test/{10,12,13,14,17,30,31}: increase the disk sizes

On Fedora 30 the paritition sizes turn out to be too small again:

  + mkdir -p /sysroot
  + mount /dev/dracut/root /sysroot
  + cp -a -t /sysroot /source/bin /source/dev /source/etc /source/lib /source/lib64 /source/proc /source/root /source/sbin /source/sys /source/tmp /source/usr /source/var
  cp: error writing '/sysroot/usr/lib64/libkrb5.so.3.3': No space left on device
  cp: error writing '/sysroot/usr/lib64/libkrb5support.so.0.1': No space left on device

It turns out that there has been quite some size increase in some libraries,
notably glibc, though not all -- some even shrunk, ruling out a toolchain
problem. Here's are files over 1M we install on Fedora 30:

   f29    f30
  2.7M => 6.4M /usr/lib64/{libc-2.28.so => libc-2.29.so}
  3.1M => 6.0M /usr/lib64/libcrypto.so.1.1.1c
  2.0M => 3.5M /usr/lib64/{libm-2.28.so => libm-2.29.so}
  2.9M => 2.8M /usr/lib/systemd/{libsystemd-shared-239.so => libsystemd-shared-241.so}
  1.7M => 2.5M /usr/lib64/libunistring.so.2.1.0
  2.3M => 2.4M /usr/lib64/bind9-export/libdns-export.so.1105.0.0
  1.2M => 2.1M /usr/bin/bash
  1.1M => 1.4M /usr/lib64/libkrb5.so.3.3
  1.2M => 1.4M /usr/lib64/libgcrypt.so.20.2.4
  612K => 1.1M /usr/lib64/libssl.so.1.1.1c

This increases the image sizes to accomodate for this. There's probably
little else we can do.

test/TEST-10-RAID/create-root.sh

@@ -8,9 +8,9 @@ udevadm control --reload
 # save a partition at the beginning for future flagging purposes
 sfdisk /dev/sda <<EOF
 ,4M
-,25M
+,41M
-,25M
+,41M
-,25M
+,41M
 EOF
 udevadm settle
 mdadm --create /dev/md0 --run --auto=yes --level=5 --raid-devices=3 /dev/sda2 /dev/sda3 /dev/sda4

test/TEST-10-RAID/test.sh

@@ -22,7 +22,7 @@ test_setup() {
     DISKIMAGE=$TESTDIR/TEST-10-RAID-root.img
     # Create the blank file to use as a root filesystem
     rm -f -- $DISKIMAGE
-    dd if=/dev/null of=$DISKIMAGE bs=1M seek=80
+    dd if=/dev/null of=$DISKIMAGE bs=1M seek=128
 
     kernel=$KVERSION
     # Create what will eventually be our root filesystem onto an overlay

test/TEST-12-RAID-DEG/test.sh

@@ -59,9 +59,9 @@ test_setup() {
     # Create the blank file to use as a root filesystem
     rm -f -- $TESTDIR/root.ext2
     dd if=/dev/null of=$TESTDIR/root.ext2 bs=1M seek=40
-    dd if=/dev/null of=$TESTDIR/disk1.img bs=1M seek=20
+    dd if=/dev/null of=$TESTDIR/disk1.img bs=1M seek=35
-    dd if=/dev/null of=$TESTDIR/disk2.img bs=1M seek=20
+    dd if=/dev/null of=$TESTDIR/disk2.img bs=1M seek=35
-    dd if=/dev/null of=$TESTDIR/disk3.img bs=1M seek=20
+    dd if=/dev/null of=$TESTDIR/disk3.img bs=1M seek=35
 
     kernel=$KVERSION
     # Create what will eventually be our root filesystem onto an overlay

test/TEST-13-ENC-RAID-LVM/create-root.sh

@@ -9,9 +9,9 @@ udevadm control --reload
 # save a partition at the beginning for future flagging purposes
 sfdisk /dev/sda <<EOF
 ,4M
-,25M
+,43M
-,25M
+,43M
-,25M
+,43M
 EOF
 udevadm settle
 printf test >keyfile

test/TEST-13-ENC-RAID-LVM/test.sh

@@ -59,7 +59,7 @@ test_run() {
 test_setup() {
     # Create the blank file to use as a root filesystem
     rm -f -- $TESTDIR/root.ext2
-    dd if=/dev/null of=$TESTDIR/root.ext2 bs=1M seek=80
+    dd if=/dev/null of=$TESTDIR/root.ext2 bs=1M seek=134
 
     kernel=$KVERSION
     # Create what will eventually be our root filesystem onto an overlay

test/TEST-14-IMSM/create-root.sh

@@ -32,9 +32,9 @@ sfdisk -g /dev/mapper/isw*Test0
 # save a partition at the beginning for future flagging purposes
 sfdisk --no-reread /dev/mapper/isw*Test0 <<EOF
 ,4M
-,20M
+,28M
-,20M
+,28M
-,20M
+,28M
 EOF
 
 udevadm settle

test/TEST-14-IMSM/test.sh

@@ -53,8 +53,8 @@ test_setup() {
     rm -f -- $TESTDIR/disk1
     rm -f -- $TESTDIR/disk2
     dd if=/dev/null of=$TESTDIR/root.ext2 bs=1M seek=1
-    dd if=/dev/null of=$TESTDIR/disk1 bs=1M seek=80
+    dd if=/dev/null of=$TESTDIR/disk1 bs=1M seek=104
-    dd if=/dev/null of=$TESTDIR/disk2 bs=1M seek=80
+    dd if=/dev/null of=$TESTDIR/disk2 bs=1M seek=104
 
     kernel=$KVERSION
     # Create what will eventually be our root filesystem onto an overlay

test/TEST-17-LVM-THIN/create-root.sh

@@ -8,16 +8,16 @@ udevadm control --reload
 # save a partition at the beginning for future flagging purposes
 sfdisk /dev/sda <<EOF
 ,4M
-,25M
+,29M
-,25M
+,29M
-,25M
+,29M
 EOF
 udevadm settle
 for i in sda2 sda3 sda4; do
 lvm pvcreate -ff  -y /dev/$i ;
 done && \
 lvm vgcreate dracut /dev/sda[234] && \
-lvm lvcreate -l 16  -T dracut/mythinpool && \
+lvm lvcreate -l 17  -T dracut/mythinpool && \
 lvm lvcreate -V1G -T dracut/mythinpool -n root && \
 lvm vgchange -ay && \
 mke2fs /dev/dracut/root && \

test/TEST-17-LVM-THIN/test.sh

@@ -19,7 +19,7 @@ test_run() {
 
 test_setup() {
     # Create the blank file to use as a root filesystem
-    dd if=/dev/null of=$TESTDIR/root.ext2 bs=1M seek=80
+    dd if=/dev/null of=$TESTDIR/root.ext2 bs=1M seek=92
 
     kernel=$KVERSION
     # Create what will eventually be our root filesystem onto an overlay

test/TEST-30-ISCSI/test.sh

@@ -109,9 +109,9 @@ test_setup() {
     fi
 
     # Create the blank file to use as a root filesystem
-    dd if=/dev/null of=$TESTDIR/root.ext3 bs=1M seek=40
+    dd if=/dev/null of=$TESTDIR/root.ext3 bs=1M seek=45
-    dd if=/dev/null of=$TESTDIR/iscsidisk2.img bs=1M seek=40
+    dd if=/dev/null of=$TESTDIR/iscsidisk2.img bs=1M seek=45
-    dd if=/dev/null of=$TESTDIR/iscsidisk3.img bs=1M seek=40
+    dd if=/dev/null of=$TESTDIR/iscsidisk3.img bs=1M seek=45
 
     kernel=$KVERSION
     # Create what will eventually be our root filesystem onto an overlay

test/TEST-31-ISCSI-MULTI/test.sh

@@ -131,9 +131,9 @@ test_setup() {
     fi
 
     # Create the blank file to use as a root filesystem
-    dd if=/dev/null of=$TESTDIR/root.ext3 bs=1M seek=40
+    dd if=/dev/null of=$TESTDIR/root.ext3 bs=1M seek=45
-    dd if=/dev/null of=$TESTDIR/iscsidisk2.img bs=1M seek=40
+    dd if=/dev/null of=$TESTDIR/iscsidisk2.img bs=1M seek=45
-    dd if=/dev/null of=$TESTDIR/iscsidisk3.img bs=1M seek=40
+    dd if=/dev/null of=$TESTDIR/iscsidisk3.img bs=1M seek=45
 
     kernel=$KVERSION
     # Create what will eventually be our root filesystem onto an overlay