In case of systemd is used the timeout already is set to 180s, compare
with file: modules.d/98systemd/dracut-initqueue.sh
Do the same if systemd is not used, e.g. in kdump case.
Signed-off-by: Thomas Renninger <trenn@suse.de>
When 'initqueue' is called with an invalid command it'll generate
invalid job scripts. This will lead to confusing error messages
later on.
So abort in these cases and print out a warning.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
If kernel cmdline has no root= provided, *and* the initrd carries
a default value, create a systemd mount unit to have it available
in /sysroot
References: bnc#855258
Signed-off-by: Thorsten Behrens <tbehrens@suse.com>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Add more corner cases from systemd's
unit_name_from_path_instance() C function.
Signed-off-by: Thorsten Behrens <tbehrens@suse.com>
Signed-off-by: Thomas Renninger <trenn@suse.de>
When generating units for devices the administrator might
want to use a different timeout than the default.
So implement a new parameter 'rd.timeout' for this.
References: bnc#878770
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Make sure duplicates of iscsi.initiator vanish.
Only get one rd.iscsi.* paramter value. If getargs is used and several
parameters are parsed, one gets two values separated by whitespace in a
variable which breaks later code and is not suppported.
Signed-off-by: Thomas Renninger <trenn@suse.de>
When installing on an software iscsi root we need to generate
the correct commandline, otherwise the system cannot boot.
References: bnc#880108
Patch: 0093
When using software iscsi we should be using the existing
configuration from the system for the time being.
References: bnc#884768
Patch: 0095
Avoid bad ip route call on empty address
Patch: 0143
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
This fixes up some 95iscsi/module-setup.sh which might print out empty
commandline files.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
bnx2i is using a separate iSCSI offload engine with a separate
MAC address. As a result, the iBFT information is displaying
a MAC address which does not relate to any MAC address from
the network interfaces.
In addition, the iSCSI offload engine works independently on
the NIC, so we do not need to enable the NIC for iSCSI offload
to work.
This patch modifies the automatic iBFT detection to not set
the 'ip=ibft' flag when bnx2i offload is detected.
References: bnc#855747
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
The bad initqueue parameter passing is already addressed by git commit:
commit bb8c16d121
and
commit 486a8f33e2
However this appraoch is slightly different:
"$netroot" instead of "'$netroot'", etc.
initqueue will process the arguments, assuming the first non-option
argument to be the program to be executed. Putting the entire
commandline into this argument confuses both, initqueue and the
program in question.
References: bnc#879038
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
When iSCSI firmware booting is selected we should not rely on
'netroot' or 'iscsiroot' variables to be set.
References: bnc#873448
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
iscsiuio is using pthread, which requires libgcc_s for
pthread_cancel to work.
Without this library iscsiuio will crash with SIGABRT.
References: bnc#881692
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Some iSCSI initiator present firmware information in
/sys/firmware/ibft or /sys/firmware/iscsi_bootX
Whenever we detect one of those directories we should assume
that the iSCSI devices should be activated.
Also incorporates SUSE patches:
0049:
95iscsi: Use 'ip=ibft' for ibft autoconfiguration
For iBFT autoconfiguration we should be setting 'ip=ibft'
instead of rd.neednet. This should instruct dracut to only
enable the iBFT interfaces and leave the rest alone.
References: bnc#879038
0054:
95iscsi: update commandline printing
dracut has a separate callout 'cmdline' which should be used
for printing out the generated commandline.
Signed-off-by: Pavel Wieczorkiewicz <pwieczorkiewicz@suse.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
The multipath and kpartx rules have different numbers in SUSE.
The 11-dm-mpath.rules file had been missing, causing
blacklisting to not work properly.
References: bnc#873151, bnc#872662, bnc#883149
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
sg3_utils now provides two rules 55-scsi-sg3_id.rules and
58-scsi-sg3_symlink.rules, which need to be included instead
of the older 59-scsi-sg3_utils.rules.
References: bnc#873151
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
This sed script to edit 64-md-raid-assemble.rules needs to
be adjusted for latest mdadm
References: bnc#866660
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
During boot systemd tries to load autofs4, but dracut will only
add it if it's loaded by the time dracut is run.
Modify dracut to always load autofs4.
References: bnc#869411
Signed-off-by: Thomas Renninger <trenn@suse.de>
This mimicks the similar move of os-release which was done in systemd. These
files are not configuration, but part of the OS.
Still symlinks are in place for compatibility, but those should probably be
dropped eventually.
In the judgment sentence, it will print the following warning message,
becasuse of lacking the blank on the left of ']'.
/lib/net-lib.sh: line 110: [: missing `]'
Signed-off-by: Minfei Huang <mhuang@redhat.com>
some programs e.g. systemd-journald expect a directory in /var/log as
the marker to do some actions. Here journald tries to flush
/run/log/journal to /var/log/journal, if the directory is seen.
/var/log is now a symlink to /run/initramfs/log.
If the user pressed ESC while checkisomd5 runs the media check, it will
exit with "2". Previously that would mean, that the media check was not
successful.
The multipathd package might install a service and a socket
file. Using the original service file from the installed
system without the socket file triggers a bug in systemd,
causing systemd to crash.
As we don't actually need to socket file in the initrd we
should be installing our own service file which does not
reference the socket file at all.
References: bnc#871610
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
The device handler modules need to be loaded early during boot
to avoid I/O errors being printed to the system log.
References: bnc#871617
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
multipathd is using pthreads, which require libgcc_s for
pthread_cancel to work. Without it multipathd might crash
with SIGABRT.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
udevd will these days default to 'info' logging and thus will
often print out the 'starting version nnn' message (which is
logged at level 'info'), thus spamming the console, even on
'quiet' boots.
We generally expect a udev log level of err (the old default
from pre-October 2013) so we should set that explicilty before
launching udevd in order to suppress the spurious 'info' message.
As we are using the environment variable approach anyway, we
may as well use this method rather than setting the log level
later via udevadm control commands when rd.udev.info/debug are
given on the kernel command line.
The enviroment variable has been around since udev 6b493a20e1
around 2005 so should be safe to use in all cases without version
checks.
It is not available to valid the customize dhcp config
/etc/dhclient.conf in the initram environment.
Dracut uses the default follow config to construct the initramfs.
request subnet-mask, broadcast-address, time-offset, routers,
domain-name, domain-name-servers, domain-search, host-name,
root-path, interface-mtu;
Copy the customize config to make the config availably in the
initram environment.
Signed-off-by: Minfei Huang <mhuang@redhat.com>
The usb_storage, nvme and sdhci_acpi modules are discovered with the
block_module_filter so there's no need to explicitly list them here.
Signed-off-by: <pbrobinson@gmail.com>
The synthetic keyboard of a Gen2 Linux VM doesn't work before the
hyperv_keyboard module is loaded. Without it, we can't cancel the media check
phase if boot with rd.live.check option.
Gen1 Linux VM doesn't have the same issue because the host emulates the legacy
i8042 keyboard for Gen1 VM.
Signed-off-by: Vaughan Cao <vaughan.cao@oracle.com>
Up until now, _check_shutdown() returns true if at least one of
the shutdown hooks succeeded. Change this to only return true if
*all* succeeded. To prevent an infinite loop, introduce an upper
bound of 40 iterations.
When you define the gateway for an interface, dracut sets it up with:
ip route add default via $gw dev $netif
If a default route is already set (e.g. if you have multiple NICs), this
will fail with the message "RTNETLINK answers: File exists".
So, if your first NIC isn't usable as a default route
Using "ip route replace default" instead allows ifup/dhclient-script to
correctly change the default route to the new interface.
Thomas Renninger