Currently the block driver detection for generic initrd doesn't include
the SD/MMC drivers so we fail to boot generic images on any device using
those platforms as boot devices when using a generic initrd. Add logic
to detect those modules. This primarily fixes embedded ARM devices but
also likely intel tablets/dev boards and enterprise hypervisors that
have the ability to boot from SD.
Also the ahci_init_controller misses a number of drivers that use the
libahci_platform module for the init so this fixes some missing achi
moduless too.
Finally it cleans up the ARM storage module hacks that the above now
deals with in a more generic manner.
Signed-off-by: <pbrobinson@gmail.com>
It turns out that commit f30b74e (dracut-initqueue service runs before
remote-fs-pre.target) is partial fix for remote fs mounts. Because no
one pulls in remote-fs.target, we can never start remote fs mounts.
Now pull in remote-fs.target in dracut-pre-pivot.
Signed-off-by: WANG Chao <chaowang@redhat.com>
cmdline() prints empty "resume=" options for non-persistent swap
devices, for example zram. Add a check for that.
This patch also fixes printf formatting and removes unused variables.
Without the 59-scsi-sg3_utils.rules udev-rule a couple of devices are missing
in /dev/disk/by-id.
If the luks device is specified by-id in /etc/crypttab and rd.luks.uuid not
passed as a commandline parameter during boot, systemd tries to start its
crypto services which depend on those missing devices until it times out and
exits to dracut rescue shell.
Signed-off-by: Julian Wolf <juwolf@suse.com>
The rootfs-generator was installed in the wrong path
in the initrd, cause it never to be run.
References: bnc#878714
Signed-off-by: Hannes Reinecke <hare@suse.de>
By convention, strstr should be a literal string match. Previously, it
would match as a glob pattern. Some code used that, so add new
functions strglob and strglobin to do what that code expects, and
specify them tightly too. strglob tests whether the glob pattern
matches the entire string (the name strglob is also used in the yorick
language, and that's what it does there), while strglobin tests whether
the glob pattern matches anywhere in the string.
Also tightens str_starts, str_ends, and str_replace to deal with
literal strings only. In a quick grep I did not find code that depended
on these functions matching globs.
Changes the call sites where strstr was used with glob patterns to use
strglobin or strglob as the intention seemed to be (or, in one case,
strstr with the * removed as it did not affect the result anyway).
With the following commit, dracut doesn't mount anything from /etc/fstab
commit e920bfb
Author: WANG Chao <chaowang@redhat.com>
Date: Tue Apr 1 15:20:49 2014 +0800
fstab: do not mount and fsck from fstab if using systemd
But systemd doesn't mount nfs at all, because no unit is pulling in
remote-fs.target.
dracut must pull in these remote fs mount and all these remote mounts
should start only after network is up (ie. after dracut-initqueue).
Signed-off-by: WANG Chao <chaowang@redhat.com>
Before modifying 69-dm-lvm-metad.rules, we should check for the
existance first. Otherwise this results in error messages on
distributions (debian), which do not ship these rules.
If using systemd in initramfs, we could run into a race condition when
dracut and systemd both are trying to mount and run fsck for the same
filesystem, and mount or fsck could be a failure.
To fix such failure, we should use systemd to mount/fsck from /etc/fstab
only.
v2: check $DRACUT_SYSTEMD suggested by Alexander Tsoy
Signed-off-by: WANG Chao <chaowang@redhat.com>
--hostonly-cmdline:
Store kernel command line arguments needed in the initramfs
--no-hostonly-cmdline:
Do not store kernel command line arguments needed in the initramfs
The variable that dhclient sets doesn't have dhcp in the name. This
could cause problems with setups where the server is not the same as the
dhcp server.
Add new functions require_binaries() and require_any_binary() to be used
in the check() section of module-setup.sh.
These functions print a warning line telling the user, which binary is
missing for the specific dracut module.
This unifies the way of checking for binaries and makes the life of an
initramfs creator easier, if he wants to find out why a specific dracut
module is not included in the initramfs.
Libcurl has wider capabilities than those assigned to it by Dracut.
In this patch to url-lib I've added registration for TFTP URLs,
which I've found to be useful.
Enjoy,
Stig Telfer
It appears there is a simple substitution error in the pidof shell function which causes it to fail to find processes. In my case, processes started by 95nfs are not terminated in the cleanup hook. This causes knock-on effects disturbing the root filesystem service dependencies.
Enjoy,
Stig Telfer
The dracut dhclient-script.sh should set address lifetimes to the DHCP
lease time, so that other stuff (like NetworkManager!) knows that the
address is temporary and was created by DHCP.
https://bugzilla.redhat.com/show_bug.cgi?id=1058519
If a non-default device mapper name is used for an encrypted partion is
used, (i.e. not luks-$UUID) due to parsing of /etc/crypttab, then the
short-circuits put in place to prevent asking the password twice do not
work.
This would not normally be an issue as the settled job itself should be
removed after it has run and thus cannot be run again. Sadly, due to
the corresponding udev rule using ACTION="add|changed", and the fact
that trying to unlock the device (whether successful or not) seems to
trigger a changed event, it means the settled job is recreated with
each itteration thus causing the whole loop to run again.
It is this situation that the short-circuit exits would normally come
into play but sadly do not work when non-standard names are used.
By the time the /tmp/cryptroot-asked-$2 file is written near the end of
the script, the value of $2 has already been lost due to the argument
parsing code's use of 'shift'. So while on systems where the default
name is used are protected by checking /dev/mapper/xxxx, the
/tmp/cryptroot-asked-$2 file didn't help on systems where this was not
used due to this bug.
So this commit shuffles things around somewhat such that:
1. The /dev/mapper/xxxx device is checked *after* resolving $2 (which
contains the default name) to whatever /etc/crypttab specifies.
2. The cryptroot-asked-xxxx file also uses the translated name both
for the initial check and to flag when it's written.
As a separate fix, it might make sense to change the udev rule to only
act on add events rather than add|change events, but I'm not sure of the
ramifications of such a change and there may be cases where the add
event is missed and thus the change event needs to be included.
Systemd tries to load this modules very early.
Even though they are not strictly required it it is a good
thing to have them around.
[Edited-by: Harald Hoyer: moved to installkernel() ]
Peter Robinson