The iSCSI configuration is started after dracut checks for resume,
so we run into a timeout here. Additionally it's questionable if
resume on iSCSI makes sense (or is even supported on the platform).
Same holds true for Network Block Devices and FcOE, cover those as well
References: bsc#999663
Original-patch-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Daniel Molkentin <daniel.molkentin@suse.com>
ipv6 addresses need square brackets, otherwise the iscsi discovery and log-in,
which adds the iscsi port after another colon will get confused and fail.
Previous all files are installed with inst_dir, which will not install
the files under /etc/iscsi/, and it create folders with the same of the
files which is wrong.
Now only use inst_dir to install the config dir and ensure it
exists, and use inst_multiple to install the config files.
Signed-off-by: Kairui Song <kasong@redhat.com>
For the shell scripts, new environment variables were introduced.
dracutsysrootdir is the root directory, file existence checks use it.
DRACUT_LDCONFIG can override ldconfig with a different one that works
on the sysroot with foreign binaries.
DRACUT_LDD can override ldd with a different one that works
with foreign binaries.
DRACUT_TESTBIN can override /bin/sh. A cross-compiled sysroot
may use symlinks that are valid only when running on the target
so a real file must be provided that exist in the sysroot.
DRACUT_INSTALL now supports debugging dracut-install in itself
when run by dracut but without debugging the dracut scripts.
E.g. DRACUT_INSTALL="valgrind dracut-install or
DRACUT_INSTALL="dracut-install --debug".
DRACUT_COMPRESS_BZIP2, DRACUT_COMPRESS_LBZIP2, DRACUT_COMPRESS_LZMA,
DRACUT_COMPRESS_XZ, DRACUT_COMPRESS_GZIP, DRACUT_COMPRESS_PIGZ,
DRACUT_COMPRESS_LZOP, DRACUT_COMPRESS_ZSTD, DRACUT_COMPRESS_LZ4,
DRACUT_COMPRESS_CAT: All of the compression utilities may be
overridden, to support the native binaries in non-standard places.
DRACUT_ARCH overrides "uname -m".
SYSTEMD_VERSION overrides "systemd --version".
The dracut-install utility was overhauled to support sysroot via
a new option -r and fixes for clang-analyze. It supports
cross-compiler-ldd from
https://gist.github.com/jerome-pouiller/c403786c1394f53f44a3b61214489e6f
DRACUT_INSTALL_PATH was introduced so dracut-install can work with
a different PATH. In a cross-compiled environment (e.g. Yocto), PATH
points to natively built binaries that are not in the host's /bin,
/usr/bin, etc. dracut-install still needs plain /bin and /usr/bin
that are relative to the cross-compiled sysroot.
The hashmap pool allocate_tile/deallocate_tile code was removed
because clang-analyze showed errors in it. hashmap_copy was removed
because it wasn't used and clang-analyze showed errors in it.
DRACUT_INSTALL_LOG_TARGET and DRACUT_INSTALL_LOG_LEVEL were
introduced so dracut-install can use different settings from
DRACUT_LOG_TARGET and DRACUT_LOG_LEVEL.
Signed-off-by: Böszörményi Zoltán <zboszor@pr.hu>
The new qedi driver needs to be handled just like
the bnx2i driver, so update 95iscsi scripts to do this.
References: bsc#1113712
Signed-off-by: Lee Duncan <lduncan@suse.com>
Fixes these error messages during intird build:
cat: '/sys/devices/platform/host2/flashnode_sess-*/is_boot_target': No such file or directory
/usr/lib/dracut/modules.d/95iscsi/module-setup.sh: line 91: [: -eq: unary operator expected
cat: '/sys/devices/platform/host3/flashnode_sess-*/is_boot_target': No such file or directory
/usr/lib/dracut/modules.d/95iscsi/module-setup.sh: line 91: [: -eq: unary operator expected
On SLE15-SP1 at least, iscsiadm doesn't support combining --op and --login":
> # iscsiadm -m node -T iqn.2018-06.de.suse.zeus:01 --op=update --name=node.startup --value=onboot --login
> iscsiadm: Invalid parameters. Login/logout and op passed in
This breaks iSCSI login in initrd, and thus, iSCSI boot.
Fix it by not coalescing everything into a single iscsiadm command.
Fixes: a59b776bc215 ("Dracut: only login to one target at a time")
References: bsc#1152650
According to the dracut README, module code to be run in
the initrd must be POSIX-compliant. Replace remaining
bashisms (as reported by checkbashisms) with POSIX compliant
code.
The use of "type" is not strictly POSIX compliant, but it's
all over the place in dracut code. dash supports it, anyway.
In multipath scenarios, "iscsiadm -m node" may contain
several records with the same target.
There's no point in trying "iscsiadm --login" multiple
time for the same target, through the same portal.
Moreover, warn if the desired target is not on the node
list.
dracut waits for every iscsiroot connection to be established
before switching root. This is not necessary in multipath scenarios,
where a single path is usually sufficient to set up the root device,
and where users expect booting to succeed unless all paths are down.
Don't wait for the iscsi portal to start if the root device has
already been found.
For handling the configuration where there are two
paths to an iscsi root target, each using a different
NIC. In such a case, the initramfs was trying to configure
the first NIC, then call iscsiroot to login to both targets,
which would fail for the 2nd target, since the path to the
2nd target was not yet configured. This would eventually
work after a timeout. But it's better to login to just
one target at a time.
This change makes the initramfs handle multiple paths to an
iscsi target better by logging into only one target at a time,
rather than trying to login to all targets when only one of
several NICs is up.
This can be further optimized by using the initrd parameter
"rd.iscsi.testroute", which would skip iscsiadm login attempts
for targets to which no route exists.
If the script is called again via the timeout initqueue,
we try "iscsiadm -L onboot" again, hoping that some targets
may now have become reachable.
- The network script and config could be in
"/etc/sysconfig/network-scripts", so try look for network config in
all possible path.
- The regex used for sed is not working, so fix it too.
- Make bootproto a local variable
Signed-off-by: Kairui Song <kasong@redhat.com>
cat: '/sys/devices/platform/host2/flashnode_sess-*/is_boot_target': No such file or directory
/usr/lib/dracut/modules.d/95iscsi/module-setup.sh: line 90: [: -eq: unary operator expected
These dependencies cause an odd issue where swap devices specified
by resume= on the kernel command line will cause systemd device
timeouts to occur on boot. According to @haraldh these lines aren't
needed because the socket activiation will take care of it for us.
Removing these lines now as it fixes the resume= device timeout issue.
Fixes#480
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=1641268
ln: failed to create symbolic link '/usr/lib/systemd/system/sockets.target.wants/iscsid.socket': Permission denied
ln: failed to create symbolic link '/usr/lib/systemd/system/sockets.target.wants/iscsiuio.socket': Permission denied
No way. Just ensure the links are there in the initramfs image. In fact,
that is already the case for iscsiuio.socket. Add iscsid.socket too.
According to Cathy Zhou <Cathy.Zhou@Oracle.COM>:
"iscsistart is not designed to be working together with iscsid. When an
interface gets the dhcp offer successfully, the iscsiroot script is run
which starts the iscsistart service to establish the iSCSI session. With
the existence of iscsid, the iscsistart service's attempt to setup its
own mgmt ipc fails. Instead, the request to login to the iscsi target
is handled by the mgmt ipc of iscsid. After iscsistart finishes its
login attempt, it eventually sends a stop_event_loop request to stop
the mgmt process. As the result, it terminates iscsid."
So, iscsid is kicked out again.
Additionally iscsistart-flocked is used to make sure iscsistart is not
run in parallel.
If no iscsi session information can be retrieved from the firmware
then skip the iscsi attachment and allow the boot process to continue.
Ensure the timeout scripts don't hit their timeout waiting for
/tmp/iscsistarted-firmware to be created.
This will allow a common image to be used for servers with both a
local and iscsi root with rd.iscsi.firmware set.
Daniel Molkentin