parse-cmdline sets up an initial initiator-name to let iscsid start.
iscsid is started before doing any iscsistart business.
iscsistart is done with systemd-run asynchrone to do things in
paralllel. Also restarted for every new interface which shows up.
If rd.iscsi.waitnet (default) is set, iscsistart is done only
after all interfaces are up.
If not all interfaces are up and rd.iscsi.testroute (default) is set,
the route to a iscsi target IP is checked and skipped, if there is none.
If all things fail, we issue a "dummy" interface iscsiroot to retry
everything in the initqueue/timeout.
(cherry picked from commit d94050ddae)
When current dracut receives an ip with netmask of 255.255.255.255 via DHCP,
setting the also supplied default gateway fails (because it is obviously not
within the netmask).
The setup with a netmask of /32 is quite common in colocation datacenters
where you don't want the machines of two different customers to directly talk
to each other. At least two of the biggest colocation providers in Germany
(1&1 and Strato) do it that way. NetworkManager supports this kind of setup
and the dhclient-scripts of several distributions too.
In this patch I have implemented a simple approach very similar to what is
found in Debian. The dhclient-script from Fedora uses a more sophisticated
approach, but that relies on the ipcalc utility which would introduce a
dependency on Fedora-initscripts for dracut.
Signed-off-by: Gerd von Egidy <gerd.von.egidy@intra2net.com>
(cherry picked from commit 99ccbc30df)
If a daemon listens for route changes and wants to use the interface
afterwards, it should be able to resolve DNS
(cherry picked from commit 0b7bfacfea)
By default, dracut only builds in dm-service-time into the initramfs as
that is the default multipath.conf path selector. If the user changes
the path selector to "round robin" on the fly and runs dracut, multipath
does not find any paths on boot and the user will be dropped into a
shell.
Apparently, in RHEL7 dracut defaults to "hostonly" mode, i.e. modules
not currently in use at the time dracut runs do not get built into
initramfs. This is definitely one case where this doesn't work. A change
to reconfigure multipath probably should not render the system
unbootable.
https://bugzilla.redhat.com/show_bug.cgi?id=1195392
If the user pressed ESC while checkisomd5 runs the media check, it will
exit with "2". Previously that would mean, that the media check was not
successful.
(cherry picked from commit 370035d561)
The only reason we add swap devices to host-only mode (added in
dd5875499e) is to allow us to process
resume= arguments passed on the kernel command line when the swap
partition lives on something slightly more complex than a normal
partion (e.g. in an LVM or RAID setup).
By adding the device to host_devs, the necessary LVM and RAID hooks
are added and thus the underlying storage will be initialised OK, and
the 95resume module handles the waiting for the device (via udev rules
creating the /dev/resume symlink).
So ultimately, we do not need to hard-code the waiting for the swap
devices into the initramfs at build time as the waiting part can be
dynamic.
This makes things more resiliant to swap partitions disappearing and
being reformatted etc.
Inspired by a patch by Martin Whitaker on Mageia bug:
https://bugs.mageia.org/show_bug.cgi?id=12305
(cherry picked from commit 3e3ed34f03)
The fcoe-uefi module should test for EFI firmware when called
in 'hostonly' mode; of no EFI firmware is found then the module
doesn't need to be included.
References: bnc#882412
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
(cherry picked from commit 6755c20855)
rd.net.dhcp.retry=<cnt>
If this option is set, dracut will try to connect via dhcp
<cnt> times before failing. Default is 1.
rd.net.timeout.dhcp=<arg>
If this option is set, dhclient is called with "-timeout <arg>".
rd.net.timeout.iflink=<seconds>
Wait <seconds> until link shows up. Default is 60 seconds.
rd.net.timeout.ifup=<seconds>
Wait <seconds> until link has state "UP". Default is 20 seconds.
rd.net.timeout.route=<seconds>
Wait <seconds> until route shows up. Default is 20 seconds.
rd.net.timeout.ipv6dad=<seconds>
Wait <seconds> until IPv6 DAD is finished. Default is 50 seconds.
rd.net.timeout.ipv6auto=<seconds>
Wait <seconds> until IPv6 automatic addresses are assigned.
Default is 40 seconds.
rd.net.timeout.carrier=<seconds>
Wait <seconds> until carrier is recognized. Default is 5 seconds.
Instead of hardcoding a list of useful drivers, which has to be curated
all the time, just include all HID drivers.
(cherry picked from commit 180e9d7851)
Previously rd.live.fsimg only supported filesystems residing in
(compressed) archives.
Now rd.live.fsimg can also be used when a squashfs image is used.
This is achieved by extracting the rootfs image from the squashfs and
then continue with the default routines for rd.live.fsimg.
In addition some code duplication got removed and some documentation
got added.
Signed-off-by: Fabian Deutsch <fabiand@fedoraproject.org>
(cherry picked from commit b0472eac11)
We want to cleanup / after switch_root. Placing the loop files in /
works, but it is more sane to put them in /run/initramfs
(cherry picked from commit 1f8abe81a9)
This option changes the underlying mechanism for the overlay in the
dmsquash module.
Instead of a plain dm snapshot a dm thin snapshot is used. The advantage
of the thin snapshot is, that the TRIM command is recognized, which
means that at runtime, only the occupied blocks will be claimed from
memory, and freed blocks will really be freed in ram.
Signed-off-by: Fabian Deutsch <fabiand@fedoraproject.org>
(cherry picked from commit d6e34d362a)
A user can provide a filesystem image (rootfs.img) inside a compressed
tarball and that filesystem image will be mounted read/write. This provides
some benefits over a device mapper snapshot overlay, especially when the
live system becomes full. The boot command line simple needs
"rd.writable.fsimg" added to utilize this feature.
Additional documentation for this option as well as other live boot
options is included.
Signed-off-by: Major Hayden <major@mhtx.net>
(cherry picked from commit 504c0a8fec)
"ifup -m" was thought to be used by humans in the emergency shell.
Using it programatically shows some other flaw in the execution logic.
Also, "ifup -m" was configuring the interface multiple times on "add"
and "change" uevent, because the "$netif.did-setup" test was not
executed.
(cherry picked from commit 7cca5efdce)
Add new functions require_binaries() and require_any_binary() to be used
in the check() section of module-setup.sh.
These functions print a warning line telling the user, which binary is
missing for the specific dracut module.
This unifies the way of checking for binaries and makes the life of an
initramfs creator easier, if he wants to find out why a specific dracut
module is not included in the initramfs.
(cherry picked from commit 30e6e809ed)
some programs e.g. systemd-journald expect a directory in /var/log as
the marker to do some actions. Here journald tries to flush
/run/log/journal to /var/log/journal, if the directory is seen.
/var/log is now a symlink to /run/initramfs/log.
(cherry picked from commit 99d4fd6bb7)
when doing switch-root teamd gets killed, which tears down the team
interface, if teamd is not started with "-N".
(cherry picked from commit 2a12e97475)
Install ifcfg-* files with team configuration in the initramfs.
Improve the slave configuration of the team interface, by looking up
ifcfg files in the initramfs.
Create a default loadbalance team config, if none present in the
initramfs.
In the judgment sentence, it will print the following warning message,
becasuse of lacking the blank on the left of ']'.
/lib/net-lib.sh: line 110: [: missing `]'
Signed-off-by: Minfei Huang <mhuang@redhat.com>
(cherry picked from commit c440d302f1)
For targets with colons in the iSCSI target name:
"iqn.2000-09.com.foo:storage-system.e2000:00000001cm1p1"
the parser was confused with the optional iscsi_iface_name and
iscsi_netdev_name.
This patch reintroduces the old IQN, EUI and NAA parsing and enhances
the fallback parser by checking the LUN for a numerical value.
(cherry picked from commit 36e8ce4fb0)
When you define the gateway for an interface, dracut sets it up with:
ip route add default via $gw dev $netif
If a default route is already set (e.g. if you have multiple NICs), this
will fail with the message "RTNETLINK answers: File exists".
So, if your first NIC isn't usable as a default route
Using "ip route replace default" instead allows ifup/dhclient-script to
correctly change the default route to the new interface.
either by s390 SUBCHANNELS or HWADDR, if the interface name is not
persistent.
Previously, this was bound unconditionally with HWADDR.
(cherry picked from commit 80043e21c1)
nfs paths may contain spaces, make sure they are preserved when passed
to nfs_to_var and mount.
Related: rhbz#1109933
(cherry picked from commit 7e692cfd43)
When installing OS to a VLAN enabled iscsi LUN (extracted from iBFT), "/tmp/net.{xyz}.has_ibft_config" is not being set properly.
Then anaconda installer requires 'BOOTPROTO="ibft"' populated in ifcfg of the vlan interface (ex: ibft0.20), for it to properly populate the kernel parameters post installation. The setting 'BOOTPROTO="ibft"' is populated by write-ifcfg.sh script only if the corresponding interface has a file /tmp/net.{xyz}.has_inft_config
To get around this issue, in ibft_to_cmdline() function in net-lib.sh file, I made the following changes to populate the has_ibft_config file for the vlan interface(ex: ibft0.20):
(cherry picked from commit f4eb0d9804)
prompts the user for additional kernel command line parameters
(cherry picked from commit f232f6623d)
Conflicts:
dracut.cmdline.7.asc
modules.d/98systemd/dracut-cmdline.sh
modules.d/99base/init.sh
rd.iscsi.ibft[=1] should be used instead.
Thing is, 'ip=ibft' is not really an ip setting, but rather a marker
that iBFT should be evaluated.
Also removed the trigger of the warning:
"Warning: Please supply bootdev argument for multiple ip= lines"
(cherry picked from commit 5580e4c176)
When a bonded interface is brought up, any slaves included in the bond
have their hardware address set to that of the bond master. Although
this allows an interface to be brought up on start up, when the
configuration file is imported into the booted system it prevents
the bonded interface being successfully restarted.
The fix involves obtaining the hardware address of the slaves before
they are added to the bond and then using this value in the
configuration file.
(cherry picked from commit 83c9ff7dbb)
Currently the block driver detection for generic initrd doesn't include
the SD/MMC drivers so we fail to boot generic images on any device using
those platforms as boot devices when using a generic initrd. Add logic
to detect those modules. This primarily fixes embedded ARM devices but
also likely intel tablets/dev boards and enterprise hypervisors that
have the ability to boot from SD.
Also the ahci_init_controller misses a number of drivers that use the
libahci_platform module for the init so this fixes some missing achi
moduless too.
Finally it cleans up the ARM storage module hacks that the above now
deals with in a more generic manner.
Signed-off-by: <pbrobinson@gmail.com>
(cherry picked from commit 827ec27a9c)
It turns out that commit f30b74e (dracut-initqueue service runs before
remote-fs-pre.target) is partial fix for remote fs mounts. Because no
one pulls in remote-fs.target, we can never start remote fs mounts.
Now pull in remote-fs.target in dracut-pre-pivot.
Signed-off-by: WANG Chao <chaowang@redhat.com>
(cherry picked from commit ce7f408dfd)
The rootfs-generator was installed in the wrong path
in the initrd, cause it never to be run.
References: bnc#878714
Signed-off-by: Hannes Reinecke <hare@suse.de>
(cherry picked from commit ed2005fa5b)
fixes
/usr/lib/dracut/modules.d/90mdraid/module-setup.sh: line 60:
_activated["${UUID}"]: bad array subscript
Thanks to Jan ONDREJ for spotting this!
(cherry picked from commit 19bb14c346)
With the following commit, dracut doesn't mount anything from /etc/fstab
commit e920bfb
Author: WANG Chao <chaowang@redhat.com>
Date: Tue Apr 1 15:20:49 2014 +0800
fstab: do not mount and fsck from fstab if using systemd
But systemd doesn't mount nfs at all, because no unit is pulling in
remote-fs.target.
dracut must pull in these remote fs mount and all these remote mounts
should start only after network is up (ie. after dracut-initqueue).
Signed-off-by: WANG Chao <chaowang@redhat.com>
(cherry picked from commit b31250e7e6)
Before modifying 69-dm-lvm-metad.rules, we should check for the
existance first. Otherwise this results in error messages on
distributions (debian), which do not ship these rules.
(cherry picked from commit 12819a5799)
If using systemd in initramfs, we could run into a race condition when
dracut and systemd both are trying to mount and run fsck for the same
filesystem, and mount or fsck could be a failure.
To fix such failure, we should use systemd to mount/fsck from /etc/fstab
only.
v2: check $DRACUT_SYSTEMD suggested by Alexander Tsoy
Signed-off-by: WANG Chao <chaowang@redhat.com>
(cherry picked from commit e920bfb1e8)
Harald Hoyer