When in hostonly mode, 95fcoe module will still be installed even there
is no FCoE hostonly device. So use the new block_is_fcoe helper to check
for hostonly device in hostonly mode, avoid installing unneccessary module.
Signed-off-by: Kairui Song <kasong@redhat.com>
If fcoe module is loaded, the initramfs will always try load libfcoe
and bnx2fc, so also ensure they are installed if needed.
Signed-off-by: Kairui Song <kasong@redhat.com>
For the shell scripts, new environment variables were introduced.
dracutsysrootdir is the root directory, file existence checks use it.
DRACUT_LDCONFIG can override ldconfig with a different one that works
on the sysroot with foreign binaries.
DRACUT_LDD can override ldd with a different one that works
with foreign binaries.
DRACUT_TESTBIN can override /bin/sh. A cross-compiled sysroot
may use symlinks that are valid only when running on the target
so a real file must be provided that exist in the sysroot.
DRACUT_INSTALL now supports debugging dracut-install in itself
when run by dracut but without debugging the dracut scripts.
E.g. DRACUT_INSTALL="valgrind dracut-install or
DRACUT_INSTALL="dracut-install --debug".
DRACUT_COMPRESS_BZIP2, DRACUT_COMPRESS_LBZIP2, DRACUT_COMPRESS_LZMA,
DRACUT_COMPRESS_XZ, DRACUT_COMPRESS_GZIP, DRACUT_COMPRESS_PIGZ,
DRACUT_COMPRESS_LZOP, DRACUT_COMPRESS_ZSTD, DRACUT_COMPRESS_LZ4,
DRACUT_COMPRESS_CAT: All of the compression utilities may be
overridden, to support the native binaries in non-standard places.
DRACUT_ARCH overrides "uname -m".
SYSTEMD_VERSION overrides "systemd --version".
The dracut-install utility was overhauled to support sysroot via
a new option -r and fixes for clang-analyze. It supports
cross-compiler-ldd from
https://gist.github.com/jerome-pouiller/c403786c1394f53f44a3b61214489e6f
DRACUT_INSTALL_PATH was introduced so dracut-install can work with
a different PATH. In a cross-compiled environment (e.g. Yocto), PATH
points to natively built binaries that are not in the host's /bin,
/usr/bin, etc. dracut-install still needs plain /bin and /usr/bin
that are relative to the cross-compiled sysroot.
The hashmap pool allocate_tile/deallocate_tile code was removed
because clang-analyze showed errors in it. hashmap_copy was removed
because it wasn't used and clang-analyze showed errors in it.
DRACUT_INSTALL_LOG_TARGET and DRACUT_INSTALL_LOG_LEVEL were
introduced so dracut-install can use different settings from
DRACUT_LOG_TARGET and DRACUT_LOG_LEVEL.
Signed-off-by: Böszörményi Zoltán <zboszor@pr.hu>
The kernel may only enable 'libfcoe' module. Some modules like bnx2fc
provides FCoE but only depend on 'libfcoe'. Loading 'fcoe' module may
fail but the kernel do support FCoE.
'libfcoe' will be installed as a dependency when installing block device
drivers if it's required. So no need to install it in installkernel.
Signed-off-by: Kairui Song <kasong@redhat.com>
The parse-fcoe.sh hook is sourced, and hence must not contain
exit 0 calls. Otherwise, the cmdline sequence will be interupted,
and no error will be reported to systemd. Use return instead.
Reference: boo#1136977
Images built with the fcoe module will always run the lldpad
service as part of their pre-trigger scripts if the network
is active. This prevents network installations in
environments where, for security reasons, LLDPDU frames
cause a switchport shutdown.
Add a new rd.nofcoe option to cause dracut to skip the
lldpad.sh script and the entire 95-fcoe module.
Signed-off-by: Patrick Talbert <ptalbert@redhat.com>
Now that we are using persistent network names we can switch
to using the interface names when specifying the fcoe configuration.
With that we can print the fcoe configuration only once.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Occasionally the FCoE connection might be reset after fipvlan was
called, causing the FCoE connection to be dropped and boot to fail.
For these cases we should be adding a timeout entry for the
initqueue to have a failsave mechanism to re-run fipvlan in
these cases.
References: bsc#1052840
Signed-off-by: Hannes Reinecke <hare@suse.com>
bnx2fc doesn't _actually_ need fcoemon, so fipvlan is sufficient
to start the FCoE connection.
And, in fact, fcoemon is started for every interface, causing
subsequent invocations to fail with
fcoemon[1157]: error 98 address already in use
and fcoemon tearing down the connection.
References: bsc#1052840
Signed-off-by: Hannes Reinecke <hare@suse.com>
The 'mode' argument was never referenced in the printf format, causing
invalid rules to be written.
References: bsc#1036323
Signed-off-by: Hannes Reinecke <hare@suse.com>
We should be disabling the FCoE connection (which triggers sending
a LOGO internally) to logout from the target; this resets the target
and will avoid hitting a busy condition during reboots.
References: bsc#994860
Signed-off-by: Hannes Reinecke <hare@suse.com>
fcoemon is well capable of figuring out whether a vlan should
be used, so there's no need to disable the AUTO_VLAN feature.
References: bsc#995019
Signed-off-by: Hannes Reinecke <hare@suse.com>
FCoE can run in Fabric (ie FCF) or VN2VN mode, so we should allowing
to set this parameter from the commandline, too.
Signed-off-by: Hannes Reinecke <hare@suse.com>
When lldpad is not running, any calls to 'dcbtool' will be printing
out a warning. As it perfectly legit to have FCoE running without
DCB we should not be printing out the error.
Signed-off-by: Hannes Reinecke <hare@suse.com>
If the installation already has a FCoE configuration we should
not attempt to overwrite it but rather use the pre-defined
configuration.
References: bsc#993861
Signed-off-by: Hannes Reinecke <hare@suse.com>
Check first if we're running off an bnx2x device and start FCoE on it
via fipvlan, then go the normal/Intel way of starting DCB.
Also the SUSE version of fcoemon needs the yes parameter for the
--syslog option
References: bsc#982588
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.com>
Some Combined Network Adapters(CNAs) implement DCB protocol
in firmware, it is recommended that do not run software-based
DCB or LLDP on CNAs that implement DCB, but we have to start
the lldpad service anyway(there might be other software DCB).
If the network interface provides hardware DCB/DCBX capabilities,
the field DCB_REQUIRED in "/etc/fcoe/cfg-xxx" is expected to
be set to "no".
We met an issue on "QLogic BCM57810" with DCB firmware support,
and found dracut still generated "fcoe=<mac>:dcb" which caused
kdump boot failure when using that fcoe dump target.
This patch parses /etc/fcoe/cfg-xxx to detect DCB_REQUIRED="no",
and force "nodcb" if it is the case.
Also improved some coding style in passing.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
bnx2x can take no longer than 3 seconds to initialize the link in some setups
which can cause fipvlan to fail and thus the fcoe interface(s) won't be
created.
Add another 10 seconds to give the link enough time to initialize.
Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com>
- check if modprobe was successful
- add a timeout for /sys/firmware/edd
- only remove the module, if it was loaded by the script
(cherry picked from commit 34203d03c0)
Setting and unsetting the IFS variable is tricky. To be on the
safe side we should always reset the IFS variable to its original
value after parsing.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
lldpad is a system-wide process, which must be started only once.
So we should be separate it from fcoe-up, as it might be called
several times.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
DCB & fipvlan can only be called on real devices, not VLAN
ones. So skip any VLAN devices which might been added to the
list of network interfaces.
References: bnc#878583
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
When running with --hostonly-cmdline we should be storing
the current configuration in /etc/cmdline.d so that dracut
will be configure the system automatically.
References: bnc#877288
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
The 'create' sysfs entry has been removed for newer fcoe modules,
so just check if the module directory exists.
References: bnc#877288
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Add new functions require_binaries() and require_any_binary() to be used
in the check() section of module-setup.sh.
These functions print a warning line telling the user, which binary is
missing for the specific dracut module.
This unifies the way of checking for binaries and makes the life of an
initramfs creator easier, if he wants to find out why a specific dracut
module is not included in the initramfs.
Harald Hoyer