Basic systemd functionality is in 00systemd now.
Switching root and the initrd.target is in 00systemd-initrd.
Dracut additions to the systemd initrd are in 98dracut-systemd.
Previously rd.live.fsimg only supported filesystems residing in
(compressed) archives.
Now rd.live.fsimg can also be used when a squashfs image is used.
This is achieved by extracting the rootfs image from the squashfs and
then continue with the default routines for rd.live.fsimg.
In addition some code duplication got removed and some documentation
got added.
Signed-off-by: Fabian Deutsch <fabiand@fedoraproject.org>
This option changes the underlying mechanism for the overlay in the
dmsquash module.
Instead of a plain dm snapshot a dm thin snapshot is used. The advantage
of the thin snapshot is, that the TRIM command is recognized, which
means that at runtime, only the occupied blocks will be claimed from
memory, and freed blocks will really be freed in ram.
Signed-off-by: Fabian Deutsch <fabiand@fedoraproject.org>
Dracut will generate systemd units for additional devices that should be
brought up during boot, e.g. swap devices. These unit files are broken
symlinks with \ in the filename, e.g.
/etc/systemd/system/initrd.target.wants/dev-disk-by\x2duuid-e6a54f99\x2da4fd\x2d4931\x2da956\x2d1c642bcfee5e.device.
Both the backslash and the broken symlink causes problems for shell
scripts, [ -e "$file" ] isn't enough and read requires the additional -r
argument to not react on the \.
The function 99shutdown/shutdown.sh:_check_shutdown() assumes that
shutdown scripts report success or failure via their return value.
However, "dmsetup remove_all" always reports success, even if some
of the device mappings could not be removed.
I submitted a patch for dmsetup but the lvm2 folks rejected it,
asserting that its behaviour is correct, that "remove_all" should
only be used by developers and that the proper solution would be
to invoke "dmsetup remove" on each device. This does report success
or failure via the return value.
Apart from fixing that issue, this commit also adds the dmsetup
option "--noudevsync". Without it, dmsetup would hang after removal
of a device while trying to communicate with systemd-udevd, which
is no longer running at this shutdown stage.
[harald: replaces backticks with $() ]
The sdhci-pci module is currently not being included in the initramfs,
even though other sdhci modules are. This breaks boot on systems that
rely on this driver to access the root filesystem.
Instead of looking for modules that use sdhci_pltfm_init, look for
sdhci_add_host. I checked 3.18 kernel sources, and this change
does not remove any of the previously-matched SDHCI drivers.
It should result in the addition of sdhci-pci, sdhci-s3c, sdhci-spear
and sdhci-acpi.
For targets with colons in the iSCSI target name:
"iqn.2000-09.com.foo:storage-system.e2000:00000001cm1p1"
the parser was confused with the optional iscsi_iface_name and
iscsi_netdev_name.
This patch reintroduces the old IQN, EUI and NAA parsing and enhances
the fallback parser by checking the LUN for a numerical value.
As reported in https://bugs.mageia.org/show_bug.cgi?id=14799
the xhci module got splitted up in upstream linux merged during
3.18 release cycle:
>From 29e409f0f7613f9fd2235e41f0fa33e48e94544e Mon Sep 17 00:00:00 2001
From: Andrew Bresticker <abrestic@chromium.org>
Date: Fri, 3 Oct 2014 11:35:29 +0300
Subject: xhci: Allow xHCI drivers to be built as separate modules
so we need to adjust 90kernel-modules accordingly.
Signed-off-by: Thomas Backlund <tmb@mageia.org>
rootfs is on nbd
In not hostonly mode, require_binaries will still complain.
If in hostonly mode and the module is explicitly added via -a nbd, then
install() section will still complain later:
dracut-install: ERROR: installing 'nbd-client'
Signed-off-by: Thomas Renninger <trenn@suse.de>
95rootfs-block would not terminate the commandline parameter with
a space or newline, instead it'll rely on the main routine from
dracut.sh to do this.
Which will cause unexpected problems for any modules called
after this.
So terminate the commandline parameters correctly here and remove
the newline from dracut.sh.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
This aligns other places piping cmdline() output to cmdline.d files
with the earlier fix for 95rootfs-block.
Signed-off-by: Thorsten Behrens <tbehrens@suse.com>
Signed-off-by: Thomas Renninger <trenn@suse.de>
If there's a root fallback, at least attempt to have it falling
back to the last root filesystem this system ran off of.
Signed-off-by: Thorsten Behrens <tbehrens@suse.com>
Signed-off-by: Thomas Renninger <trenn@suse.de>
cmdline_journal does not contain linefeeds anymore, so read
silently skipped it altogether.
Signed-off-by: Thorsten Behrens <tbehrens@suse.com>
Signed-off-by: Thomas Renninger <trenn@suse.de>
nvidia driver needs this via modprobe script.
Needs to do change the group after a device node got created.
Add chown instead of chgrp which can also change the owner of a file.
Ask Stefand Dirsch <sndirsch@suse.de> for details.
Signed-off-by: Thomas Renninger <trenn@suse.de>
The module_setup.sh script was missing an '_arch' declaration,
causing network not to be installed on s390.
Signed-off-by: Thomas Renninger <trenn@suse.de>
SUSE is using specific settings for dracut, so add them
to the suse.conf.example file.
Add vi and find to the debug module add some help text to the suse.conf
file when and how to use it.
Signed-off-by: Thomas Renninger <trenn@suse.de>
lldpad is a system-wide process, which must be started only once.
So we should be separate it from fcoe-up, as it might be called
several times.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
DCB & fipvlan can only be called on real devices, not VLAN
ones. So skip any VLAN devices which might been added to the
list of network interfaces.
References: bnc#878583
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
When running with --hostonly-cmdline we should be storing
the current configuration in /etc/cmdline.d so that dracut
will be configure the system automatically.
References: bnc#877288
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
The 'create' sysfs entry has been removed for newer fcoe modules,
so just check if the module directory exists.
References: bnc#877288
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Due to some obsure reason the IFS parameter is not set correctly
when evaluating get_ibft_mod(). So change the parsing to not rely
on IFS altogether.
References: bnc#886199
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
cmdline
If the rootfs is an nfs mount, also know as nfsroot, add the correct
parameter to the dracut cmdline.
Signed-off-by: Thomas Renninger <trenn@suse.de>
In case of systemd is used the timeout already is set to 180s, compare
with file: modules.d/98systemd/dracut-initqueue.sh
Do the same if systemd is not used, e.g. in kdump case.
Signed-off-by: Thomas Renninger <trenn@suse.de>
When 'initqueue' is called with an invalid command it'll generate
invalid job scripts. This will lead to confusing error messages
later on.
So abort in these cases and print out a warning.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
If kernel cmdline has no root= provided, *and* the initrd carries
a default value, create a systemd mount unit to have it available
in /sysroot
References: bnc#855258
Signed-off-by: Thorsten Behrens <tbehrens@suse.com>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Add more corner cases from systemd's
unit_name_from_path_instance() C function.
Signed-off-by: Thorsten Behrens <tbehrens@suse.com>
Signed-off-by: Thomas Renninger <trenn@suse.de>
When generating units for devices the administrator might
want to use a different timeout than the default.
So implement a new parameter 'rd.timeout' for this.
References: bnc#878770
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Make sure duplicates of iscsi.initiator vanish.
Only get one rd.iscsi.* paramter value. If getargs is used and several
parameters are parsed, one gets two values separated by whitespace in a
variable which breaks later code and is not suppported.
Signed-off-by: Thomas Renninger <trenn@suse.de>
When installing on an software iscsi root we need to generate
the correct commandline, otherwise the system cannot boot.
References: bnc#880108
Patch: 0093
When using software iscsi we should be using the existing
configuration from the system for the time being.
References: bnc#884768
Patch: 0095
Avoid bad ip route call on empty address
Patch: 0143
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
This fixes up some 95iscsi/module-setup.sh which might print out empty
commandline files.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
bnx2i is using a separate iSCSI offload engine with a separate
MAC address. As a result, the iBFT information is displaying
a MAC address which does not relate to any MAC address from
the network interfaces.
In addition, the iSCSI offload engine works independently on
the NIC, so we do not need to enable the NIC for iSCSI offload
to work.
This patch modifies the automatic iBFT detection to not set
the 'ip=ibft' flag when bnx2i offload is detected.
References: bnc#855747
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
The bad initqueue parameter passing is already addressed by git commit:
commit bb8c16d121
and
commit 486a8f33e2
However this appraoch is slightly different:
"$netroot" instead of "'$netroot'", etc.
initqueue will process the arguments, assuming the first non-option
argument to be the program to be executed. Putting the entire
commandline into this argument confuses both, initqueue and the
program in question.
References: bnc#879038
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
When iSCSI firmware booting is selected we should not rely on
'netroot' or 'iscsiroot' variables to be set.
References: bnc#873448
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
iscsiuio is using pthread, which requires libgcc_s for
pthread_cancel to work.
Without this library iscsiuio will crash with SIGABRT.
References: bnc#881692
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Some iSCSI initiator present firmware information in
/sys/firmware/ibft or /sys/firmware/iscsi_bootX
Whenever we detect one of those directories we should assume
that the iSCSI devices should be activated.
Also incorporates SUSE patches:
0049:
95iscsi: Use 'ip=ibft' for ibft autoconfiguration
For iBFT autoconfiguration we should be setting 'ip=ibft'
instead of rd.neednet. This should instruct dracut to only
enable the iBFT interfaces and leave the rest alone.
References: bnc#879038
0054:
95iscsi: update commandline printing
dracut has a separate callout 'cmdline' which should be used
for printing out the generated commandline.
Signed-off-by: Pavel Wieczorkiewicz <pwieczorkiewicz@suse.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
The multipath and kpartx rules have different numbers in SUSE.
The 11-dm-mpath.rules file had been missing, causing
blacklisting to not work properly.
References: bnc#873151, bnc#872662, bnc#883149
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
sg3_utils now provides two rules 55-scsi-sg3_id.rules and
58-scsi-sg3_symlink.rules, which need to be included instead
of the older 59-scsi-sg3_utils.rules.
References: bnc#873151
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
This sed script to edit 64-md-raid-assemble.rules needs to
be adjusted for latest mdadm
References: bnc#866660
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
During boot systemd tries to load autofs4, but dracut will only
add it if it's loaded by the time dracut is run.
Modify dracut to always load autofs4.
References: bnc#869411
Signed-off-by: Thomas Renninger <trenn@suse.de>
This mimicks the similar move of os-release which was done in systemd. These
files are not configuration, but part of the OS.
Still symlinks are in place for compatibility, but those should probably be
dropped eventually.
In the judgment sentence, it will print the following warning message,
becasuse of lacking the blank on the left of ']'.
/lib/net-lib.sh: line 110: [: missing `]'
Signed-off-by: Minfei Huang <mhuang@redhat.com>
some programs e.g. systemd-journald expect a directory in /var/log as
the marker to do some actions. Here journald tries to flush
/run/log/journal to /var/log/journal, if the directory is seen.
/var/log is now a symlink to /run/initramfs/log.
If the user pressed ESC while checkisomd5 runs the media check, it will
exit with "2". Previously that would mean, that the media check was not
successful.
The multipathd package might install a service and a socket
file. Using the original service file from the installed
system without the socket file triggers a bug in systemd,
causing systemd to crash.
As we don't actually need to socket file in the initrd we
should be installing our own service file which does not
reference the socket file at all.
References: bnc#871610
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
The device handler modules need to be loaded early during boot
to avoid I/O errors being printed to the system log.
References: bnc#871617
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
multipathd is using pthreads, which require libgcc_s for
pthread_cancel to work. Without it multipathd might crash
with SIGABRT.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
udevd will these days default to 'info' logging and thus will
often print out the 'starting version nnn' message (which is
logged at level 'info'), thus spamming the console, even on
'quiet' boots.
We generally expect a udev log level of err (the old default
from pre-October 2013) so we should set that explicilty before
launching udevd in order to suppress the spurious 'info' message.
As we are using the environment variable approach anyway, we
may as well use this method rather than setting the log level
later via udevadm control commands when rd.udev.info/debug are
given on the kernel command line.
The enviroment variable has been around since udev 6b493a20e1
around 2005 so should be safe to use in all cases without version
checks.
It is not available to valid the customize dhcp config
/etc/dhclient.conf in the initram environment.
Dracut uses the default follow config to construct the initramfs.
request subnet-mask, broadcast-address, time-offset, routers,
domain-name, domain-name-servers, domain-search, host-name,
root-path, interface-mtu;
Copy the customize config to make the config availably in the
initram environment.
Signed-off-by: Minfei Huang <mhuang@redhat.com>
The usb_storage, nvme and sdhci_acpi modules are discovered with the
block_module_filter so there's no need to explicitly list them here.
Signed-off-by: <pbrobinson@gmail.com>
The synthetic keyboard of a Gen2 Linux VM doesn't work before the
hyperv_keyboard module is loaded. Without it, we can't cancel the media check
phase if boot with rd.live.check option.
Gen1 Linux VM doesn't have the same issue because the host emulates the legacy
i8042 keyboard for Gen1 VM.
Signed-off-by: Vaughan Cao <vaughan.cao@oracle.com>
Up until now, _check_shutdown() returns true if at least one of
the shutdown hooks succeeded. Change this to only return true if
*all* succeeded. To prevent an infinite loop, introduce an upper
bound of 40 iterations.
When you define the gateway for an interface, dracut sets it up with:
ip route add default via $gw dev $netif
If a default route is already set (e.g. if you have multiple NICs), this
will fail with the message "RTNETLINK answers: File exists".
So, if your first NIC isn't usable as a default route
Using "ip route replace default" instead allows ifup/dhclient-script to
correctly change the default route to the new interface.
This patch adds bittorrent support to 45url-lib for those that might want
to retrieve the same live image for multiple systems at once without
saturating the network.
This patch requires ctorrent to be installed into initramfs.
Torrent kernel command line format:
root=live:torrent://example.com/liveboot.img.torrent
Start a tracker:
bttrack --bind <tracker_ip> --port 6969 --dfile dstate --reannounce_interval 60
Create the torrent:
ctorrent -t live_image -u http://<tracker_ip>:6969/announce -s live_image.torrent
Seed the initial torrent:
ctorrent live_image.torrent
Boot the live image.
A user can provide a filesystem image (rootfs.img) inside a compressed
tarball and that filesystem image will be mounted read/write. This provides
some benefits over a device mapper snapshot overlay, especially when the
live system becomes full. The boot command line simple needs
"rd.writable.fsimg" added to utilize this feature.
Additional documentation for this option as well as other live boot
options is included.
Signed-off-by: Major Hayden <major@mhtx.net>
When installing OS to a VLAN enabled iscsi LUN (extracted from iBFT), "/tmp/net.{xyz}.has_ibft_config" is not being set properly.
Then anaconda installer requires 'BOOTPROTO="ibft"' populated in ifcfg of the vlan interface (ex: ibft0.20), for it to properly populate the kernel parameters post installation. The setting 'BOOTPROTO="ibft"' is populated by write-ifcfg.sh script only if the corresponding interface has a file /tmp/net.{xyz}.has_inft_config
To get around this issue, in ibft_to_cmdline() function in net-lib.sh file, I made the following changes to populate the has_ibft_config file for the vlan interface(ex: ibft0.20):
rd.iscsi.ibft[=1] should be used instead.
Thing is, 'ip=ibft' is not really an ip setting, but rather a marker
that iBFT should be evaluated.
Also removed the trigger of the warning:
"Warning: Please supply bootdev argument for multiple ip= lines"
When a bonded interface is brought up, any slaves included in the bond
have their hardware address set to that of the bond master. Although
this allows an interface to be brought up on start up, when the
configuration file is imported into the booted system it prevents
the bonded interface being successfully restarted.
The fix involves obtaining the hardware address of the slaves before
they are added to the bond and then using this value in the
configuration file.
Currently the block driver detection for generic initrd doesn't include
the SD/MMC drivers so we fail to boot generic images on any device using
those platforms as boot devices when using a generic initrd. Add logic
to detect those modules. This primarily fixes embedded ARM devices but
also likely intel tablets/dev boards and enterprise hypervisors that
have the ability to boot from SD.
Also the ahci_init_controller misses a number of drivers that use the
libahci_platform module for the init so this fixes some missing achi
moduless too.
Finally it cleans up the ARM storage module hacks that the above now
deals with in a more generic manner.
Signed-off-by: <pbrobinson@gmail.com>
It turns out that commit f30b74e (dracut-initqueue service runs before
remote-fs-pre.target) is partial fix for remote fs mounts. Because no
one pulls in remote-fs.target, we can never start remote fs mounts.
Now pull in remote-fs.target in dracut-pre-pivot.
Signed-off-by: WANG Chao <chaowang@redhat.com>
cmdline() prints empty "resume=" options for non-persistent swap
devices, for example zram. Add a check for that.
This patch also fixes printf formatting and removes unused variables.
Without the 59-scsi-sg3_utils.rules udev-rule a couple of devices are missing
in /dev/disk/by-id.
If the luks device is specified by-id in /etc/crypttab and rd.luks.uuid not
passed as a commandline parameter during boot, systemd tries to start its
crypto services which depend on those missing devices until it times out and
exits to dracut rescue shell.
Signed-off-by: Julian Wolf <juwolf@suse.com>
The rootfs-generator was installed in the wrong path
in the initrd, cause it never to be run.
References: bnc#878714
Signed-off-by: Hannes Reinecke <hare@suse.de>
By convention, strstr should be a literal string match. Previously, it
would match as a glob pattern. Some code used that, so add new
functions strglob and strglobin to do what that code expects, and
specify them tightly too. strglob tests whether the glob pattern
matches the entire string (the name strglob is also used in the yorick
language, and that's what it does there), while strglobin tests whether
the glob pattern matches anywhere in the string.
Also tightens str_starts, str_ends, and str_replace to deal with
literal strings only. In a quick grep I did not find code that depended
on these functions matching globs.
Changes the call sites where strstr was used with glob patterns to use
strglobin or strglob as the intention seemed to be (or, in one case,
strstr with the * removed as it did not affect the result anyway).
With the following commit, dracut doesn't mount anything from /etc/fstab
commit e920bfb
Author: WANG Chao <chaowang@redhat.com>
Date: Tue Apr 1 15:20:49 2014 +0800
fstab: do not mount and fsck from fstab if using systemd
But systemd doesn't mount nfs at all, because no unit is pulling in
remote-fs.target.
dracut must pull in these remote fs mount and all these remote mounts
should start only after network is up (ie. after dracut-initqueue).
Signed-off-by: WANG Chao <chaowang@redhat.com>
Before modifying 69-dm-lvm-metad.rules, we should check for the
existance first. Otherwise this results in error messages on
distributions (debian), which do not ship these rules.
Harald Hoyer