#!/bin/sh
#
# Format:
#	ip=[dhcp|on|any]
#
#	ip=<interface>:[dhcp|on|any]
#
#	ip=<client-IP-number>:<server-id>:<gateway-IP-number>:<netmask>:<client-hostname>:<interface>:[dhcp|on|any|none|off]
#
# When supplying more than only ip= line, <interface> is mandatory and
# bootdev= must contain the name of the primary interface to use for
# routing,dns,dhcp-options,etc.
#

. /lib/dracut-lib.sh

# Check if ip= lines should be used
if getarg ip= >/dev/null ; then
    if [ -z "$netroot" ] ; then
	echo "Warning: No netboot configured, ignoring ip= lines"
	return;
    fi
fi

# Don't mix BOOTIF=macaddr from pxelinux and ip= lines
getarg ip= >/dev/null && getarg BOOTIF= >/dev/null && \
    die "Mixing BOOTIF and ip= lines is dangerous"

# No more parsing stuff, BOOTIF says everything
[ -n "$(getarg BOOTIF)" ] && return

if [ -n "$netroot" ] && [ -z "$(getarg ip=)" ] ; then
    # No ip= argument(s) for netroot provided, defaulting to DHCP
    return;
fi

# Count ip= lines to decide whether we need bootdev= or not
if [ -z "$NEEDBOOTDEV" ] ; then
    local count=0
    for p in $(getargs ip=); do
	count=$(( $count + 1 ))
    done
    [ $count -gt 1 ] && NEEDBOOTDEV=1
fi

# If needed, check if bootdev= contains anything usable
if [ -n "$NEEDBOOTDEV" ] ; then
    BOOTDEV=$(getarg bootdev=) || die "Please supply bootdev argument for multiple ip= lines"
    [ -z "$BOOTDEV" ] && die "Bootdev argument is empty"
fi

# Check ip= lines
# XXX Would be nice if we could errorcheck ip addresses here as well
for p in $(getargs ip=); do
    ip_to_var $p

    # We need to have an ip= line for the specified bootdev
    [ -n "$NEEDBOOTDEV" ] && [ "$dev" = "$BOOTDEV" ] && BOOTDEVOK=1

    # Empty autoconf defaults to 'dhcp'
    if [ -z "$autoconf" ] ; then
	warn "Empty autoconf values default to dhcp"
	autoconf="dhcp"
    fi

    # Error checking for autoconf in combination with other values
    case $autoconf in
	error) die "Error parsing option 'ip=$p'";;
	bootp|rarp|both) die "Sorry, ip=$autoconf is currenty unsupported";;
	none|off) \
	    [ -z "$ip" ] && \
		die "For argument 'ip=$p'\nValue '$autoconf' without static configuration does not make sense"
	    [ -z "$mask" ] && \
		die "Sorry, automatic calculation of netmask is not yet supported"
	    ;;
	auto6);;
	dhcp|dhcp6|on|any) \
	    [ -n "$NEEDBOOTDEV" ] && [ -z "$dev" ] && \
	        die "Sorry, 'ip=$p' does not make sense for multiple interface configurations"
	    [ -n "$ip" ] && \
		die "For argument 'ip=$p'\nSorry, setting client-ip does not make sense for '$autoconf'"
	    ;;
	*) die "For argument 'ip=$p'\nSorry, unknown value '$autoconf'";;
    esac

    if [ -n "$dev" ] ; then
        # We don't like duplicate device configs
	if [ -n "$IFACES" ] ; then
	    for i in $IFACES ; do
		[ "$dev" = "$i" ] && die "For argument 'ip=$p'\nDuplication configurations for '$dev'"
	    done
	fi
	# IFACES list for later use
	IFACES="$IFACES $dev"
    fi

    # Small optimization for udev rules
    [ -z "$NEEDBOOTDEV" ] && [ -n "$dev" ] && BOOTDEV=$dev

    # Do we need to check for specific options?
    if [ -n "$NEEDDHCP" ] || [ -n "$DHCPORSERVER" ] ; then
	# Correct device? (Empty is ok as well)
	[ "$dev" = "$BOOTDEV" ] || continue
	# Server-ip is there?
	[ -n "$DHCPORSERVER" ] && [ -n "$srv" ] && continue
	# dhcp? (It's simpler to check for a set ip. Checks above ensure that if
	# ip is there, we're static
	[ -z "$ip" ] && continue
	# Not good!
	die "Server-ip or dhcp for netboot needed, but current arguments say otherwise"
    fi

done

# This ensures that BOOTDEV is always first in IFACES
if [ -n "$BOOTDEV" ] && [ -n "$IFACES" ] ; then 
    IFACES="${IFACES%$BOOTDEV*} ${IFACES#*$BOOTDEV}"
    IFACES="$BOOTDEV $IFACES"
fi

# Store BOOTDEV and IFACES for later use
[ -n "$BOOTDEV" ] && echo $BOOTDEV > /tmp/net.bootdev
[ -n "$IFACES" ]  && echo $IFACES > /tmp/net.ifaces

# We need a ip= line for the configured bootdev= 
[ -n "$NEEDBOOTDEV" ] && [ -z "$BOOTDEVOK" ] && die "Bootdev Argument '$BOOTDEV' not found"