e0a5dec4a4
Merge pull request #88 from shoop/staticroutegw
...
The default gateway might need a static route
2015-08-24 11:53:01 +02:00
110858025a
The default gateway might need a static route
...
Some hosting providers need a static route set in order to be
able to reach the default gateway. Be sure to retry adding
the default gateway after setting the static routes.
2015-08-23 14:45:53 +02:00
0a66b74b51
TEST-30-ISCSI: test more and set static initiator name
2015-08-13 11:54:24 +02:00
6802cf2349
iscsi/iscsiroot.sh: handle timeout with all interfaces up
...
restart iscsid, because it may disbehaved
2015-08-13 11:53:21 +02:00
feb8dc685d
iscsi/parse-iscsiroot.sh: use iBFT initiator name
2015-08-12 15:17:33 +02:00
69171aa8fa
dracut.cmdline.7.asc: document rd.iscsi.waitnet and rd.iscsi.testroute
2015-08-12 15:11:17 +02:00
c22c43f81a
TEST-30-ISCSI: switch to scsi-target-utils
...
netbsd-iscsi is not available on RHEL
Beef up the testsuite to use the two targets over different
interfaces.
Test the new iSCSI parameters rd.iscsi.waitnet and rd.iscsi.testroute.
2015-08-12 14:48:19 +02:00
52b91b6698
TEST-30-ISCSI/dhcpd.conf: set the LUN
...
set the LUN, so the udev rule to mount the disk matches
2015-08-12 14:40:42 +02:00
d94050ddae
iscsi: integrate with systemd and improve robustness
...
parse-cmdline sets up an initial initiator-name to let iscsid start.
iscsid is started before doing any iscsistart business.
iscsistart is done with systemd-run asynchrone to do things in
paralllel. Also restarted for every new interface which shows up.
If rd.iscsi.waitnet (default) is set, iscsistart is done only
after all interfaces are up.
If not all interfaces are up and rd.iscsi.testroute (default) is set,
the route to a iscsi target IP is checked and skipped, if there is none.
If all things fail, we issue a "dummy" interface iscsiroot to retry
everything in the initqueue/timeout.
2015-08-12 14:33:49 +02:00
f41720c311
base/dracut-lib.sh: forget about the idea of output redirection
...
It's just not working :-/
2015-08-12 14:28:45 +02:00
8ba684be1c
dracut-systemd/dracut-initqueue.sh: be verbose about timeout
...
Issue a warning, if timeout scripts are executed
2015-08-12 14:27:39 +02:00
50e86bf02b
nfs/parse-nfsroot.sh: silence useless warning if netroot is not nfs
2015-08-12 14:27:01 +02:00
4e9ba952bf
network/parse-ip-opts.sh: assume rd.neednet for multiple ip options
...
set rd.neednet on the kernel cmdline to disable this behaviour
2015-08-12 14:25:23 +02:00
b1b704bd67
systemd: add systemd-run and systemd-escape
2015-08-12 14:24:45 +02:00
01b23b6900
network/net-lib.sh: add is_ip()
...
add function to test if string is a valid IP
2015-08-12 14:24:05 +02:00
3c00189988
dracut.sh: remove quotes from install_items and install_optional_items
...
Unfortunately these are lists with whitespaces.
2015-08-10 14:05:15 +02:00
e6a2555c7d
base/dracut-lib.sh: Dup stdout and stderr
...
Dup stdout and stderr, so that subshell redirection does not affect
logging.
Also gets rid of systemd printing info() to the console on "quiet".
2015-08-10 13:40:43 +02:00
4f50a9bfb1
Revert securitfs change
...
Commit 5e60145
2015-08-03 12:36:05 +02:00
41ac16b26f
Define new script to load keys on the IMA keyring (update)
...
This patch supports loading keys either on the _ima keyring or, as of
Linux 3.17, on the trusted .ima keyring. Only certificates signed by
a key on the system keyring can be loaded onto the trusted .ima keyring.
Changelog:
- Update 98integrity/README
2015-08-03 12:36:05 +02:00
396d3cc7ff
Extend evm-enable.sh to load the EVM public key
...
Create the _evm keyring and load the EVM public key on it.
2015-08-03 12:36:05 +02:00
b05ad85b0c
Remove 98integrity's dependency on selinux
...
Loading the EVM key(s) is not dependent on selinux. Remove
the dependency.
2015-08-03 12:36:05 +02:00
4135eea634
90qemu: fixed systemd-detect-virt output parsing
...
redirecting systemd-detect-virt to /dev/null doesn't help with parsing
the output :-/
Also, add "Red Hat" as a vendor.
2015-07-31 09:05:51 +02:00
96d694c0b5
dracut.sh: simplify modalias reading
2015-07-30 12:11:42 +02:00
da5304aabc
dracut-initramfs-restore: make mount error nonfatal
...
Script enables errexit option (set -e). So if /boot is not a mount point
or is already mounted, then script dies after unsuccessful mount
command. Fix this by always returning successful result.
2015-07-28 15:04:56 +02:00
cce34acace
qemu: add spapr-vscsi kernel module
2015-07-28 11:55:04 +02:00
607ff8204b
Merge pull request #85 from Quarky9/master
...
40network/net-lib.sh: get_ip() Add missing echo to output the result
2015-07-27 13:40:53 +02:00
2082cdf230
crypt: s/allow-discards/discard for crypttab
...
actually the option in crypttab is named "discard" and not
"allow-discards"
https://bugzilla.suse.com/show_bug.cgi?id=932972
2015-07-27 13:30:22 +02:00
c1c96f2c47
Add missing echo to output the result.
...
Only place this function is currently called seems from line 28 in modules.d/95nfs/nfs-lib.sh. Bug fix.
2015-07-25 01:17:04 +00:00
693b7a3283
Cleanup compressor handling
...
If no compressor is specified, try to find a suitable one.
Check if kernel modules can be uncompressed.
2015-07-22 11:35:28 +02:00
7eeaa4ab14
remove the incomplete .img file
...
If the directory where the .img file is saved has no enough space, or in
other wrong conditions, dracut will get an incomplete file xxx.img. But
sometimes this .img file will be loaded when rebooting the system. And then
some bugs will happen because this .img file is wrong.
So I think dracut should remove the incomplete file because this .img file
with problems was made by dracut. And then the wrong file will not be loaded
anymore.
Signed-off-by: Chao Fan <cfan@redhat.com>
2015-07-21 12:05:42 +02:00
f4d64d55ea
dmsquash-generator.sh: increase timeout for checkisomd5
...
if the checkisomd5 takes longer than 3 minutes, the device timeout for
/dev/mapper/live-rw cancels the boot process.
2015-07-18 13:02:25 +02:00
ff55a8939c
Merge pull request #81 from floppym/printf2
...
Replace echo -n with printf in code with a /bin/sh shebang
2015-07-16 12:02:48 +02:00
e50f91e600
use mktemp "-p" instead of "--tmpdir" for busybox
2015-07-15 11:47:43 +02:00
7f2ea02b4a
dracut.spec: add dracut-init.sh
2015-07-15 11:47:43 +02:00
24f32511fc
syncheck: Look for 'echo -n' usage in modules
2015-07-14 22:24:27 -04:00
5899f2f516
Replace echo -n with printf in code with a /bin/sh shebang
...
POSIX does not mandate that echo support the -n parameter.
printf has more well-defined behavior.
2015-07-14 22:22:14 -04:00
e47907cc6b
dracut-systemd/dracut-initqueue: only start service if really needed
...
Only start the dracut-initqueue.service, if the dracut_need_initqueue
command was issued on creation or later on set.
2015-07-13 10:51:47 +02:00
968280e370
crypt: skip crypttab entries with the same device
...
It was only checked, if the name of the crypttab entry matched.
This patch adds checking, if the device matches.
2015-07-13 10:44:27 +02:00
8c7dc032f8
TODO: update
2015-07-13 10:38:16 +02:00
df0bdd5ae9
network: add rd.peerdns=0 parameter
...
Add rd.peerdns=0 parameter to disable DHCP nameserver setting
2015-07-13 10:14:15 +02:00
ee44f62972
dracut.sh: early check for bash version
2015-07-09 19:44:30 +02:00
e8f19bcf26
dracut.sh: remember $0 for --regenerate-all
2015-07-09 18:22:15 +02:00
cb0913db0d
dracut.sh: reduce code
2015-07-09 18:06:55 +02:00
32de4eb5d3
dracut-functions.sh: simplify some for loops
...
continue early, if condition is not met
2015-07-09 15:36:25 +02:00
3721635b2c
guard ${arrays[@]} with ""
2015-07-09 15:36:25 +02:00
694725abf0
dracut.sh: remove pop()
2015-07-09 15:36:25 +02:00
e833e26137
dracut.conf: remove example parameters
2015-07-09 15:36:25 +02:00
5a66d51102
dracut.sh: remove push()
...
can be done with var+=(val)
2015-07-09 15:36:25 +02:00
1cadc26fd4
Add all btrfs devices
...
We have to find them with "btrfs usage", which is cumbersome.
2015-07-09 15:36:25 +02:00
78362bc5fe
network/dhclient-script.sh: remove bashism
2015-07-08 08:49:02 +02:00
Harald Hoyer