Some iSCSI initiator present firmware information in
/sys/firmware/ibft or /sys/firmware/iscsi_bootX
Whenever we detect one of those directories we should assume
that the iSCSI devices should be activated.
Also incorporates SUSE patches:
0049:
95iscsi: Use 'ip=ibft' for ibft autoconfiguration
For iBFT autoconfiguration we should be setting 'ip=ibft'
instead of rd.neednet. This should instruct dracut to only
enable the iBFT interfaces and leave the rest alone.
References: bnc#879038
0054:
95iscsi: update commandline printing
dracut has a separate callout 'cmdline' which should be used
for printing out the generated commandline.
Signed-off-by: Pavel Wieczorkiewicz <pwieczorkiewicz@suse.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
The multipath and kpartx rules have different numbers in SUSE.
The 11-dm-mpath.rules file had been missing, causing
blacklisting to not work properly.
References: bnc#873151, bnc#872662, bnc#883149
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
sg3_utils now provides two rules 55-scsi-sg3_id.rules and
58-scsi-sg3_symlink.rules, which need to be included instead
of the older 59-scsi-sg3_utils.rules.
References: bnc#873151
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
This sed script to edit 64-md-raid-assemble.rules needs to
be adjusted for latest mdadm
References: bnc#866660
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
During boot systemd tries to load autofs4, but dracut will only
add it if it's loaded by the time dracut is run.
Modify dracut to always load autofs4.
References: bnc#869411
Signed-off-by: Thomas Renninger <trenn@suse.de>
Incorporates these patches:
- 0013 mkinitrd-suse: do not update bootloader if no kernel was found
bnc#858268
- 0018 mkinitrd-suse: Fix whitespaces when adding drivers
- 0032 mkinitrd-suse.sh: Use '--hostonly' and '--hostonly-cmdline' correctly
bnc#874000,bnc#874905,bnc#874363
- 0039 Remove --force parameter from mkinitrd
- 0041 mkinitd-suse: remove --hostonly and --hostonly-cmdline
Should be set via configuration files, not in the script itself.
- 0051 mkinitrd-suse: add 'update bootloader' message
- 0120 mkinitrd-suse.sh: Bail out with exit 1 if initrd cannot be generated
bnc#886630
Signed-off-by: Thomas Renninger <trenn@suse.de>
This mimicks the similar move of os-release which was done in systemd. These
files are not configuration, but part of the OS.
Still symlinks are in place for compatibility, but those should probably be
dropped eventually.
In the judgment sentence, it will print the following warning message,
becasuse of lacking the blank on the left of ']'.
/lib/net-lib.sh: line 110: [: missing `]'
Signed-off-by: Minfei Huang <mhuang@redhat.com>
some programs e.g. systemd-journald expect a directory in /var/log as
the marker to do some actions. Here journald tries to flush
/run/log/journal to /var/log/journal, if the directory is seen.
/var/log is now a symlink to /run/initramfs/log.
If the user pressed ESC while checkisomd5 runs the media check, it will
exit with "2". Previously that would mean, that the media check was not
successful.
The multipathd package might install a service and a socket
file. Using the original service file from the installed
system without the socket file triggers a bug in systemd,
causing systemd to crash.
As we don't actually need to socket file in the initrd we
should be installing our own service file which does not
reference the socket file at all.
References: bnc#871610
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
The device handler modules need to be loaded early during boot
to avoid I/O errors being printed to the system log.
References: bnc#871617
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
multipathd is using pthreads, which require libgcc_s for
pthread_cancel to work. Without it multipathd might crash
with SIGABRT.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
udevd will these days default to 'info' logging and thus will
often print out the 'starting version nnn' message (which is
logged at level 'info'), thus spamming the console, even on
'quiet' boots.
We generally expect a udev log level of err (the old default
from pre-October 2013) so we should set that explicilty before
launching udevd in order to suppress the spurious 'info' message.
As we are using the environment variable approach anyway, we
may as well use this method rather than setting the log level
later via udevadm control commands when rd.udev.info/debug are
given on the kernel command line.
The enviroment variable has been around since udev 6b493a20e1
around 2005 so should be safe to use in all cases without version
checks.
It is not available to valid the customize dhcp config
/etc/dhclient.conf in the initram environment.
Dracut uses the default follow config to construct the initramfs.
request subnet-mask, broadcast-address, time-offset, routers,
domain-name, domain-name-servers, domain-search, host-name,
root-path, interface-mtu;
Copy the customize config to make the config availably in the
initram environment.
Signed-off-by: Minfei Huang <mhuang@redhat.com>
The usb_storage, nvme and sdhci_acpi modules are discovered with the
block_module_filter so there's no need to explicitly list them here.
Signed-off-by: <pbrobinson@gmail.com>
The synthetic keyboard of a Gen2 Linux VM doesn't work before the
hyperv_keyboard module is loaded. Without it, we can't cancel the media check
phase if boot with rd.live.check option.
Gen1 Linux VM doesn't have the same issue because the host emulates the legacy
i8042 keyboard for Gen1 VM.
Signed-off-by: Vaughan Cao <vaughan.cao@oracle.com>
Hannes Reinecke