rd.net.dhcp.retry=<cnt>
If this option is set, dracut will try to connect via dhcp
<cnt> times before failing. Default is 1.
rd.net.timeout.dhcp=<arg>
If this option is set, dhclient is called with "-timeout <arg>".
rd.net.timeout.iflink=<seconds>
Wait <seconds> until link shows up. Default is 60 seconds.
rd.net.timeout.ifup=<seconds>
Wait <seconds> until link has state "UP". Default is 20 seconds.
rd.net.timeout.route=<seconds>
Wait <seconds> until route shows up. Default is 20 seconds.
rd.net.timeout.ipv6dad=<seconds>
Wait <seconds> until IPv6 DAD is finished. Default is 50 seconds.
rd.net.timeout.ipv6auto=<seconds>
Wait <seconds> until IPv6 automatic addresses are assigned.
Default is 40 seconds.
rd.net.timeout.carrier=<seconds>
Wait <seconds> until carrier is recognized. Default is 5 seconds.
(cherry picked from commit d8ad687e1a)
Some hosting providers need a static route set in order to be
able to reach the default gateway. Be sure to retry adding
the default gateway after setting the static routes.
"ifup -m" was thought to be used by humans in the emergency shell.
Using it programatically shows some other flaw in the execution logic.
Also, "ifup -m" was configuring the interface multiple times on "add"
and "change" uevent, because the "$netif.did-setup" test was not
executed.
When current dracut receives an ip with netmask of 255.255.255.255 via DHCP,
setting the also supplied default gateway fails (because it is obviously not
within the netmask).
The setup with a netmask of /32 is quite common in colocation datacenters
where you don't want the machines of two different customers to directly talk
to each other. At least two of the biggest colocation providers in Germany
(1&1 and Strato) do it that way. NetworkManager supports this kind of setup
and the dhclient-scripts of several distributions too.
In this patch I have implemented a simple approach very similar to what is
found in Debian. The dhclient-script from Fedora uses a more sophisticated
approach, but that relies on the ipcalc utility which would introduce a
dependency on Fedora-initscripts for dracut.
Signed-off-by: Gerd von Egidy <gerd.von.egidy@intra2net.com>
For targets with colons in the iSCSI target name:
"iqn.2000-09.com.foo:storage-system.e2000:00000001cm1p1"
the parser was confused with the optional iscsi_iface_name and
iscsi_netdev_name.
This patch reintroduces the old IQN, EUI and NAA parsing and enhances
the fallback parser by checking the LUN for a numerical value.
The module_setup.sh script was missing an '_arch' declaration,
causing network not to be installed on s390.
Signed-off-by: Thomas Renninger <trenn@suse.de>
In the judgment sentence, it will print the following warning message,
becasuse of lacking the blank on the left of ']'.
/lib/net-lib.sh: line 110: [: missing `]'
Signed-off-by: Minfei Huang <mhuang@redhat.com>
It is not available to valid the customize dhcp config
/etc/dhclient.conf in the initram environment.
Dracut uses the default follow config to construct the initramfs.
request subnet-mask, broadcast-address, time-offset, routers,
domain-name, domain-name-servers, domain-search, host-name,
root-path, interface-mtu;
Copy the customize config to make the config availably in the
initram environment.
Signed-off-by: Minfei Huang <mhuang@redhat.com>
When you define the gateway for an interface, dracut sets it up with:
ip route add default via $gw dev $netif
If a default route is already set (e.g. if you have multiple NICs), this
will fail with the message "RTNETLINK answers: File exists".
So, if your first NIC isn't usable as a default route
Using "ip route replace default" instead allows ifup/dhclient-script to
correctly change the default route to the new interface.
When installing OS to a VLAN enabled iscsi LUN (extracted from iBFT), "/tmp/net.{xyz}.has_ibft_config" is not being set properly.
Then anaconda installer requires 'BOOTPROTO="ibft"' populated in ifcfg of the vlan interface (ex: ibft0.20), for it to properly populate the kernel parameters post installation. The setting 'BOOTPROTO="ibft"' is populated by write-ifcfg.sh script only if the corresponding interface has a file /tmp/net.{xyz}.has_inft_config
To get around this issue, in ibft_to_cmdline() function in net-lib.sh file, I made the following changes to populate the has_ibft_config file for the vlan interface(ex: ibft0.20):
rd.iscsi.ibft[=1] should be used instead.
Thing is, 'ip=ibft' is not really an ip setting, but rather a marker
that iBFT should be evaluated.
Also removed the trigger of the warning:
"Warning: Please supply bootdev argument for multiple ip= lines"
When a bonded interface is brought up, any slaves included in the bond
have their hardware address set to that of the bond master. Although
this allows an interface to be brought up on start up, when the
configuration file is imported into the booted system it prevents
the bonded interface being successfully restarted.
The fix involves obtaining the hardware address of the slaves before
they are added to the bond and then using this value in the
configuration file.
By convention, strstr should be a literal string match. Previously, it
would match as a glob pattern. Some code used that, so add new
functions strglob and strglobin to do what that code expects, and
specify them tightly too. strglob tests whether the glob pattern
matches the entire string (the name strglob is also used in the yorick
language, and that's what it does there), while strglobin tests whether
the glob pattern matches anywhere in the string.
Also tightens str_starts, str_ends, and str_replace to deal with
literal strings only. In a quick grep I did not find code that depended
on these functions matching globs.
Changes the call sites where strstr was used with glob patterns to use
strglobin or strglob as the intention seemed to be (or, in one case,
strstr with the * removed as it did not affect the result anyway).
Add new functions require_binaries() and require_any_binary() to be used
in the check() section of module-setup.sh.
These functions print a warning line telling the user, which binary is
missing for the specific dracut module.
This unifies the way of checking for binaries and makes the life of an
initramfs creator easier, if he wants to find out why a specific dracut
module is not included in the initramfs.
The dracut dhclient-script.sh should set address lifetimes to the DHCP
lease time, so that other stuff (like NetworkManager!) knows that the
address is temporary and was created by DHCP.
https://bugzilla.redhat.com/show_bug.cgi?id=1058519
Configure cmdline to:
ip=br0:dhcp bridge=br0:bond0 bond=bond0:eth0
By default ifup bond0 will run dhcp on bond0, which is wrong. bond0
isn't the top interface. we should really run dhcp on br0.
So if we ifup an network interface on secondary stack, we should not
dhcp. Fix this issue with this patch.
Previously if "$rootok" = 1, parsing of netroot command line arguments
was skipped. For multiple netroot arguments, all parse scripts have to
run.
Previously only the first netroot argument was taken into account for
the parsing scripts. Now every netroot argument is processed.
Fix 3 issues in ibft_to_cmdline():
- unset local variables at the beginning of each loop
- only write vlan.conf when we write out ip=xxx
- when vlan id is 0, don't write out vlan.conf. Because 0 means untagged
and we don't actually need vlan interface.
We only wait for master interfaces for bridge/bonding/team/vlan case.
If none of these complex network is configured, we should wait for
ethernet interface (bootdev) instead.
configured_ifaces is a function that returns the names of each interface
that the user wanted configured.
Currently, this is accomplished by reading the list from
/tmp/net.ifaces. But if we want to allow the user to specify an
interface by its MAC address or IP or something, we need a function that
will read the cache and convert the MACs etc. to names.
(Obviously this conversion only works once udev starts, so it will warn
you if you try it too early.)
Now that we can use a MAC as a device identifier, we can just bring up
the device specified by BOOTIF as a normal interface.
So instead of ignoring everything but BOOTIF, we'll put BOOTIF in the
IFACES list and bring it up as normal, defaulting to DHCP if nothing
else is specified.
We can also handle anaconda-style 'ksdevice=bootif' this way.
A MAC address is a unique identifier for a particular network interface.
We can use the MAC to generate udev rules to bring up that interface,
like we currently do with BOOTIF.
This patch allows interfaces to be specified as a MAC address, either
in the usual colon-separated form or the PXE-style dash-separated form.
(The latter is more useful on the commandline, since it allows for
arguments like: "ip=77-77-6f-6f-64-73:dhcp")
This is useful since it's common for a user who is booting a new OS for
the first time to know the MAC of the device, but not know what the
kernel name will be.
Currently dracut only support 1 bond, namyly bond0 by default. However multiple
bonds configuration may be needed. For example in kdump, in 1st kernel, more
than one bonds may be configured, and bondX other than bond0 is used as output
interface to remote host which will store dump core. This patch can solve this
problem, to write real bond information to initramfs, 2nd kdump kernel will
use it to create the relevant bondX interface.
Tested-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Baoquan He <bhe@redhat.com>
Team is the same network stack as bonding. Therefore give ifup the ability to
handle bridge over team and vlan tagged team as bonding too.
Signed-off-by: WANG Chao <chaowang@redhat.com>
To use vlan for net boot, you need to specify vlan and ip kernel options
for the boot interface. For example,
vlan=eth1.1:eth1 bootdev=eth1.1
ip=1.2.3.4:1.2.3.4::255.255.255.0:my-hostname:eth1:none
To use bridge for net boot, you need to specify bridge and ip kernel
option for the boot interface. For example
bridge=br1:eth1 bootdev=br1
ip=1.2.3.4:1.2.3.4::255.255.255.0:my-hostname:eth1:none
In my environment, I needs to boot machines from network within
a vlan or on a bridged network. I found curent dracut release
if-up.sh script in 40network module bypass ip setting for both
bridge and vlan interface.
linkup is a wrapper function for waiting interface ready and up.
change to use linkup as what we do in ifup script.
Signed-off-by: Dave Young <dyoung@redhat.com>
In case that configuration file did not include name of team device,
teamd would not start. Fix this by adding "-t" parameter.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
In case long delay of network driver initqueue will exit before net dev is
ready. We have no chance to setup it then.
For dhcp, when we finish the setup there will be a setup_net_<dev>.ok. Doing
same for static ip case. Also add a check to initqueue when we generate udev
rules to ensure it's early enough.
[v1->v2]: only wait for bootdev or it's possible to cause boot fail for
waiting for non-bootdev. For example bond0->eth0, set bond0 as bootdev and
dhcp, we only need to wait bond0 setup ok.
Signed-off-by: Dave Young <dyoung@redhat.com>
In case BOOTIF is not set and IFACES are not set in bonding/vlan/bridge code,
net-genrule.sh will fall to bring up all net interfaces.
Here add a failsafe option to read IFACES from /tmp/net.ifaces
[v1->v2]: move IFACES reading from net.ifaces after bonding/vlan/bridge info
code chunks.
[v2->v3]: [ -n "$IFACES" ] should be [ -z "$IFACES" ]
Signed-off-by: Dave Young <dyoung@redhat.com>
Some network driver will take long time to initialize. We have an example
in a HP machine which take about one minute for this. The callback such as
"ip link set <dev> up" will fail, afterwards setup for network will also
fail.
Fix this by add a new function wait_for_if_link, wait the link ready before
use it.
Signed-off-by: Dave Young <dyoung@redhat.com>
set link up usually include two steps, ip link set <dev> up and
wait_for_if_up <dev>. Now do these two steps in one function linkup.
Later patch will add other code into it.
Signed-off-by: Dave Young <dyoung@redhat.com>
V2: merge patch 2/2
fix active-backup mode by adding slaves one by one
sync with the latest teamd
improve the comments
wait for team ports to come up
install /etc/libnl/classid too
This patch adds the initial support for team device [1].
A new cmdline team= is introduced for it.
Note, currently we don't support stacked devices
on/under team, it is tricky and can be added on request.
1. http://www.libteam.org/
Cc: Harald Hoyer <harald@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <amwang@redhat.com>
Commit a0be1ed removes some lines from do_static() and do_ipv6auto().
When $hostname is empty, do_static() and do_ipv6auto() will return 1
and fails to run setup_net at the last of ifup.sh
Signed-off-by: WANG Chao <chaowang@redhat.com>
It looks like ip=ibft has been busted since
25aa3c5 network: refactor stuff from netroot/parse-ip-opts to net-lib
which moved ibft parsing code out to the ibft_to_cmdline function.
The use of ifname_mac was partially replaced by a local mac, but not
completely, causing ibft_to_cmdline to abort without generating network
configuration options.
Signed-off-by: Chris Leech <cleech@redhat.com>
dhclient initqueue hook fix
setup_net is scheduled in initqueue, sometimes it does not get chance to run
So the default route will not be set properly
Add a check in initqueue/finished to resolve this issue.
Signed-off-by: Dave Young <dyoung@redhat.com>
We do not support renaming in the kernel namespace anymore (as udev does
that not anymore). So, if a user wants to use ifname, he has to rename
to a custom namespace. "eth[0-9]+" is not allowed anymore.
The patch, acfab373 - Handle upper case MAC addresses in ifname
option,takes care of only the MAC conversion to lower case in the
interface name. But the same has to be taken care for BOOTIF also.
This patch takes care of changing the BOOTIF to lower case.
Note that sed has been used in the patch instead of tr, as it is not
compulsion to install tr by dracut in the initramfs and may not be
available always.
Signed-off-by: Srinivasa T N (seenutn@linux.vnet.ibm.com)
>From 2ec9c91adbf808dbad9bdd2057d9df55a62b711f Mon Sep 17 00:00:00 2001
From: Srinivasa T N <seenutn@linux.vnet.ibm.com>
Date: Wed, 27 Jun 2012 11:20:13 +0530
Subject: [PATCH] Fixed BOOTIF for converting mac addr to lowercase
This patch adds support of vlan tagged bonding, for example,
bond0.2. In case of regression, I also tested bond0 and eth0.2,
all work fine.
Cc: Harald Hoyer <harald@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
"brd +" is not valid for ipv6. This causes the 'ip addr add' command to
fail with the message "Broadcast can be set only for IPv4 addresses".
So: don't use "brd +" for ipv6.
Harald Hoyer