move dasd initialization script and rules to s390utils

The primary source for dasd initialization script and udev rules is
now in s390utils package. The s390utils-base subpackage, that carries
the required files, is always installed on s390/s390x, because it's
part of the Core group in comps.

Signed-off-by: Dan Horák <dan@danny.cz>

modules.d/95dasd/56-dasd.rules

@@ -1,16 +0,0 @@
-ACTION=="add", SUBSYSTEM=="drivers", KERNEL=="dasd-eckd", RUN+="/sbin/dasdconf.sh"
-ACTION=="add", SUBSYSTEM=="drivers", KERNEL=="dasd-fba", RUN+="/sbin/dasdconf.sh"
-
-# This list should be autogenerated with "modinfo dasd_{eckd,fba}_mod"
-ACTION=="add", SUBSYSTEM=="ccw", ATTR{modalias}=="ccw:t1750m*dt3380dm*", RUN+="/sbin/dasdconf.sh"
-ACTION=="add", SUBSYSTEM=="ccw", ATTR{modalias}=="ccw:t1750m*dt3390dm*", RUN+="/sbin/dasdconf.sh"
-ACTION=="add", SUBSYSTEM=="ccw", ATTR{modalias}=="ccw:t2107m*dt3380dm*", RUN+="/sbin/dasdconf.sh"
-ACTION=="add", SUBSYSTEM=="ccw", ATTR{modalias}=="ccw:t2107m*dt3390dm*", RUN+="/sbin/dasdconf.sh"
-ACTION=="add", SUBSYSTEM=="ccw", ATTR{modalias}=="ccw:t9343m*dt9345dm*", RUN+="/sbin/dasdconf.sh"
-ACTION=="add", SUBSYSTEM=="ccw", ATTR{modalias}=="ccw:t2105m*dt3380dm*", RUN+="/sbin/dasdconf.sh"
-ACTION=="add", SUBSYSTEM=="ccw", ATTR{modalias}=="ccw:t3990m*dt3380dm*", RUN+="/sbin/dasdconf.sh"
-ACTION=="add", SUBSYSTEM=="ccw", ATTR{modalias}=="ccw:t3880m*dt3390dm*", RUN+="/sbin/dasdconf.sh"
-ACTION=="add", SUBSYSTEM=="ccw", ATTR{modalias}=="ccw:t2105m*dt3390dm*", RUN+="/sbin/dasdconf.sh"
-ACTION=="add", SUBSYSTEM=="ccw", ATTR{modalias}=="ccw:t3990m*dt3390dm*", RUN+="/sbin/dasdconf.sh"
-ACTION=="add", SUBSYSTEM=="ccw", ATTR{modalias}=="ccw:t3880m*dt3370dm*", RUN+="/sbin/dasdconf.sh"
-ACTION=="add", SUBSYSTEM=="ccw", ATTR{modalias}=="ccw:t6310m*dt9336dm*", RUN+="/sbin/dasdconf.sh"

modules.d/95dasd/dasdconf.sh

@@ -1,94 +0,0 @@
-#!/bin/sh
-
-# config file syntax:
-# deviceno   sysfs_opts...
-#
-# Examples:
-# 0.0.0203 readonly=1 failfast=1
-# 0.0.0204
-# 0.0.0205 erplog=1
-
-[ -z "$DEVPATH" ] && exit 0
-[ "$ACTION" != "add" ] && exit 0
-
-CHANNEL=${DEVPATH##*/}
-
-CONFIG=/etc/dasd.conf
-PATH=/sbin:/bin:/usr/sbin:/usr/bin
-export PATH
-
-warn() {
-    [ -e /dev/kmsg ] && echo "<4>dasdconf.sh Warning: $@" > /dev/kmsg
-    echo "dasdconf.sh Warning: $@" >&2
-}
-
-if [ -f "$CONFIG" ]; then
-    if [ ! -d /sys/bus/ccw/drivers/dasd-eckd ] && [ ! -d /sys/bus/ccw/drivers/dasd-fba ]; then
-	#warn "No dasd-eckd or dasd-eckd loaded"
-        exit 0
-    fi
-    tr "A-Z" "a-z" < $CONFIG | while read line; do
-        case $line in
-            \#*) ;;
-            *)
-                [ -z "$line" ] && continue
-                set $line
-
-		# if we are in single add mode, only add the new CHANNEL
-		[ "$SUBSYSTEM" = "ccw" ] && [ "$1" != "$CHANNEL" ] && continue
-
-                DEVICE=$1
-                SYSFSPATH=
-
-                if [ -r "/sys/bus/ccw/drivers/dasd-eckd/$DEVICE" ]; then
-                    SYSFSPATH="/sys/bus/ccw/drivers/dasd-eckd/$DEVICE"
-                elif [ -r "/sys/bus/ccw/drivers/dasd-fba/$DEVICE" ]; then
-                    SYSFSPATH="/sys/bus/ccw/drivers/dasd-fba/$DEVICE"
-                else
-		    # if we are in single add mode, this is a failure!
-		    [ "$SUBSYSTEM" = "ccw" ] && warn "Could not find $DEVICE in sysfs"
-                    continue
-                fi
-
-		# skip already onlined devices
-		if [ "$(cat $SYSFSPATH/online)" = "1" ]; then
-		    if [ "$SUBSYSTEM" = "ccw" ]; then
-		        # if we are in single add mode, we should not touch the device
-			warn "$DEVICE is already online, not configuring"
-			exit 0
-		    fi
-		    continue
-		fi
-
-                shift
-                while [ -n "$1" ]; do
-                    (
-                        attribute="$1"
-                        IFS="="
-                        set $attribute
-
-                        if [ "$1" = "use_diag" ]; then
-			    # this module better only returns after
-			    # all sysfs entries have the "use_diag" file
-                            modprobe dasd_diag_mod
-                        fi
-
-                        if [ -r "$SYSFSPATH/$1" ]; then
-                            echo $2 > $SYSFSPATH/$1 || warn "Could not set $1=$2 for $DEVICE"
-                        else
-			    warn "$1 does not exist for $DEVICE"
-                        fi
-                    )
-                    shift
-                done
-		
-		# Now, put the device online
-                echo 1 > $SYSFSPATH/online || echo "Could not activate $DEVICE"
-
-		# if we are in single add mode, we are done
-		[ "$SUBSYSTEM" = "ccw" ] && exit 0
-                ;;
-        esac
-    done
-fi
-exit 0

modules.d/95dasd/install

@@ -1,8 +1,8 @@
 #!/bin/bash
 inst_hook cmdline 30 "$moddir/parse-dasd.sh"
 dracut_install tr
-inst "$moddir/dasdconf.sh" /sbin/dasdconf.sh
-inst_rules "$moddir/56-dasd.rules"
 if [[ $hostonly ]]; then
     inst /etc/dasd.conf
 fi
+inst /sbin/dasdconf.sh
+inst_rules 56-dasd.rules