$NEWROOT/dev and its submounts should be umounted after we use it.
Otherwise it fails other scripts that umount /sysroot only.
Signed-off-by: WANG Chao <chaowang@redhat.com>
configured_ifaces is a function that returns the names of each interface
that the user wanted configured.
Currently, this is accomplished by reading the list from
/tmp/net.ifaces. But if we want to allow the user to specify an
interface by its MAC address or IP or something, we need a function that
will read the cache and convert the MACs etc. to names.
(Obviously this conversion only works once udev starts, so it will warn
you if you try it too early.)
Now that we can use a MAC as a device identifier, we can just bring up
the device specified by BOOTIF as a normal interface.
So instead of ignoring everything but BOOTIF, we'll put BOOTIF in the
IFACES list and bring it up as normal, defaulting to DHCP if nothing
else is specified.
We can also handle anaconda-style 'ksdevice=bootif' this way.
A MAC address is a unique identifier for a particular network interface.
We can use the MAC to generate udev rules to bring up that interface,
like we currently do with BOOTIF.
This patch allows interfaces to be specified as a MAC address, either
in the usual colon-separated form or the PXE-style dash-separated form.
(The latter is more useful on the commandline, since it allows for
arguments like: "ip=77-77-6f-6f-64-73:dhcp")
This is useful since it's common for a user who is booting a new OS for
the first time to know the MAC of the device, but not know what the
kernel name will be.
To set the default font for your distribution, add
i18n_default_font="latarcyrheb-sun16"
to your /lib/dracut/dracut.conf.d/01-dist.conf distribution config.
Scripts in dracut initqueue hooks are placed under
/usr/lib/dracut/hooks/initqueue/*/ directory.
And also start initqueue service when kernel cmdline has
rd.break=initqueue
Signed-off-by: WANG Chao <chaowang@redhat.com>
Currently in initrd, hardware clock is always considered to use UTC time
format and system time zone is also UTC. Thus system time isn't correct
if hw clock is localtime or we're using other time zone in real root.
To fix this, install /etc/adjtime and /etc/localtime to initrd. If not
using systemd, install /usr/sbin/hwclock for dracut init to setup system
time.
[harald: combined the two hostonly if's]
Signed-off-by: WANG Chao <chaowang@redhat.com>
Signed-off-by: Harald Hoyer <harald@redhat.com>
chroot load_policy will use selinuxfs which should be mounted
in $NEWROOT/sys/fs/selinux for Fedora 19, but because there's
no $NEWROOT/sys/fs, so later process will fail.
Fixing this by bind mount /sys to $NEWROOT/sys.
Signed-off-by: Dave Young <dyoung@redhat.com>
FIPS can work well in 1st kernel, but failed in kdump kernel. the
libssl.so.10 and related hmac file are needed. Now add it and it
works.
Signed-off-by: Baoquan He <bhe@redhat.com>
As per RHBZ #966162, parted stopped unconditionally using "p" as a
separator for dmraid device names in version 3.1, so other things need
to fall in line with that convention now.
This causes the root FS options to be incorrectly applied to to /usr
In some cases this can cause boot failure e.g. due to and XFS /usr
not supporting the 'acl' option from the ext4 root FS.
https://bugs.mageia.org/show_bug.cgi?id=9884
When dropped to emergency shell, for example, use rd.break=pre-pivot,
the PS1 won't correctly show current directory we're in:
pre-pivot:/# cd /sysroot/
pre-pivot:/#
(still shows "/")
Let's take a look at PS1 variable:
(I'm adding prefix/suffix 'x' to make it clear):
pre-pivot:/# echo x${PS1}x
xpre-pivot:/# x
(PS1 isn't dynamic)
Regarding the current dracut code, it should be:
pre-pivot:/# cd /sysroot/etc
pre-pivot:/sysroot/etc#
With this patch:
pre-pivot:/# echo x${PS1}x
xpre-pivot:${PWD}# x
(Now PS1 is dynamic, it will show the directory correctly)
I tested for both normal boot and kdump boot.
Signed-off-by: WANG Chao <chaowang@redhat.com>
now you can write grub entries like
set isofile="/Fedora-live.iso"
loopback loop $isofile
linux loop)/isolinux/vmlinuz iso-scan/filename=$isofile root=live:CDLABEL=Fedora-...
initrd (loop)/isolinux/initrd0.img
Currently the default action is emergency_shell when failure happened
during system boot. In kdump, this default may not be expected. E.g,
if dump target is not rootfs, it does not matter if mount root failed.
Adding an action which allow dracut always go ahead though failure
happens is needed by kdump.
So here add a function action_on_fail() and cmdline parameter
action_on_fail=<shell | continue>. Use action_to_fail() to replace
emergency_shell which was called after failure. By $(getarg action_on_fail=),
decide to drop into shell, or to leave away the failure and go ahead.
v3->v4:
add handling of selinux policy loaded failure, and change code format to
be consitent
Signed-off-by: Baoquan He <bhe@redhat.com>
[Edited by harald@redhat.com]
Currently dracut only support 1 bond, namyly bond0 by default. However multiple
bonds configuration may be needed. For example in kdump, in 1st kernel, more
than one bonds may be configured, and bondX other than bond0 is used as output
interface to remote host which will store dump core. This patch can solve this
problem, to write real bond information to initramfs, 2nd kdump kernel will
use it to create the relevant bondX interface.
Tested-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Baoquan He <bhe@redhat.com>
Team is the same network stack as bonding. Therefore give ifup the ability to
handle bridge over team and vlan tagged team as bonding too.
Signed-off-by: WANG Chao <chaowang@redhat.com>
Start the systemd-cryptsetup@luks-*.service for the detected crypto_LUKS
device in the initqueue, so we block in the initqueue and wait for the
password entry.
Previously I added several trace point to the begin of several
init hooks of systemd, old init script also need this debug info.
Doing same here as what's added in the systemd service scripts:
At cmdline hooks adding trace of "1+:mem 1+:iomem 3+:slab"
For other hooks adding trace of "1:shortmem 2+:mem 3+:slab"
Signed-off-by: Dave Young <dyoung@redhat.com>
The following change makes the check for the nbd port or named export
more robust.
I wasn't sure whether to include sed in the dracut_install() of
module-setup.sh since net already does that (and nbd depends on that).
To use vlan for net boot, you need to specify vlan and ip kernel options
for the boot interface. For example,
vlan=eth1.1:eth1 bootdev=eth1.1
ip=1.2.3.4:1.2.3.4::255.255.255.0:my-hostname:eth1:none
To use bridge for net boot, you need to specify bridge and ip kernel
option for the boot interface. For example
bridge=br1:eth1 bootdev=br1
ip=1.2.3.4:1.2.3.4::255.255.255.0:my-hostname:eth1:none
In my environment, I needs to boot machines from network within
a vlan or on a bridged network. I found curent dracut release
if-up.sh script in 40network module bypass ip setting for both
bridge and vlan interface.
When dracut-lib.sh is sourced it checks the command line (when not using systemd)
as part of the check_quiet() call.
Therefore mount /proc earlier in init.
Avoids the error:
init: 77: /lib/dracut-lib.sh: /proc/cmdline: No such file or directory
Just like btrfs, xfs now requires CRC module that cannot be resolved via
normal module resolving.
Move this hack into fs-lib and remove it from btrfs module.
https://bugs.mageia.org/show_bug.cgi?id=8676
For cmdline argument with numeric value, add a new function getargnum
It will get proper value with default value as $1, min value as $2,
max value as $3, and param name as $4. valid result will be echo to stdout.
for nul or value not valid it will just echo the default value.
Note: The values should be >=0
[v1->v2]: add arg <minval>
[v2->v3]: do not use bash string match =~
Signed-off-by: Dave Young <dyoung@redhat.com>
linkup is a wrapper function for waiting interface ready and up.
change to use linkup as what we do in ifup script.
Signed-off-by: Dave Young <dyoung@redhat.com>
In case that configuration file did not include name of team device,
teamd would not start. Fix this by adding "-t" parameter.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
In case long delay of network driver initqueue will exit before net dev is
ready. We have no chance to setup it then.
For dhcp, when we finish the setup there will be a setup_net_<dev>.ok. Doing
same for static ip case. Also add a check to initqueue when we generate udev
rules to ensure it's early enough.
[v1->v2]: only wait for bootdev or it's possible to cause boot fail for
waiting for non-bootdev. For example bond0->eth0, set bond0 as bootdev and
dhcp, we only need to wait bond0 setup ok.
Signed-off-by: Dave Young <dyoung@redhat.com>
In case BOOTIF is not set and IFACES are not set in bonding/vlan/bridge code,
net-genrule.sh will fall to bring up all net interfaces.
Here add a failsafe option to read IFACES from /tmp/net.ifaces
[v1->v2]: move IFACES reading from net.ifaces after bonding/vlan/bridge info
code chunks.
[v2->v3]: [ -n "$IFACES" ] should be [ -z "$IFACES" ]
Signed-off-by: Dave Young <dyoung@redhat.com>
Some network driver will take long time to initialize. We have an example
in a HP machine which take about one minute for this. The callback such as
"ip link set <dev> up" will fail, afterwards setup for network will also
fail.
Fix this by add a new function wait_for_if_link, wait the link ready before
use it.
Signed-off-by: Dave Young <dyoung@redhat.com>
set link up usually include two steps, ip link set <dev> up and
wait_for_if_up <dev>. Now do these two steps in one function linkup.
Later patch will add other code into it.
Signed-off-by: Dave Young <dyoung@redhat.com>
V2: merge patch 2/2
fix active-backup mode by adding slaves one by one
sync with the latest teamd
improve the comments
wait for team ports to come up
install /etc/libnl/classid too
This patch adds the initial support for team device [1].
A new cmdline team= is introduced for it.
Note, currently we don't support stacked devices
on/under team, it is tricky and can be added on request.
1. http://www.libteam.org/
Cc: Harald Hoyer <harald@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <amwang@redhat.com>
Starting with commit 24a38bc1cb dracut
uses udev builtins but still depends on >=udev-166 in dracut.spec. This
patch makes dracut work with older udev again.
All credits go to Alexander Tsoy <alexander@tsoy.me>; see
https://bugs.gentoo.org/show_bug.cgi?id=437700
This bug was reported as http://bugzilla.redhat.com/873220#c2
As the /etc/modprobe.d isn't created in the boot process
nor bundled within the initramfs, the initramfsblacklist.conf
cannot be created.
Instead, the /usr/lib/modprobe.d directory is available and using it
will restore the blacklist behavior.
Kdump module will need the drm and kms kernel modules so user can see the
emergency shell at least.
Fix this by split 50plymouth module to 50drm and 50plymouth. Moving the
installkernel part to 50drm so user can use drm directly without adding
extra plymouth utils.
Signed-off-by: Dave Young <dyoung@redhat.com>
Tested-by: Chao Wang <chaowang@redhat.com>
1) strstr " $discarduuids " did not remove the optional
'luks-' prefix from the argument as the documentation says.
2) The lookup seems backwards. $luksdev ($luks in the other code copy)
is the full uuid and thus one should check whether the user-supplied
argument (short form) is contained therein, not the other way around.
Before this commit, the only way to trigger allow-discards was to
specify the full uuid without the 'luks-' prefix.
Commit a0be1ed removes some lines from do_static() and do_ipv6auto().
When $hostname is empty, do_static() and do_ipv6auto() will return 1
and fails to run setup_net at the last of ifup.sh
Signed-off-by: WANG Chao <chaowang@redhat.com>
Harald Hoyer