Allow overriding the systemctl command for sysroot with $SYSTEMCTL
Modified every modules' module-setup.sh to use the envvar instead
of the hardcoded command name.
Signed-off-by: Zoltán Böszörményi <zboszor@pr.hu>
From shellcheck:
/usr/lib/dracut/modules.d/90multipath/multipathd.sh:3:32: warning[SC2039]: In POSIX sh, == in place of = is undefined.
/usr/lib/dracut/modules.d/90multipath/multipathd.sh:3:32: warning[SC2193]: The arguments to this comparison can never be equal.
dracutinstall picks up interpreters and includes bash despite
the users' wishes or expectations, as modules should not require
bashisms at runtime.
Fixes#951
Add support for 'rd.multipath=default' for using the default
configuration on boot. The intended purpose for this is to help support
ostree-based image boots from multipathed devices (such as Fedora and
Red Hat CoreOS).
multipath requires kpartx to activate device mapper.
But kpartx is only a recommend dependency.
Check for kpartx's existent first.
Signed-off-by: Doan Tran Cong Danh <congdanhqx@gmail.com>
For the shell scripts, new environment variables were introduced.
dracutsysrootdir is the root directory, file existence checks use it.
DRACUT_LDCONFIG can override ldconfig with a different one that works
on the sysroot with foreign binaries.
DRACUT_LDD can override ldd with a different one that works
with foreign binaries.
DRACUT_TESTBIN can override /bin/sh. A cross-compiled sysroot
may use symlinks that are valid only when running on the target
so a real file must be provided that exist in the sysroot.
DRACUT_INSTALL now supports debugging dracut-install in itself
when run by dracut but without debugging the dracut scripts.
E.g. DRACUT_INSTALL="valgrind dracut-install or
DRACUT_INSTALL="dracut-install --debug".
DRACUT_COMPRESS_BZIP2, DRACUT_COMPRESS_LBZIP2, DRACUT_COMPRESS_LZMA,
DRACUT_COMPRESS_XZ, DRACUT_COMPRESS_GZIP, DRACUT_COMPRESS_PIGZ,
DRACUT_COMPRESS_LZOP, DRACUT_COMPRESS_ZSTD, DRACUT_COMPRESS_LZ4,
DRACUT_COMPRESS_CAT: All of the compression utilities may be
overridden, to support the native binaries in non-standard places.
DRACUT_ARCH overrides "uname -m".
SYSTEMD_VERSION overrides "systemd --version".
The dracut-install utility was overhauled to support sysroot via
a new option -r and fixes for clang-analyze. It supports
cross-compiler-ldd from
https://gist.github.com/jerome-pouiller/c403786c1394f53f44a3b61214489e6f
DRACUT_INSTALL_PATH was introduced so dracut-install can work with
a different PATH. In a cross-compiled environment (e.g. Yocto), PATH
points to natively built binaries that are not in the host's /bin,
/usr/bin, etc. dracut-install still needs plain /bin and /usr/bin
that are relative to the cross-compiled sysroot.
The hashmap pool allocate_tile/deallocate_tile code was removed
because clang-analyze showed errors in it. hashmap_copy was removed
because it wasn't used and clang-analyze showed errors in it.
DRACUT_INSTALL_LOG_TARGET and DRACUT_INSTALL_LOG_LEVEL were
introduced so dracut-install can use different settings from
DRACUT_LOG_TARGET and DRACUT_LOG_LEVEL.
Signed-off-by: Böszörményi Zoltán <zboszor@pr.hu>
This commit basically reverts 5ce7cc73
90-multipath-hostonly module was added in 5ce7cc73, because if hostonly
mode is enabled, multipath module will always hardcode wwids which
causes problems when the initramfs is cloned to another system with same
hardware.
Now with tri-state hostonly mode, the two modules could be merged and only
hardcode wwids when "strict" hostonly mode is enabled.
As the 'multipath' program will be triggered directly from
udev events it will be called before the multipath service
unit has started up. Which means we cannot rely on the
service unit to load the module for us, but we rather
have to do it early before udev is started.
References: bsc#986734
Signed-off-by: Hannes Reinecke <hare@suse.com>
local-fs-pre.target serves as a separator between the code for
detecting block devices and systemd's fsck/mount logic. This
patch ensures that multipathd is started before local-fs-pre.target
in the initrd. By adding a "Wants=" line for local-fs-pre.target,
it makes sure that this target is started at all.
References: bsc#1006118
Signed-off-by: Martin Wilck <mwilck@suse.de>
===================================================================
SLES11 provided a kernel commandline option 'multipath=off',
so dracut should be parsing the option, too.
References: bsc#1001691
Signed-off-by: Hannes Reinecke <hare@suse.com>
As the device-mapper module is removing all device-mapper tables
during shutdown we need to make sure to disable queuing on the
multipath devices; otherwise there might still be I/O pending
and the removal will fail.
References: bsc#994860
Signed-off-by: Hannes Reinecke <hare@suse.com>
We need to wait until udev has processed all events, otherwise we'll
risk of misdetecting devices. This might cause a temporary interruption
during which multipath removes a device-mapper device, which then
causes a booting failure.
References: bsc#986734
Signed-off-by: Hannes Reinecke <hare@suse.com>
References: bsc#930019
If rootfs is on multipath, but platform does not have an /etc/multipath.conf
file which is not urgently needed, they system will not boot, due to:
multipathd is not started and rootfs and swap are not found:
systemctl status multipathd.service
* multipathd.service - Device-Mapper Multipath Device Controller
Loaded: loaded (/usr/lib/systemd/system/multipathd.service; disabled; vendor preset: enabled)
Active: inactive (dead)
Condition: start condition failed at Thu 2015-05-07 11:49:11 CEST; 7min ago
ConditionPathExists=/etc/multipath.conf was not met
and exit to dracut shell.
Although no device uses multipath, the module checks
for presence of the multipath binary first, printing a
warning if not present. This patch fixes the wrong ordering.
hardcoding the wwid of the drives in the initramfs causes problems
when the drives are cloned to a system with the same hardware, but
different disk wwid's
https://bugzilla.redhat.com/show_bug.cgi?id=1457311
* Multipath device names only start with the mpath-prefix if the option
use_userfriendly_names is set true in /etc/multipath.conf and if user
has not set any aliases in the said file. Thus the for-loop should go
through all files in /dev/mapper/, not just ones starting with 'mpath'
* Bash is perfectly capable to extend `/dev/mapper/*` notation without a
need to pass it to an external ls
* Changed the function to use a local variable $_dev instead of the
global $dev, which seemed to be the original intention as the local
_dev was defined but not used
By default, dracut only builds in dm-service-time into the initramfs as
that is the default multipath.conf path selector. If the user changes
the path selector to "round robin" on the fly and runs dracut, multipath
does not find any paths on boot and the user will be dropped into a
shell.
Apparently, in RHEL7 dracut defaults to "hostonly" mode, i.e. modules
not currently in use at the time dracut runs do not get built into
initramfs. This is definitely one case where this doesn't work. A change
to reconfigure multipath probably should not render the system
unbootable.
https://bugzilla.redhat.com/show_bug.cgi?id=1195392
(cherry picked from commit f11d7a81e2)
For large machine, suppose there's a lot of multipath devices, multipath layer
will use a lot of memory. For kdump kernel memory is very limited thus it causes
oom. To avoid oom, we only add necessary multipath devices in kdump kernel
multipath.conf.
This is done by use mpathconf --allow, a new option which is like whitelist.
Signed-off-by: Dave Young <dyoung@redhat.com>
The multipath and kpartx rules have different numbers in SUSE.
The 11-dm-mpath.rules file had been missing, causing
blacklisting to not work properly.
References: bnc#873151, bnc#872662, bnc#883149
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
The multipathd package might install a service and a socket
file. Using the original service file from the installed
system without the socket file triggers a bug in systemd,
causing systemd to crash.
As we don't actually need to socket file in the initrd we
should be installing our own service file which does not
reference the socket file at all.
References: bnc#871610
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
The device handler modules need to be loaded early during boot
to avoid I/O errors being printed to the system log.
References: bnc#871617
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
multipathd is using pthreads, which require libgcc_s for
pthread_cancel to work. Without it multipathd might crash
with SIGABRT.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Add new functions require_binaries() and require_any_binary() to be used
in the check() section of module-setup.sh.
These functions print a warning line telling the user, which binary is
missing for the specific dracut module.
This unifies the way of checking for binaries and makes the life of an
initramfs creator easier, if he wants to find out why a specific dracut
module is not included in the initramfs.
For lvm, multipath, iscsi modules they do not care about the filesystem,
Also there could be devcie in host_devs but it does not get formated.
For these kind of modules, use for_each_host_dev_and_slaves will be better than use
for_each_host_dev_fs, here add a new function to iterate the host_devs and
their slave devices.
In original for_each_host_dev_fs, it will call check_block_and_slaves which
will return once helper function return 0, but this is not enough for kdump
iscsi setup. For kdump iscsi case, it need setup each slave devices so that
the iscsi target can be properly setuped in initramfs.
Thus, this patch also add new functions check_block_and_slaves_all and
for_each_host_dev_and_slaves_all.
Signed-off-by: Dave Young <dyoung@redhat.com>
Tested-by: WANG Chao <chaowang@redhat.com>
A multipath partition's uuid will be presented like:
# cat /sys/dev/block/$_dev/dm/uuid
part1-mpath-360060e801047103004f2c4b300000008
So in this case, change the match regexp from '^mpath-' to 'mpath-'.
Signed-off-by: Chao Wang <chaowang@redhat.com>
Harald Hoyer