Kdump dracut hooks need to enter emergency shell, currently it directly call
"sh -i -l", with recent dracut this does not work anymore without proper ctty.
It will be convinient to seperate a standalone function _emergency_shell for
dracut modules to call.
find_mount is really the same thing as ismounted with two additions:
1) uses "readlink" so "ismounted /dev/disk/by-label/LABEL" works
2) returns the mountpoint of the device
And ismounted is now just "find_mount $dev >/dev/null".
rflags is no longer guaranteed to be non empty. / is mounted according
to rootflags parameter but forced ro at first. Later it is remounted
according to /etc/fstab + rootflags parameter and "ro"/"rw". If
parameters are still the same as for first mount, / isn't remounted.
Conflicts:
modules.d/95rootfs-block/mount-root.sh
modules.d/99base/parse-root-opts.sh
wait_for_loginit ends the log; this is unhelpful if you're using
emergency_shell to do debugging.
Just leave loginit running. It doesn't hurt anything.
copytree() recursively copies the contents of SRC into DEST.
If DEST doesn't exist it is created; if it exists the contents of SRC
get merged into it (duplicate files are overwritten).
If you unset CMDLINE to make _getcmdline re-read /etc/cmdline and
/etc/cmdline.d/*, CMDLINE_ETC and CMDLINE_ETC_D would keep their
contents.
This is a serious problem if you have (e.g.) "ip=eth0:dhcp" in
/etc/cmdline.d/net.conf, because getargs ip= will return
"ip=eth0:dhcp ip=eth0:dhcp" and then parse-ip-opts.sh will die() because
you have two configurations for eth0.
Sometimes some hook script will need to be before the cleanup hook scripts
For example dhclient killing, nfs cleanup, etc. must not happen before kdump
because it will use their fuctionalities.
So here introduce a new hook pre-pivot-cleanup, all cleanup scripts will go there.
that means pre-pivot hook is splited to two hooks pre-pivot and pre-pivot-cleanup
Signed-off-by: Dave Young <dyoung@redhat.com>
According to its comment in dracut-lib.sh:
splitsep ":" "one:all:the:rest" one two
should set two="all:the:rest". But there's no check to see if the
current field is the last field, so it just gets "all".
"export -n" is a bash extension, not part of POSIX, and is hence
incompatible with the busybox shell.
This was breaking boot when the busybox module was used.
Reimplement the scope change in a few lines of standard shell code.
wait_for_loginit does set +x (to turn off debugging temporarily), but
sometimes it would return before turning it back on. Move the set +x
line to fix that, then use 'setdebug' to make sure we don't turn it back
on unless it was needed.
The "online" hook runs whenever a network interface comes online (that
is, once it's actually up and configured).
The initqueue --env argument is used to set "$netif" to the name of the
newly-online network interface.
Manually setuping nic through udev is not always done when
we want network access. Here add a function wait_for_route_ok to
wait and make sure the network is accesible
[v1 -> v2]:
Harald: don't use bash syntax
Add check for [ -n "$li" ] because `ip route show` will show nothing probably
Signed-off-by: Dave Young <dyoung@redhat.com>
if you add realinitpath="<path1> <path2>" to dracut.conf, then it will
be written to $initdir/etc/cmdline.d/distroinit.conf with
"rd.distroinit=<path1> rd.distroinit=<path2>" and evaluated by
99base/init, when it searches for init.
Option --ctty will optionally add setsid binary to dracut's image.
During runtime, if rd.ctty is set and is a character device,
emergency shells will be spawned with job control.
in case no ctty was provided, shell was spawned without caring about
/dev/console. Also, the ctty is more opportunistic. If the image was
generated with --ctty, we will fallback to /dev/tty1 if rc.ctty is
invalid or missing. Otherwise we spawn standard shell on /dev/console
[dyoung@redhat.com: Rebased to usrmove branch]
Signed-off-by: Michal Soltys <soltys@ziu.info>
Signed-off-by: Dave Young <dyoung@redhat.com>
ssh module will need root user in /etc/passwd, so add root and nobody
to /etc/passwd in 99base instead of nfs module
Signed-off-by: Dave Young <dyoung@redhat.com>
When the initqueue cannot be processed, it might be about an invalid
root device (in which case a separate message produced via
wait_for_dev() should be displayed anyway), but it could also
be for any other reason (e.g. /dev/resume not existing).
Therefore, it is best to use a more generic error message.
Also a minor tab->space conversion in the near vacinity of
the real change.
This commit allows the waiting for a device to be cancelled.
When the resume partition does not exist, it becomes quite hard
to work out what to do (you have to either create the
/dev/resume symlink manually, or remove the 'finished' job
that is waiting for it). Additionally dracut incorrectly
displays a message about not being able to find the root
device, which is bogus and misleading.
This commit should just bail on the whole resume thing
if the device cannot be found and proceed with a normal boot.
inst_mount_hook <mountpoint> <prio> <name> <script>
Install a mount hook with priority <prio>,
which executes <script> as soon as <mountpoint> is mounted.
add_mount_point <dev> <mountpoint> <filesystem> <fsopts>
Mount <dev> on <mountpoint> with <filesystem> and <fsopts>
and call any mount hooks, as soon, as it is mounted
This is from the following thread:
http://thread.gmane.org/gmane.linux.raid/35753/focus=35795
Additional tests + more specific info.
Signed-off-by: Michal Soltys <soltys@ziu.info>
[harald@redhat.com: usable_root(): relaxed check for root]
The "read" shell builtin consumes backslashes, which is a problem if
your root device is something like "LABEL=Fedora\x2016".
Using "read -r" tells the shell to leave backslashes alone.
Whitespace removal in:
out="${out}${chop# }$r"
will damage certain strings, for example the following call:
str_replace ' aax aaxaa' x y
would return 'aayaayaa' instead of ' aay aayaa'.
Signed-off-by: Michal Soltys <soltys@ziu.info>
To not pollute dracut-lib.sh, all the fsck related functions were moved
to fs-lib.sh. The functions available are as follows:
- fsck_single
this will detect/verify filesystem, check if it has necessary tools and
check the filesystem respecting additional flags (if any), using
specific "driver" (or falling back to generic one). Currently
available: fsck_drv_{com,xfs,std}. 'com' is used for tools following
typical subset of options/return codes (e.g. ext, jfs), 'std' is used
for "unknown" fs and doesn't assume it can be run non-interactively.
Please see comments around the code for more info.
- fsck_batch
this will check provided list of the devices;
Both of the above functions will fake empty fstab, to make generic fsck
not complain too much (excact devices are always provided on the command
line).
"Known" filesystems currently: ext234, reiser, jfs, xfs
- det_fs
Small bug fixed - as this function is meant to be called in $(), it may
not be verbose.
Current behaviour is:
- if detection is successful, use its result
- if detection is not successful, and filesystem is provided, return
the provided one; otherwise use auto
if a value of a key on the kernel command line includes wildcards, these
would be expanded.
E.g., if you have "key=/dev/sd*" the value would be substituted with
"/dev/sda /dev/sda1 /dev/sda2" instead of returning "/dev/sd*"
Mount the securityfs filesystem and make available its location through the
exported variable SECURITYFSDIR.
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Acked-by: Gianluca Ramunno <ramunno@polito.it>
Both functions will be used by rootfs-block and fstab-sys modules.
Both are based on code present in mount-root.sh, though few changes are
present.
det_fs:
will try to determine filesystem type for supplied device, even if it's
not auto. If fs cannot be detected, or if the detected one differs from
the supplied one - a warning is issued (so user can fix its stuff later)
wrap_fsck:
will call fsck for specific device with optionally additional
fsckoptions. The function returns fsck return value.
Signed-off-by: Michal Soltys <soltys@ziu.info>
If /proc/cmdline is empty (like if root=... is set in /etc/cmdline),
modules.d/99base/init will crash with a message saying "can't shift that
many" right before switch_root. The problem is in the block of code that
tries to look for init args. It does something like:
read CMDLINE </proc/cmdline
[...]
set $CMDLINE
shift
If CMDLINE="" then "set $CMDLINE" will dump all the variables to stdout.
(That should be "set -- $CMDLINE" instead.) Since there's no $1, the
"shift" causes an error, and dracut crashes.
The 'shift' was copy-and-pasted from the previous block. It doesn't
belong here; remove it.
[Harald Hoyer <harald@redhat.com>: corrected commit message]
[Harald Hoyer <harald@redhat.com>: fixed indention]
Signed-off-by: Will Woods <wwoods@redhat.com>
Given that we boot into a modern Linux distribution with the "/run" toplevel
directory, we can easily mount move the whole /run directory to the real
root in the end and have the complete initramfs later on in
/run/initramfs. All log files and /run states are still accessible and
to save space /run/initramfs can be removed later on.
Because the kernel does not mount a tmpfs on /run prior to unpacking the
initramfs cpio image, we have to copy ourselves very early to a tmpfs
and mount it on /run.
Due to lazy umount the old initramfs binaries should
be removed in the end by switch_root.
This feature can be turned on with "--prefix".
This adds the following parameters:
rd.caps=1
turn the caps module on/off
rd.caps.initdrop=cap_sys_module,cap_sys_rawio
drop the specified comma seperated capabilities
rd.caps.disablemodules=1
turn off module loading
rd.caps.disablekexec=1
turn off the kexec functionality
If module loading is turned off, all modules have to be loaded in the
initramfs, which are used later on. This can be done with
"rd.driver.pre="
rd.driver.pre=autofs4,sunrpc,ipt_REJECT,nf_conntrack_ipv4,....
Because the kernel command line would get huge with all those drivers, I
recommend to make use of $initramfs/etc/cmdline.
So, all rd.caps.* and rd.driver.pre arguments are in caps.conf can be
copied to $initramfs/etc/cmdline with "-i caps.conf /etc/cmdline".
Also all modules have to be loaded in the initramfs via "--add-drivers".
The resulting initramfs creation would look like this:
--add-drivers "autofs4 sunrpc ipt_REJECT nf_conntrack_ipv4 \
nf_defrag_ipv4 iptable_filter ip_tables
ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack
ip6table_filter ip6_tables dm_mirror dm_region_hash dm_log uinput ppdev
parport_pc parport ipv6 sg 8139too 8139cp mii i2c_piix4 i2c_core ext3
jbd mbcache sd_mod crc_t10dif sr_mod cdrom ata_generic pata_acpi ata_piix
dm_mod" \
/boot/initramfs-caps.img
We want all "/var/run" information to live in /dev/.run, until the real
root is mounted.
Therefore we mount a tmpfs on /dev/.run, which can/will be bind/move mounted
on /var/run later on.
New:
str_starts, str_replace
funiq - print new unique file name
mkuniqdir - create and print new unique dir
splitsep - splits given string 'str' with separator 'sep' into vars
udevmatch - create udev rule match for a device
Modified:
foreach_uuid_until - use $___ as a place holder
Harald Hoyer