"ifup -m" was thought to be used by humans in the emergency shell.
Using it programatically shows some other flaw in the execution logic.
Also, "ifup -m" was configuring the interface multiple times on "add"
and "change" uevent, because the "$netif.did-setup" test was not
executed.
We only wait for master interfaces for bridge/bonding/team/vlan case.
If none of these complex network is configured, we should wait for
ethernet interface (bootdev) instead.
A MAC address is a unique identifier for a particular network interface.
We can use the MAC to generate udev rules to bring up that interface,
like we currently do with BOOTIF.
This patch allows interfaces to be specified as a MAC address, either
in the usual colon-separated form or the PXE-style dash-separated form.
(The latter is more useful on the commandline, since it allows for
arguments like: "ip=77-77-6f-6f-64-73:dhcp")
This is useful since it's common for a user who is booting a new OS for
the first time to know the MAC of the device, but not know what the
kernel name will be.
Currently dracut only support 1 bond, namyly bond0 by default. However multiple
bonds configuration may be needed. For example in kdump, in 1st kernel, more
than one bonds may be configured, and bondX other than bond0 is used as output
interface to remote host which will store dump core. This patch can solve this
problem, to write real bond information to initramfs, 2nd kdump kernel will
use it to create the relevant bondX interface.
Tested-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Baoquan He <bhe@redhat.com>
In case long delay of network driver initqueue will exit before net dev is
ready. We have no chance to setup it then.
For dhcp, when we finish the setup there will be a setup_net_<dev>.ok. Doing
same for static ip case. Also add a check to initqueue when we generate udev
rules to ensure it's early enough.
[v1->v2]: only wait for bootdev or it's possible to cause boot fail for
waiting for non-bootdev. For example bond0->eth0, set bond0 as bootdev and
dhcp, we only need to wait bond0 setup ok.
Signed-off-by: Dave Young <dyoung@redhat.com>
In case BOOTIF is not set and IFACES are not set in bonding/vlan/bridge code,
net-genrule.sh will fall to bring up all net interfaces.
Here add a failsafe option to read IFACES from /tmp/net.ifaces
[v1->v2]: move IFACES reading from net.ifaces after bonding/vlan/bridge info
code chunks.
[v2->v3]: [ -n "$IFACES" ] should be [ -z "$IFACES" ]
Signed-off-by: Dave Young <dyoung@redhat.com>
V2: merge patch 2/2
fix active-backup mode by adding slaves one by one
sync with the latest teamd
improve the comments
wait for team ports to come up
install /etc/libnl/classid too
This patch adds the initial support for team device [1].
A new cmdline team= is introduced for it.
Note, currently we don't support stacked devices
on/under team, it is tricky and can be added on request.
1. http://www.libteam.org/
Cc: Harald Hoyer <harald@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <amwang@redhat.com>
We do not support renaming in the kernel namespace anymore (as udev does
that not anymore). So, if a user wants to use ifname, he has to rename
to a custom namespace. "eth[0-9]+" is not allowed anymore.
The patch, acfab373 - Handle upper case MAC addresses in ifname
option,takes care of only the MAC conversion to lower case in the
interface name. But the same has to be taken care for BOOTIF also.
This patch takes care of changing the BOOTIF to lower case.
Note that sed has been used in the patch instead of tr, as it is not
compulsion to install tr by dracut in the initramfs and may not be
available always.
Signed-off-by: Srinivasa T N (seenutn@linux.vnet.ibm.com)
>From 2ec9c91adbf808dbad9bdd2057d9df55a62b711f Mon Sep 17 00:00:00 2001
From: Srinivasa T N <seenutn@linux.vnet.ibm.com>
Date: Wed, 27 Jun 2012 11:20:13 +0530
Subject: [PATCH] Fixed BOOTIF for converting mac addr to lowercase
This patch adds support of vlan tagged bonding, for example,
bond0.2. In case of regression, I also tested bond0 and eth0.2,
all work fine.
Cc: Harald Hoyer <harald@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
A bridge device with only one underlying ethernet device is almost
useless, for sure we want to support a bridge with multiple
underlying devices.
This patch adds the support by extending <ethname> in the original
bridge= cmdline to a comma-separated list of ethernet interfaces.
Cc: Harald Hoyer <harald@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
rd.neednet could be removed, as we can check /tmp/net.ifaces.
After this patch, kdump can bring up the NIC without
rd.neednet.
Cc: Harald Hoyer <harald@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
This patch adds basic vlan support in network module.
The cmdline syntax for vlan is:
vlan=<vlanname>:<phydevice>
for an example:
vlan=eth0.2:eth0
or
vlan=vlan2:eth0
See also patch 2/8.
Cc: Harald Hoyer <harald@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
This makes sure the network is active and ready to use during the
initqueue/online hook.
It also makes it so you can run setup_net repeatedly without causing
error messages.
The "online" hook runs whenever a network interface comes online (that
is, once it's actually up and configured).
The initqueue --env argument is used to set "$netif" to the name of the
newly-online network interface.
Current dracut network only will be setup when netroot is used. But there are
some cases we need network even without netroot. For example kdump will need
copy vmcore to remote machine via scp or nfs mount. OTOH, if we use dracut as
a recovery system the network is helpful even root is not a network device.
This implementation is based on the manually bring up method. Here add a kernel
cmdline argument rd.neednet. If rd.neednet is set dracut will bring up network
with ifup $INTERFACE -m. If netroot is used we still keep original behavior.
Signed-off-by: Dave Young <dyoung@redhat.com>
Format:
bond=<bondname>[:<bondslaves>:[:<options>]]
bondslaves is a comma-separated list of physical (ethernet) interfaces.
options is a comma-separated list on bonding options (modinfo bonding for
details) in format compatible with initscripts.
If options include multi-valued arp_ip_target option, then its values
should be separated by semicolon.
bond without parameters assumes bond=bond0:eth0,eth1:balance-rr
ifname=<interface>:<MAC>
Assign network device name <interface> (ie eth0) to the NIC with MAC <MAC>.
Note that if you use this option you *must* specify an ifname= argument
for all interfaces used in ip= or fcoe= arguments
* SYNTAX
bridge=<bridgename>:<ethname>
If bridge without parameters, assume bridge=br0:eth0
* When <ethname> would be configured by network scripts, instead create a bridge named <bridgename> then add <ethname> to that bridge.
* Then $netif becomes <bridgename> instead of <ethname> and all existing scripts process netroot mount via this new $netif instead of <ethname>.
* Include a few test cases in NFS and NBD
Udev rules set a /dev/root symlink to the real root and add
a mount script to /mount/. This enables the proper use of pre-mount
scripts and prevents mount being killed by a udev timeout.
Jobs are no longer handled inside the udev events.
/sbin/initqueue is called with the commands to queue.
init will work on these jobs sequentially, so that we prevent jobs
from being killed by udev timeouts.
This serialization also prevents some problems introduced by
the udev event parallelization.
This introduces a new cmdline argument bootdev, to support the case
where multiple nics need to be up before the netroot handler is called.
Cases involved might be bonding, iscsi multipathing, bonding, ...
This argument is required to decide which interface is the primary to
use for dhcp root-path, default gw, etc.
When multiple ip= items are present on the cmdline, the ip= parser
now enforces the presence of <dev> further demands that the new argument
bootdev contains the name of the primary interface. Configurtion if of
course still delegated to netroot but in is enhance to ensure that netroot
"waits" for all required interfaces to be up.
Example: root=dhcp ip=eth0:dhcp ip=client-ip:::netmask::eth1:off bootdev=eth0
First, the ip= cmdline parser ensures that all ip items contain a <dev> then
checks the ip items and checks as well that an ip= item for the given bootdev
was found.
When the first netroot starts, probably for eth1, it checks wheter interface
configuration for all interfaces is available. If not it exits. The second
start of netroot (eth0, which was a bit delayed because of dhcp) sees that
all interfaces are present, configures them and continues.
Currently network configuration is launched by udev as soon as it
discovers a driver. This isn't such a good idea since we don't know
if network configuration is actually required. Change this by writing
the udev rules on the fly if required.
Harald Hoyer