RAID detection |
|
|
|
|
|
**rd.md.imsm=0**:: |
|
|
disable MD RAID for imsm/isw raids, use DM RAID instead |
|
|
|
|
|
**rd.md.ddf=0**:: |
|
|
disable MD RAID for SNIA ddf raids, use DM RAID instead |
|
|
|
|
|
**rd.md.conf=0**:: |
|
|
ignore mdadm.conf included in initramfs |
|
|
|
|
|
**rd.md.waitclean=1**:: |
|
|
wait for any resync, recovery, or reshape activity to finish before |
|
|
continuing |
|
|
|
|
|
**rd.md.uuid=**__<md raid uuid>__:: |
|
|
only activate the raid sets with the given UUID. This parameter can be |
|
|
specified multiple times. |
|
|
|
|
|
DM RAID |
|
|
~~~~~~~ |
|
|
**rd.dm=0**:: |
|
|
disable DM RAID detection |
|
|
|
|
|
**rd.dm.uuid=**__<dm raid uuid>__:: |
|
|
only activate the raid sets with the given UUID. This parameter can be |
|
|
specified multiple times. |
|
|
|
|
|
MULTIPATH |
|
|
~~~~~~~~~ |
|
|
**rd.multipath=0**:: |
|
|
disable multipath detection |
|
|
|
|
|
FIPS |
|
|
~~~~ |
|
|
**rd.fips**:: |
|
|
enable FIPS |
|
|
|
|
|
**boot=**__<boot device>__:: |
|
|
specify the device, where /boot is located. |
|
|
+ |
|
|
[listing] |
|
|
.Example |
|
|
-- |
|
|
boot=/dev/sda1 |
|
|
boot=/dev/disk/by-path/pci-0000:00:1f.1-scsi-0:0:1:0-part1 |
|
|
boot=UUID=<uuid> |
|
|
boot=LABEL=<label> |
|
|
-- |
|
|
|
|
|
**rd.fips.skipkernel**:: |
|
|
skip checksum check of the kernel image. Useful, if the kernel image is not |
|
|
in a separate boot partition. |
|
|
|
|
|
Network |
|
|
~~~~~~~ |
|
|
|
|
|
[IMPORTANT] |
|
|
===================== |
|
|
It is recommended to either bind an interface to a MAC with the **ifname** |
|
|
argument, or to use the systemd-udevd predictable network interface names. |
|
|
|
|
|
Predictable network interface device names based on: |
|
|
|
|
|
- firmware/bios-provided index numbers for on-board devices |
|
|
- firmware-provided pci-express hotplug slot index number |
|
|
- physical/geographical location of the hardware |
|
|
- the interface's MAC address |
|
|
|
|
|
See: |
|
|
http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames |
|
|
|
|
|
Two character prefixes based on the type of interface: |
|
|
|
|
|
en:: ethernet |
|
|
wl:: wlan |
|
|
ww:: wwan |
|
|
|
|
|
Type of names: |
|
|
|
|
|
o<index>:: on-board device index number |
|
|
s<slot>[f<function>][d<dev_id>]:: hotplug slot index number |
|
|
x<MAC>:: MAC address |
|
|
[P<domain>]p<bus>s<slot>[f<function>][d<dev_id>]:: PCI geographical location |
|
|
[P<domain>]p<bus>s<slot>[f<function>][u<port>][..][c<config>][i<interface>]:: USB port number chain |
|
|
|
|
|
All multi-function PCI devices will carry the [f<function>] number in the |
|
|
device name, including the function 0 device. |
|
|
|
|
|
When using PCI geography, The PCI domain is only prepended when it is not 0. |
|
|
|
|
|
For USB devices the full chain of port numbers of hubs is composed. If the |
|
|
name gets longer than the maximum number of 15 characters, the name is not |
|
|
exported. |
|
|
The usual USB configuration == 1 and interface == 0 values are suppressed. |
|
|
|
|
|
PCI ethernet card with firmware index "1":: |
|
|
* eno1 |
|
|
|
|
|
PCI ethernet card in hotplug slot with firmware index number:: |
|
|
* ens1 |
|
|
|
|
|
PCI ethernet multi-function card with 2 ports:: |
|
|
* enp2s0f0 |
|
|
* enp2s0f1 |
|
|
|
|
|
PCI wlan card:: |
|
|
* wlp3s0 |
|
|
|
|
|
USB built-in 3G modem:: |
|
|
* wwp0s29u1u4i6 |
|
|
|
|
|
USB Android phone:: |
|
|
* enp0s29u1u2 |
|
|
===================== |
|
|
|
|
|
**ip=**__{dhcp|on|any|dhcp6|auto6}__:: |
|
|
dhcp|on|any::: get ip from dhcp server from all interfaces. If root=dhcp, |
|
|
loop sequentially through all interfaces (eth0, eth1, ...) and use the first |
|
|
with a valid DHCP root-path. |
|
|
|
|
|
auto6::: IPv6 autoconfiguration |
|
|
|
|
|
dhcp6::: IPv6 DHCP |
|
|
|
|
|
**ip=**__<interface>__:__{dhcp|on|any|dhcp6|auto6}__[:[__<mtu>__][:__<macaddr>__]]:: |
|
|
This parameter can be specified multiple times. |
|
|
+ |
|
|
===================== |
|
|
dhcp|on|any|dhcp6::: get ip from dhcp server on a specific interface |
|
|
auto6::: do IPv6 autoconfiguration |
|
|
<macaddr>::: optionally **set** <macaddr> on the <interface>. This |
|
|
cannot be used in conjunction with the **ifname** argument for the |
|
|
same <interface>. |
|
|
===================== |
|
|
|
|
|
**ip=**__<client-IP>__:[__<peer>__]:__<gateway-IP>__:__<netmask>__:__<client_hostname>__:__<interface>__:__{none|off|dhcp|on|any|dhcp6|auto6|ibft}__[:[__<mtu>__][:__<macaddr>__]]:: |
|
|
explicit network configuration. If you want do define a IPv6 address, put it |
|
|
in brackets (e.g. [2001:DB8::1]). This parameter can be specified multiple |
|
|
times. __<peer>__ is optional and is the address of the remote endpoint |
|
|
for pointopoint interfaces and it may be followed by a slash and a decimal |
|
|
number, encoding the network prefix length. |
|
|
+ |
|
|
===================== |
|
|
<macaddr>::: optionally **set** <macaddr> on the <interface>. This |
|
|
cannot be used in conjunction with the **ifname** argument for the |
|
|
same <interface>. |
|
|
===================== |
|
|
|
|
|
**ip=**__<client-IP>__:[__<peer>__]:__<gateway-IP>__:__<netmask>__:__<client_hostname>__:__<interface>__:__{none|off|dhcp|on|any|dhcp6|auto6|ibft}__[:[__<dns1>__][:__<dns2>__]]:: |
|
|
explicit network configuration. If you want do define a IPv6 address, put it |
|
|
in brackets (e.g. [2001:DB8::1]). This parameter can be specified multiple |
|
|
times. __<peer>__ is optional and is the address of the remote endpoint |
|
|
for pointopoint interfaces and it may be followed by a slash and a decimal |
|
|
number, encoding the network prefix length. |
|
|
|
|
|
**ifname=**__<interface>__:__<MAC>__:: |
|
|
Assign network device name <interface> (ie "bootnet") to the NIC with |
|
|
MAC <MAC>. |
|
|
+ |
|
|
WARNING: Do **not** use the default kernel naming scheme for the interface name, |
|
|
as it can conflict with the kernel names. So, don't use "eth[0-9]+" for the |
|
|
interface name. Better name it "bootnet" or "bluesocket". |
|
|
|
|
|
**rd.route=**__<net>__/__<netmask>__:__<gateway>__[:__<interface>__]:: |
|
|
Add a static route with route options, which are separated by a colon. |
|
|
IPv6 addresses have to be put in brackets. |
|
|
+ |
|
|
[listing] |
|
|
.Example |
|
|
-- |
|
|
rd.route=192.168.200.0/24:192.168.100.222:ens10 |
|
|
rd.route=192.168.200.0/24:192.168.100.222 |
|
|
rd.route=192.168.200.0/24::ens10 |
|
|
rd.route=[2001:DB8:3::/8]:[2001:DB8:2::1]:ens10 |
|
|
-- |
|
|
|
|
|
**bootdev=**__<interface>__:: |
|
|
specify network interface to use routing and netroot information from. |
|
|
Required if multiple ip= lines are used. |
|
|
|
|
|
**BOOTIF=**__<MAC>__:: |
|
|
specify network interface to use routing and netroot information from. |
|
|
|
|
|
**rd.bootif=0**:: |
|
|
Disable BOOTIF parsing, which is provided by PXE |
|
|
|
|
|
**nameserver=**__<IP>__ [**nameserver=**__<IP>__ ...]:: |
|
|
specify nameserver(s) to use |
|
|
|
|
|
**rd.peerdns=0**:: |
|
|
Disable DNS setting of DHCP parameters. |
|
|
|
|
|
**biosdevname=0**:: |
|
|
boolean, turn off biosdevname network interface renaming |
|
|
|
|
|
**rd.neednet=1**:: |
|
|
boolean, bring up network even without netroot set |
|
|
|
|
|
**vlan=**__<vlanname>__:__<phydevice>__:: |
|
|
Setup vlan device named <vlanname> on <phydeivce>. |
|
|
We support the four styles of vlan names: VLAN_PLUS_VID (vlan0005), |
|
|
VLAN_PLUS_VID_NO_PAD (vlan5), DEV_PLUS_VID (eth0.0005), |
|
|
DEV_PLUS_VID_NO_PAD (eth0.5) |
|
|
|
|
|
**bond=**__<bondname>__[:__<bondslaves>__:[:__<options>__]]:: |
|
|
Setup bonding device <bondname> on top of <bondslaves>. |
|
|
<bondslaves> is a comma-separated list of physical (ethernet) interfaces. |
|
|
<options> is a comma-separated list on bonding options (modinfo bonding for |
|
|
details) in format compatible with initscripts. If <options> includes |
|
|
multi-valued arp_ip_target option, then its values should be separated by |
|
|
semicolon. Bond without parameters assumes |
|
|
bond=bond0:eth0,eth1:mode=balance-rr |
|
|
|
|
|
**team=**__<teammaster>__:__<teamslaves>__:: |
|
|
Setup team device <teammaster> on top of <teamslaves>. |
|
|
<teamslaves> is a comma-separated list of physical (ethernet) interfaces. |
|
|
|
|
|
**bridge=**__<bridgename>__:__<ethnames>__:: |
|
|
Setup bridge <bridgename> with <ethnames>. <ethnames> is a comma-separated |
|
|
list of physical (ethernet) interfaces. Bridge without parameters assumes |
|
|
bridge=br0:eth0 |
|
|
|
|
|
NFS |
|
|
~~~ |
|
|
**root=**\[_<server-ip>_:]__<root-dir>__[:__<nfs-options>__]:: |
|
|
mount nfs share from <server-ip>:/<root-dir>, if no server-ip is given, use |
|
|
dhcp next_server. If server-ip is an IPv6 address it has to be put in |
|
|
brackets, e.g. [2001:DB8::1]. NFS options can be appended with the prefix |
|
|
":" or "," and are seperated by ",". |
|
|
|
|
|
**root=**nfs:\[_<server-ip>_:]__<root-dir>__[:__<nfs-options>__], **root=**nfs4:\[_<server-ip>_:]__<root-dir>__[:__<nfs-options>__], **root=**__{dhcp|dhcp6}__:: |
|
|
root=dhcp alone directs initrd to look at the DHCP root-path where NFS |
|
|
options can be specified. |
|
|
+ |
|
|
[listing] |
|
|
.Example |
|
|
-- |
|
|
root-path=<server-ip>:<root-dir>[,<nfs-options>] |
|
|
root-path=nfs:<server-ip>:<root-dir>[,<nfs-options>] |
|
|
root-path=nfs4:<server-ip>:<root-dir>[,<nfs-options>] |
|
|
-- |
|
|
|
|
|
**root=**_/dev/nfs_ nfsroot=\[_<server-ip>_:]__<root-dir>__[:__<nfs-options>__]:: |
|
|
_Deprecated!_ kernel Documentation_/filesystems/nfsroot.txt_ defines this |
|
|
method. This is supported by dracut, but not recommended. |
|
|
|
|
|
**rd.nfs.domain=**__<NFSv4 domain name>__:: |
|
|
Set the NFSv4 domain name. Will overwrite the settings in _/etc/idmap.conf_. |
|
|
|
|
|
**rd.net.dhcp.retry=**__<cnt>__:: |
|
|
If this option is set, dracut will try to connect via dhcp <cnt> times before failing. |
|
|
Default is 1. |
|
|
|
|
|
**rd.net.timeout.dhcp=**__<arg>__:: |
|
|
If this option is set, dhclient is called with "-timeout <arg>". |
|
|
|
|
|
**rd.net.timeout.iflink=**__<seconds>__:: |
|
|
Wait <seconds> until link shows up. Default is 60 seconds. |
|
|
|
|
|
**rd.net.timeout.ifup=**__<seconds>__:: |
|
|
Wait <seconds> until link has state "UP". Default is 20 seconds. |
|
|
|
|
|
**rd.net.timeout.route=**__<seconds>__:: |
|
|
Wait <seconds> until route shows up. Default is 20 seconds. |
|
|
|
|
|
**rd.net.timeout.ipv6dad=**__<seconds>__:: |
|
|
Wait <seconds> until IPv6 DAD is finished. Default is 50 seconds. |
|
|
|
|
|
**rd.net.timeout.ipv6auto=**__<seconds>__:: |
|
|
Wait <seconds> until IPv6 automatic addresses are assigned. Default is 40 seconds. |
|
|
|
|
|
**rd.net.timeout.carrier=**__<seconds>__:: |
|
|
Wait <seconds> until carrier is recognized. Default is 5 seconds. |
|
|
|
|
|
CIFS |
|
|
~~~ |
|
|
**root=**cifs://[__<username>__[:__<password>__]@]__<server-ip>__:__<root-dir>__:: |
|
|
mount cifs share from <server-ip>:/<root-dir>, if no server-ip is given, use |
|
|
dhcp next_server. if server-ip is an IPv6 address it has to be put in |
|
|
brackets, e.g. [2001:DB8::1]. If a username or password are not specified |
|
|
as part of the root, then they must be passed on the command line through |
|
|
cifsuser/cifspass. |
|
|
+ |
|
|
WARNING: Passwords specified on the kernel command line are visible for all |
|
|
users via the file _/proc/cmdline_ and via dmesg or can be sniffed on the |
|
|
network, when using DHCP with DHCP root-path. |
|
|
|
|
|
**cifsuser**=__<username>__:: |
|
|
Set the cifs username, if not specified as part of the root. |
|
|
|
|
|
**cifspass**=__<password>__:: |
|
|
Set the cifs password, if not specified as part of the root. |
|
|
+ |
|
|
WARNING: Passwords specified on the kernel command line are visible for all |
|
|
users via the file _/proc/cmdline_ and via dmesg or can be sniffed on the |
|
|
network, when using DHCP with DHCP root-path. |
|
|
|
|
|
iSCSI |
|
|
~~~~~ |
|
|
**root=**iscsi:[__<username>__:__<password>__[:__<reverse>__:__<password>__]@][__<servername>__]:[__<protocol>__]:[__<port>__][:[__<iscsi_iface_name>__]:[__<netdev_name>__]]:[__<LUN>__]:__<targetname>__:: |
|
|
protocol defaults to "6", LUN defaults to "0". If the "servername" field is |
|
|
provided by BOOTP or DHCP, then that field is used in conjunction with other |
|
|
associated fields to contact the boot server in the Boot stage. However, if |
|
|
the "servername" field is not provided, then the "targetname" field is then |
|
|
used in the Discovery Service stage in conjunction with other associated |
|
|
fields. See |
|
|
link:$$http://tools.ietf.org/html/rfc4173#section-5$$[rfc4173]. |
|
|
+ |
|
|
WARNING: Passwords specified on the kernel command line are visible for all |
|
|
users via the file _/proc/cmdline_ and via dmesg or can be sniffed on the |
|
|
network, when using DHCP with DHCP root-path. |
|
|
+ |
|
|
[listing] |
|
|
.Example |
|
|
-- |
|
|
root=iscsi:192.168.50.1::::iqn.2009-06.dracut:target0 |
|
|
-- |
|
|
+ |
|
|
If servername is an IPv6 address, it has to be put in brackets: |
|
|
+ |
|
|
[listing] |
|
|
.Example |
|
|
-- |
|
|
root=iscsi:[2001:DB8::1]::::iqn.2009-06.dracut:target0 |
|
|
-- |
|
|
|
|
|
**root=**__???__ **netroot=**iscsi:[__<username>__:__<password>__[:__<reverse>__:__<password>__]@][__<servername>__]:[__<protocol>__]:[__<port>__][:[__<iscsi_iface_name>__]:[__<netdev_name>__]]:[__<LUN>__]:__<targetname>__ ...:: |
|
|
multiple netroot options allow setting up multiple iscsi disks: |
|
|
+ |
|
|
[listing] |
|
|
.Example |
|
|
-- |
|
|
root=UUID=12424547 |
|
|
netroot=iscsi:192.168.50.1::::iqn.2009-06.dracut:target0 |
|
|
netroot=iscsi:192.168.50.1::::iqn.2009-06.dracut:target1 |
|
|
-- |
|
|
+ |
|
|
If servername is an IPv6 address, it has to be put in brackets: |
|
|
+ |
|
|
[listing] |
|
|
.Example |
|
|
-- |
|
|
netroot=iscsi:[2001:DB8::1]::::iqn.2009-06.dracut:target0 |
|
|
-- |
|
|
+ |
|
|
WARNING: Passwords specified on the kernel command line are visible for all |
|
|
users via the file _/proc/cmdline_ and via dmesg or can be sniffed on the |
|
|
network, when using DHCP with DHCP root-path. |
|
|
You may want to use rd.iscsi.firmware. |
|
|
|
|
|
**root=**__???__ **rd.iscsi.initiator=**__<initiator>__ **rd.iscsi.target.name=**__<target name>__ **rd.iscsi.target.ip=**__<target ip>__ **rd.iscsi.target.port=**__<target port>__ **rd.iscsi.target.group=**__<target group>__ **rd.iscsi.username=**__<username>__ **rd.iscsi.password=**__<password>__ **rd.iscsi.in.username=**__<in username>__ **rd.iscsi.in.password=**__<in password>__:: |
|
|
manually specify all iscsistart parameter (see **+iscsistart --help+**) |
|
|
+ |
|
|
WARNING: Passwords specified on the kernel command line are visible for all |
|
|
users via the file _/proc/cmdline_ and via dmesg or can be sniffed on the |
|
|
network, when using DHCP with DHCP root-path. |
|
|
You may want to use rd.iscsi.firmware. |
|
|
|
|
|
**root=**_???_ **netroot=**iscsi **rd.iscsi.firmware=1**:: |
|
|
will read the iscsi parameter from the BIOS firmware |
|
|
|
|
|
**rd.iscsi.param=**__<param>__:: |
|
|
<param> will be passed as "--param <param>" to iscsistart. |
|
|
This parameter can be specified multiple times. |
|
|
+ |
|
|
[listing] |
|
|
.Example |
|
|
-- |
|
|
"netroot=iscsi rd.iscsi.firmware=1 rd.iscsi.param=node.session.timeo.replacement_timeout=30" |
|
|
-- |
|
|
+ |
|
|
will result in |
|
|
+ |
|
|
[listing] |
|
|
-- |
|
|
iscsistart -b --param node.session.timeo.replacement_timeout=30 |
|
|
-- |
|
|
|
|
|
**rd.iscsi.ibft** **rd.iscsi.ibft=1**: |
|
|
Turn on iBFT autoconfiguration for the interfaces |
|
|
|
|
|
**rd.iscsi.waitnet=0**: |
|
|
Turn off waiting for all interfaces to be up before trying to login to the iSCSI targets. |
|
|
|
|
|
**rd.iscsi.testroute=0**: |
|
|
Turn off checking, if the route to the iSCSI target IP is possible before trying to login. |
|
|
|
|
|
FCoE |
|
|
~~~~ |
|
|
**fcoe=**__<edd|interface|MAC>__:__{dcb|nodcb}__:: |
|
|
Try to connect to a FCoE SAN through the NIC specified by _<interface>_ or |
|
|
_<MAC>_ or EDD settings. For the second argument, currently only nodcb is |
|
|
supported. This parameter can be specified multiple times. |
|
|
+ |
|
|
NOTE: letters in the MAC-address must be lowercase! |
|
|
|
|
|
NBD |
|
|
~~~ |
|
|
**root=**??? **netroot=**nbd:__<server>__:__<port/exportname>__[:__<fstype>__[:__<mountopts>__[:__<nbdopts>__]]]:: |
|
|
mount nbd share from <server>. |
|
|
+ |
|
|
NOTE: |
|
|
If "exportname" instead of "port" is given the standard port is used. |
|
|
Newer versions of nbd are only supported with "exportname". |
|
|
|
|
|
**root=dhcp** with **dhcp** **root-path=**nbd:__<server>__:__<port/exportname>__[:__<fstype>__[:__<mountopts>__[:__<nbdopts>__]]]:: |
|
|
root=dhcp alone directs initrd to look at the DHCP root-path where NBD |
|
|
options can be specified. This syntax is only usable in cases where you are |
|
|
directly mounting the volume as the rootfs. |
|
|
+ |
|
|
NOTE: |
|
|
If "exportname" instead of "port" is given the standard port is used. |
|
|
Newer versions of nbd are only supported with "exportname". |
|
|
|
|
|
DASD |
|
|
~~~~ |
|
|
**rd.dasd=**....:: |
|
|
same syntax as the kernel module parameter (s390 only) |
|
|
|
|
|
ZFCP |
|
|
~~~~ |
|
|
**rd.zfcp=**__<zfcp adaptor device bus ID>__,__<WWPN>__,__<FCPLUN>__:: |
|
|
rd.zfcp can be specified multiple times on the kernel command line. |
|
|
+ |
|
|
[listing] |
|
|
.Example |
|
|
-- |
|
|
rd.zfcp=0.0.4000,0x5005076300C213e9,0x5022000000000000 |
|
|
-- |
|
|
|
|
|
**rd.zfcp.conf=0**:: |
|
|
ignore zfcp.conf included in the initramfs |
|
|
|
|
|
ZNET |
|
|
~~~~ |
|
|
**rd.znet=**__<nettype>__,__<subchannels>__,__<options>__:: |
|
|
rd.znet can be specified multiple times on the kernel command line. |
|
|
+ |
|
|
[listing] |
|
|
.Example |
|
|
-- |
|
|
rd.znet=qeth,0.0.0600,0.0.0601,0.0.0602,layer2=1,portname=foo |
|
|
rd.znet=ctc,0.0.0600,0.0.0601,protocol=bar |
|
|
-- |
|
|
|
|
|
Booting live images |
|
|
~~~~~~~~~~~~~~~~~~~ |
|
|
Dracut offers multiple options for live booted images: |
|
|
|
|
|
===================== |
|
|
SquashFS with read-only filesystem image::: The system will boot with a read |
|
|
only filesystem from the SquashFS and apply a writable device-mapper snapshot |
|
|
over the read only filesystem. Using this method ensures a relatively fast |
|
|
boot and lower RAM usage. Users **must be careful** to avoid writing too many |
|
|
blocks to the snapshot volume. Once the blocks of the snapshot overlay are |
|
|
exhausted, the root filesystem becomes unusable and requires a reboot. A |
|
|
persistent overlay is marked Invalid, and requires a difficult recovery. |
|
|
Non-persistent overlays default to 512 MiB in RAM, but the size can be adjusted |
|
|
with the **rd.live.overlay.size=** kernel command line option. |
|
|
+ |
|
|
The filesystem structure is expected to be: |
|
|
+ |
|
|
[listing] |
|
|
-- |
|
|
squashfs.img | Squashfs from LiveCD .iso downloaded via network |
|
|
!(mount) |
|
|
/LiveOS |
|
|
|- ext3fs.img | Filesystem image to mount read-only |
|
|
!(mount) |
|
|
/bin | Live filesystem |
|
|
/boot | |
|
|
/dev | |
|
|
... | |
|
|
-- |
|
|
+ |
|
|
Dracut uses this method of live booting by default. No additional command line |
|
|
options are required other than **root=live:<URL>** to specify the location |
|
|
of your squashed filesystem. |
|
|
+ |
|
|
- The compressed SquashFS image can be copied during boot to RAM at |
|
|
`/run/initramfs/squashed.img` by using the **rd.live.ram=1** option. |
|
|
- A device with a persistent overlay can be booted read only by using the |
|
|
**rd.live.overlay.readonly** option on the kernel command line. This will |
|
|
cause a temporary, writable overlay to be stacked over a read-only snapshot |
|
|
of the root filesystem. |
|
|
+ |
|
|
Uncompressed live filesystem image::: |
|
|
When the live system was installed with the '--skipcompress' option of the |
|
|
__livecd-iso-to-disk__ installation script for Live USB devices, the root |
|
|
filesystem image, `ext3fs.img`, is expanded on installation and no SquashFS |
|
|
is involved during boot. |
|
|
+ |
|
|
- If **rd.live.ram=1** is used in this situation, the full, uncompressed |
|
|
root filesystem is copied during boot to `/run/initramfs/rootfs.img` in the |
|
|
`/run` tmpfs. |
|
|
+ |
|
|
- If **rd.live.overlay=none** is provided as a kernel command line option, |
|
|
a writable, linear device-mapper target is created on boot with no overlay. |
|
|
|
|
|
writable filesystem image::: |
|
|
The system will retrieve a compressed filesystem image, extract it to |
|
|
`/run/initramfs/fsimg/rootfs.img`, connect it to a loop device, create a |
|
|
writable, linear device-mapper target at `/dev/mapper/live-rw`, and mount that |
|
|
as a writable volume at `/`. More RAM is required during boot but the live |
|
|
filesystem is easier to manage if it becomes full. Users can make a filesystem |
|
|
image of any size and that size will be maintained when the system boots. There |
|
|
is no persistence of root filesystem changes between boots with this option. |
|
|
+ |
|
|
The filesystem structure is expected to be: |
|
|
+ |
|
|
[listing] |
|
|
-- |
|
|
rootfs.tgz | Compressed tarball containing fileystem image |
|
|
!(unpack) |
|
|
/rootfs.img | Filesystem image at /run/initramfs/fsimg/ |
|
|
!(mount) |
|
|
/bin | Live filesystem |
|
|
/boot | |
|
|
/dev | |
|
|
... | |
|
|
-- |
|
|
+ |
|
|
To use this boot option, ensure that **rd.writable.fsimg=1** is in your kernel |
|
|
command line and add the **root=live:<URL>** to specify the location |
|
|
of your compressed filesystem image tarball or SquashFS image. |
|
|
===================== |
|
|
|
|
|
**rd.writable.fsimg=**1:: |
|
|
Enables writable filesystem support. The system will boot with a fully |
|
|
writable (but non-persistent) filesystem without snapshots __(see notes above |
|
|
about available live boot options)__. You can use the **rootflags** option to |
|
|
set mount options for the live filesystem as well __(see documentation about |
|
|
rootflags in the **Standard** section above)__. |
|
|
This implies that the whole image is copied to RAM before the boot continues. |
|
|
+ |
|
|
NOTE: There must be enough free RAM available to hold the complete image. |
|
|
+ |
|
|
This method is very suitable for diskless boots. |
|
|
|
|
|
**root=**live:__<url>__:: |
|
|
Boots a live image retrieved from __<url>__. Valid handlers: __http, https, ftp, torrent, tftp__. |
|
|
+ |
|
|
[listing] |
|
|
.Example |
|
|
-- |
|
|
root=live:http://example.com/liveboot.img |
|
|
root=live:ftp://ftp.example.com/liveboot.img |
|
|
root=live:torrent://example.com/liveboot.img.torrent |
|
|
-- |
|
|
|
|
|
**rd.live.debug=**1:: |
|
|
Enables debug output from the live boot process. |
|
|
|
|
|
**rd.live.dir=**__<path>__:: |
|
|
Specifies the directory within the squashfs where the ext3fs.img or rootfs.img |
|
|
can be found. By default, this is __LiveOS__. |
|
|
|
|
|
**rd.live.squashimg=**__<filename of SquashFS image>__:: |
|
|
Specifies the filename for a SquashFS image of the root filesystem. |
|
|
By default, this is __squashfs.img__. |
|
|
|
|
|
**rd.live.ram=**1:: |
|
|
Copy the complete image to RAM and use this for booting. This is useful |
|
|
when the image resides on, i.e., a DVD which needs to be ejected later on. |
|
|
|
|
|
**rd.live.overlay=**__<devspec>__:__(<pathspec>|auto)__|__none__:: |
|
|
Allow the usage of a permanent overlay. |
|
|
- _<devspec>_ specifies the path to a device with a mountable filesystem. |
|
|
- _<pathspec>_ is the path to a file within that filesystem, which shall be |
|
|
used to persist the changes made to the device specified by the |
|
|
**root=live:__<url>__** option. |
|
|
- _none_ specifies no overlay when an uncompressed live root filesystem is |
|
|
available. |
|
|
+ |
|
|
[listing] |
|
|
.Example |
|
|
-- |
|
|
rd.live.overlay=/dev/sdb1:persistent-overlay.img |
|
|
-- |
|
|
|
|
|
**rd.live.overlay.size=**__<size_MiB>__:: |
|
|
Specifies a non-persistent overlay size in MiB. The default is _512_. |
|
|
|
|
|
**rd.live.overlay.readonly=**1:: |
|
|
Specifies a non-persistent, writable snapshot overlay to be stacked over a |
|
|
read-only snapshot of the root filesystem, `/dev/mapper/live-ro`. |
|
|
|
|
|
**rd.live.overlay.reset=**1:: |
|
|
Specifies that a persistent overlay should be reset on boot. All root |
|
|
filesystem changes are vacated by this action. |
|
|
|
|
|
**rd.live.overlay.thin=**1:: |
|
|
Enables the usage of thin snapshots instead of classic dm snapshots. |
|
|
The advantage of thin snapshots is that they support discards, and will free |
|
|
blocks that are not claimed by the filesystem. In this use case, this means |
|
|
that memory is given back to the kernel when the filesystem does not claim it |
|
|
anymore. |
|
|
|
|
|
|
|
|
Plymouth Boot Splash |
|
|
~~~~~~~~~~~~~~~~~~~~ |
|
|
**plymouth.enable=0**:: |
|
|
disable the plymouth bootsplash completely. |
|
|
|
|
|
**rd.plymouth=0**:: |
|
|
disable the plymouth bootsplash only for the initramfs. |
|
|
|
|
|
Kernel keys |
|
|
~~~~~~~~~~~ |
|
|
**masterkey=**__<kernel master key path name>__:: |
|
|
Set the path name of the kernel master key. |
|
|
+ |
|
|
[listing] |
|
|
.Example |
|
|
-- |
|
|
masterkey=/etc/keys/kmk-trusted.blob |
|
|
-- |
|
|
|
|
|
**masterkeytype=**__<kernel master key type>__:: |
|
|
Set the type of the kernel master key. |
|
|
+ |
|
|
[listing] |
|
|
.Example |
|
|
-- |
|
|
masterkeytype=trusted |
|
|
-- |
|
|
|
|
|
**evmkey=**__<EVM key path name>__:: |
|
|
Set the path name of the EVM key. |
|
|
+ |
|
|
[listing] |
|
|
.Example |
|
|
-- |
|
|
evmkey=/etc/keys/evm-trusted.blob |
|
|
-- |
|
|
|
|
|
**ecryptfskey=**__<eCryptfs key path name>__:: |
|
|
Set the path name of the eCryptfs key. |
|
|
+ |
|
|
[listing] |
|
|
.Example |
|
|
-- |
|
|
ecryptfskey=/etc/keys/ecryptfs-trusted.blob |
|
|
-- |
|
|
|
|
|
Deprecated, renamed Options |
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
|
|
Here is a list of options, which were used in dracut prior to version 008, and |
|
|
their new replacement. |
|
|
|
|
|
rdbreak:: rd.break |
|
|
|
|
|
rd_CCW:: rd.ccw |
|
|
|
|
|
rd_DASD_MOD:: rd.dasd |
|
|
|
|
|
rd_DASD:: rd.dasd |
|
|
|
|
|
rdinitdebug rdnetdebug:: rd.debug |
|
|
|
|
|
rd_NO_DM:: rd.dm=0 |
|
|
|
|
|
rd_DM_UUID:: rd.dm.uuid |
|
|
|
|
|
rdblacklist:: rd.driver.blacklist |
|
|
|
|
|
rdinsmodpost:: rd.driver.post |
|
|
|
|
|
rdloaddriver:: rd.driver.pre |
|
|
|
|
|
rd_NO_FSTAB:: rd.fstab=0 |
|
|
|
|
|
rdinfo:: rd.info |
|
|
|
|
|
check:: rd.live.check |
|
|
|
|
|
rdlivedebug:: rd.live.debug |
|
|
|
|
|
live_dir:: rd.live.dir |
|
|
|
|
|
liveimg:: rd.live.image |
|
|
|
|
|
overlay:: rd.live.overlay |
|
|
|
|
|
readonly_overlay:: rd.live.overlay.readonly |
|
|
|
|
|
reset_overlay:: rd.live.overlay.reset |
|
|
|
|
|
live_ram:: rd.live.ram |
|
|
|
|
|
rd_NO_CRYPTTAB:: rd.luks.crypttab=0 |
|
|
|
|
|
rd_LUKS_KEYDEV_UUID:: rd.luks.keydev.uuid |
|
|
|
|
|
rd_LUKS_KEYPATH:: rd.luks.keypath |
|
|
|
|
|
rd_NO_LUKS:: rd.luks=0 |
|
|
|
|
|
rd_LUKS_UUID:: rd.luks.uuid |
|
|
|
|
|
rd_NO_LVMCONF:: rd.lvm.conf |
|
|
|
|
|
rd_LVM_LV:: rd.lvm.lv |
|
|
|
|
|
rd_NO_LVM:: rd.lvm=0 |
|
|
|
|
|
rd_LVM_SNAPSHOT:: rd.lvm.snapshot |
|
|
|
|
|
rd_LVM_SNAPSIZE:: rd.lvm.snapsize |
|
|
|
|
|
rd_LVM_VG:: rd.lvm.vg |
|
|
|
|
|
rd_NO_MDADMCONF:: rd.md.conf=0 |
|
|
|
|
|
rd_NO_MDIMSM:: rd.md.imsm=0 |
|
|
|
|
|
rd_NO_MD:: rd.md=0 |
|
|
|
|
|
rd_MD_UUID:: rd.md.uuid |
|
|
|
|
|
rd_NO_MULTIPATH: rd.multipath=0 |
|
|
|
|
|
rd_NFS_DOMAIN:: rd.nfs.domain |
|
|
|
|
|
iscsi_initiator:: rd.iscsi.initiator |
|
|
|
|
|
iscsi_target_name:: rd.iscsi.target.name |
|
|
|
|
|
iscsi_target_ip:: rd.iscsi.target.ip |
|
|
|
|
|
iscsi_target_port:: rd.iscsi.target.port |
|
|
|
|
|
iscsi_target_group:: rd.iscsi.target.group |
|
|
|
|
|
iscsi_username:: rd.iscsi.username |
|
|
|
|
|
iscsi_password:: rd.iscsi.password |
|
|
|
|
|
iscsi_in_username:: rd.iscsi.in.username |
|
|
|
|
|
iscsi_in_password:: rd.iscsi.in.password |
|
|
|
|
|
iscsi_firmware:: rd.iscsi.firmware=0 |
|
|
|
|
|
rd_NO_PLYMOUTH:: rd.plymouth=0 |
|
|
|
|
|
rd_retry:: rd.retry |
|
|
|
|
|
rdshell:: rd.shell |
|
|
|
|
|
rd_NO_SPLASH:: rd.splash |
|
|
|
|
|
rdudevdebug:: rd.udev.debug |
|
|
|
|
|
rdudevinfo:: rd.udev.info |
|
|
|
|
|
rd_NO_ZFCPCONF:: rd.zfcp.conf=0 |
|
|
|
|
|
rd_ZFCP:: rd.zfcp |
|
|
|
|
|
rd_ZNET:: rd.znet |
|
|
|
|
|
KEYMAP:: vconsole.keymap |
|
|
|
|
|
KEYTABLE:: vconsole.keymap |
|
|
|
|
|
SYSFONT:: vconsole.font |
|
|
|
|
|
CONTRANS:: vconsole.font.map |
|
|
|
|
|
UNIMAP:: vconsole.font.unimap |
|
|
|
|
|
UNICODE:: vconsole.unicode |
|
|
|
|
|
EXT_KEYMAP:: vconsole.keymap.ext |
|
|
|
|
|
Configuration in the Initramfs |
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
|
|
_/etc/conf.d/_:: |
|
|
Any files found in _/etc/conf.d/_ will be sourced in the initramfs to |
|
|
set initial values. Command line options will override these values |
|
|
set in the configuration files. |
|
|
|
|
|
_/etc/cmdline_:: |
|
|
Can contain additional command line options. Deprecated, better use |
|
|
/etc/cmdline.d/*.conf. |
|
|
|
|
|
_/etc/cmdline.d/*.conf_:: |
|
|
Can contain additional command line options. |
|
|
|
|
|
AUTHOR |
|
|
------ |
|
|
Harald Hoyer |
|
|
|
|
|
SEE ALSO |
|
|
-------- |
|
|
*dracut*(8) *dracut.conf*(5)
|
|
|
|
