Basic systemd functionality is in 00systemd now.
Switching root and the initrd.target is in 00systemd-initrd.
Dracut additions to the systemd initrd are in 98dracut-systemd.
Previously rd.live.fsimg only supported filesystems residing in
(compressed) archives.
Now rd.live.fsimg can also be used when a squashfs image is used.
This is achieved by extracting the rootfs image from the squashfs and
then continue with the default routines for rd.live.fsimg.
In addition some code duplication got removed and some documentation
got added.
Signed-off-by: Fabian Deutsch <fabiand@fedoraproject.org>
This option changes the underlying mechanism for the overlay in the
dmsquash module.
Instead of a plain dm snapshot a dm thin snapshot is used. The advantage
of the thin snapshot is, that the TRIM command is recognized, which
means that at runtime, only the occupied blocks will be claimed from
memory, and freed blocks will really be freed in ram.
Signed-off-by: Fabian Deutsch <fabiand@fedoraproject.org>
Dracut will generate systemd units for additional devices that should be
brought up during boot, e.g. swap devices. These unit files are broken
symlinks with \ in the filename, e.g.
/etc/systemd/system/initrd.target.wants/dev-disk-by\x2duuid-e6a54f99\x2da4fd\x2d4931\x2da956\x2d1c642bcfee5e.device.
Both the backslash and the broken symlink causes problems for shell
scripts, [ -e "$file" ] isn't enough and read requires the additional -r
argument to not react on the \.
The function 99shutdown/shutdown.sh:_check_shutdown() assumes that
shutdown scripts report success or failure via their return value.
However, "dmsetup remove_all" always reports success, even if some
of the device mappings could not be removed.
I submitted a patch for dmsetup but the lvm2 folks rejected it,
asserting that its behaviour is correct, that "remove_all" should
only be used by developers and that the proper solution would be
to invoke "dmsetup remove" on each device. This does report success
or failure via the return value.
Apart from fixing that issue, this commit also adds the dmsetup
option "--noudevsync". Without it, dmsetup would hang after removal
of a device while trying to communicate with systemd-udevd, which
is no longer running at this shutdown stage.
[harald: replaces backticks with $() ]
The sdhci-pci module is currently not being included in the initramfs,
even though other sdhci modules are. This breaks boot on systems that
rely on this driver to access the root filesystem.
Instead of looking for modules that use sdhci_pltfm_init, look for
sdhci_add_host. I checked 3.18 kernel sources, and this change
does not remove any of the previously-matched SDHCI drivers.
It should result in the addition of sdhci-pci, sdhci-s3c, sdhci-spear
and sdhci-acpi.
For targets with colons in the iSCSI target name:
"iqn.2000-09.com.foo:storage-system.e2000:00000001cm1p1"
the parser was confused with the optional iscsi_iface_name and
iscsi_netdev_name.
This patch reintroduces the old IQN, EUI and NAA parsing and enhances
the fallback parser by checking the LUN for a numerical value.
As reported in https://bugs.mageia.org/show_bug.cgi?id=14799
the xhci module got splitted up in upstream linux merged during
3.18 release cycle:
>From 29e409f0f7613f9fd2235e41f0fa33e48e94544e Mon Sep 17 00:00:00 2001
From: Andrew Bresticker <abrestic@chromium.org>
Date: Fri, 3 Oct 2014 11:35:29 +0300
Subject: xhci: Allow xHCI drivers to be built as separate modules
so we need to adjust 90kernel-modules accordingly.
Signed-off-by: Thomas Backlund <tmb@mageia.org>
rootfs is on nbd
In not hostonly mode, require_binaries will still complain.
If in hostonly mode and the module is explicitly added via -a nbd, then
install() section will still complain later:
dracut-install: ERROR: installing 'nbd-client'
Signed-off-by: Thomas Renninger <trenn@suse.de>
95rootfs-block would not terminate the commandline parameter with
a space or newline, instead it'll rely on the main routine from
dracut.sh to do this.
Which will cause unexpected problems for any modules called
after this.
So terminate the commandline parameters correctly here and remove
the newline from dracut.sh.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
This aligns other places piping cmdline() output to cmdline.d files
with the earlier fix for 95rootfs-block.
Signed-off-by: Thorsten Behrens <tbehrens@suse.com>
Signed-off-by: Thomas Renninger <trenn@suse.de>
If there's a root fallback, at least attempt to have it falling
back to the last root filesystem this system ran off of.
Signed-off-by: Thorsten Behrens <tbehrens@suse.com>
Signed-off-by: Thomas Renninger <trenn@suse.de>
cmdline_journal does not contain linefeeds anymore, so read
silently skipped it altogether.
Signed-off-by: Thorsten Behrens <tbehrens@suse.com>
Signed-off-by: Thomas Renninger <trenn@suse.de>
nvidia driver needs this via modprobe script.
Needs to do change the group after a device node got created.
Add chown instead of chgrp which can also change the owner of a file.
Ask Stefand Dirsch <sndirsch@suse.de> for details.
Signed-off-by: Thomas Renninger <trenn@suse.de>
The module_setup.sh script was missing an '_arch' declaration,
causing network not to be installed on s390.
Signed-off-by: Thomas Renninger <trenn@suse.de>
SUSE is using specific settings for dracut, so add them
to the suse.conf.example file.
Add vi and find to the debug module add some help text to the suse.conf
file when and how to use it.
Signed-off-by: Thomas Renninger <trenn@suse.de>
lldpad is a system-wide process, which must be started only once.
So we should be separate it from fcoe-up, as it might be called
several times.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
DCB & fipvlan can only be called on real devices, not VLAN
ones. So skip any VLAN devices which might been added to the
list of network interfaces.
References: bnc#878583
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
When running with --hostonly-cmdline we should be storing
the current configuration in /etc/cmdline.d so that dracut
will be configure the system automatically.
References: bnc#877288
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
The 'create' sysfs entry has been removed for newer fcoe modules,
so just check if the module directory exists.
References: bnc#877288
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Due to some obsure reason the IFS parameter is not set correctly
when evaluating get_ibft_mod(). So change the parsing to not rely
on IFS altogether.
References: bnc#886199
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
cmdline
If the rootfs is an nfs mount, also know as nfsroot, add the correct
parameter to the dracut cmdline.
Signed-off-by: Thomas Renninger <trenn@suse.de>
In case of systemd is used the timeout already is set to 180s, compare
with file: modules.d/98systemd/dracut-initqueue.sh
Do the same if systemd is not used, e.g. in kdump case.
Signed-off-by: Thomas Renninger <trenn@suse.de>
When 'initqueue' is called with an invalid command it'll generate
invalid job scripts. This will lead to confusing error messages
later on.
So abort in these cases and print out a warning.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
If kernel cmdline has no root= provided, *and* the initrd carries
a default value, create a systemd mount unit to have it available
in /sysroot
References: bnc#855258
Signed-off-by: Thorsten Behrens <tbehrens@suse.com>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Add more corner cases from systemd's
unit_name_from_path_instance() C function.
Signed-off-by: Thorsten Behrens <tbehrens@suse.com>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Harald Hoyer